ATC SCM19A is a 2-way Powered Sealed Floor-standing speaker by ATC. It was released in 2018. The built-in power amplifier saves space & eliminates the need to connect ATC SCM19A to a stereo receiver or external power amp. It features a 0.98" Tweeter and 1 x 5.91" Woofer. ATC lists the drivers as HF ATC 25mm dual suspension Tweeter, Mid/LF ATC 150mm SL. The speaker has a frequency range of 54-22k Hz. ATC SCM19A has an MSRP of 8999$ per pair.
Frequency Response of the ATC SCM19A Speaker
ATC SCM19A has a Frequency response range of 54-22k Hz. With a minimum frequency of 54 Hz, SCM19A delivers moderate bass depth so depending on your use case, you might want to consider adding a subwoofer to your system.
Here we have a comparison of how SCM19A's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the ATC SCM19A?
Crossover frequency of the ATC SCM19A?
The crossover frequency of the SCM19A is set to 2.5kHz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Inputs and Outputs
- USB Port:
- Subwoofer Output
- Digital Input:
- HDMI Input:
- Headphone Jack:
- Ethernet Port
ATC SCM19A External Dimensions and Weight
ATC SCM19A has external dimensions of (Height x Width x Depth) 38.58 x 14.57 x 13.54inch (980.0 x 370.0 x 344.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of ATC SCM19A is approximately 1272.8cm2 / 197.3inch2.
Millimetres are hard to picture, so here is the ATC SCM19A drawn to scale next to the Fyne Audio Vintage Classic X, the speaker our readers compare it with most often.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Fyne Audio Vintage Classic X needs about 35% more floor or shelf area. Fyne Audio Vintage Classic X is 37mm deeper, so it stands that much further out from the wall. ATC SCM19A is 63mm taller.
Full comparison: ATC SCM19A vs Fyne Audio Vintage Classic X ›
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe ATC SCM19A weighs 31.00kg / 68.2lbs per piece. Here is a comparison of how SCM19A's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $10,000
Cabinet type and Materials
ATC SCM19A has a
Sealed type cabinet.
Does the ATC SCM19A come with a Grille?
SCM19A comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the ATC SCM19A.
Official Product Page
Official manufacturer's product page for the ATC SCM19A speaker can be found below:
Official Product Page for ATC SCM19A