DALI Oberon On-Wall is a 2-way Passive Bass Reflex On-wall speaker by DALI. It was released in 2024. It features a 1.14" Soft-Dome Tweeter and 1 x 5.25" Wood fibre Woofer.
DALI publishes the driver complement as: 1 x 5¼ inch low/mid, 1 x 29 mm soft dome high frequency.
The speaker has a frequency range of 55-26k Hz and a sensitivity of 87 dB.
DALI's Oberon Series of Loudspeakers
Oberon On-Wall is a member of DALI's Oberon series of Passive speakers. Oberon is DALI's hugely popular affordable range, Danish-designed speakers with wood-fibre cones and a wide, easy-to-place sound. Below you can see the main specs of these speakers.
See all 8 DALI Oberon models compared »
DALI Oberon Series Speakers
DALI Oberon Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the DALI Oberon On-Wall Speaker
DALI Oberon On-Wall has a Frequency response range of 55-26k Hz at ±0.0dB and Power Range of 25-100 watts. With a minimum frequency of 55 Hz, Oberon On-Wall delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Visit our Powered Subwoofers section to find out more about the available subwoofer options.
Here we have a comparison of how Oberon On-Wall's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
On-wall Speakers
High Frequency
On-wall Speakers
Crossover frequency of the DALI Oberon On-Wall?
The Crossover frequency of the Oberon On-Wall is set to 2100Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
DALI Oberon On-Wall's nominal impedance level is
6 ohms and has a sensitivity of
87 dB.
Sensitivity
On-wall Speakers
Nominal Impedance of the 6 Ohms makes the DALI Oberon On-Wall a relatively difficult to drive speaker compared to more frequently found 8 ohms speakers from nominal Impedance perspective.
Sensitivity
With a sensitivity level of only 87 dB, DALI Oberon On-Wall is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Browse all integrated amplifiers
Input Type
Oberon On-Wall features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
DALI Oberon On-Wall External Dimensions and Weight
DALI Oberon On-Wall has external dimensions of (Height x Width x Depth) .
Weight
All On-wall Speakers
Cabinet type and Materials
DALI Oberon On-Wall has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the DALI Oberon On-Wall come with a Grille?
Oberon On-Wall comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the DALI Oberon On-Wall.
Official Product Page
Official manufacturer's product page for the DALI Oberon On-Wall speaker can be found below:
Official Product Page for DALI Oberon On-Wall
Warranty
5 Years of parts warranty and 5 Years of labor warranty is generally provided by the manufacturer.