The AVA35 is a home theater receiver by ARCAM. It is a 9-channel design using a G output stage. A minimum impedance of 4 ohms makes it compatible with a wide range of loudspeakers. The ARCAM AVA35 has an MSRP of $7,000.
ARCAM replaced the older ARCAM AVR31 with this model. Follow the link to read our detailed comparison of these models:
Compare ARCAM AVA35 vs ARCAM AVR31
Performance Specs
One of the most important factors when deciding on a home theater receiver is its power ratings and compatibility with your speaker's impedance requirements. The ARCAM AVA35 is rated at 145 watts RMS into 8-ohms (2 channels driven).
Here are the main highlights of its performance specs:
- 145 watts into 8-ohms
- 4-ohms Min Impedance (allows compatibility with a wide range of loudspeakers)
How loud will 145 watts actually play in your room? →
Wiring more than one pair of speakers to it? Check the load first →
Need more power?
ARCAM AVA35 is rated at 145 watts into 8 ohms, which puts it in our 121 to 180 watts band. The next band up is Over 180 watts, which is worth about 2.3dB more output. That is a real difference in headroom on peaks, and a modest one in how loud the system plays - power and loudness are not the same thing.
Before buying watts, check what your speakers actually need: the amp and speaker matcher works it out from their sensitivity, impedance and your room. Plenty of systems are better served by the 91 to 120 watts band and better speakers.
When pairing the ARCAM AVA35 with a passive Bookshelf (Stand mount) or Passive Floor Standing (Tower) speaker, you have to check if their Max Power Range is below the max wattage of the amp for the given impedance levels.
Operating your amp outside of this max range may damage the speakers.
Inputs and Outputs
Besides the performance specs of the ARCAM AVA35, the next important feature set that you have to evaluate is the input and output selections that it offers.
ARCAM AVA35 has total of 3 Analog inputs .
Inputs
- Total Number of Analog Inputs: 3
- 2 Optical Digital Input
- 2 Coaxial Digital Input
- USB Input
Outputs
- Speaker Outputs
- Subwoofer Output (1-5 (assignable))
- HDMI Output (2)
Phono Input
ARCAM AVA35 doesn't have a phono input so in order to play your vinyl albums, ARCAM AVA35 has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
Surround Sound and Channels
ARCAM AVA35 is a 9.4-channel receiver, powering 9 speakers directly - the .4 is 4 subwoofer outputs, not extra amplified channels. It decodes Dolby Atmos, DTS:X.
Video and HDMI
An AV receiver is the switch every source passes through on its way to the
television, so what it can carry sets a ceiling on the rest of the system.
Room Correction
ARCAM AVA35 includes
Dirac Live.
Room correction measures the speakers where they actually stand and corrects
for what the room does to them, which in a multi-channel system matters more
than in a stereo one - the surround and height channels are usually the ones
placed where they fit rather than where they should be.
ARCAM AVA35 Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓Power is quoted honestly both ways: 145 watts with two channels driven and 110 with all of them, which is the figure that applies to a film.
- ✓9 channels of amplification on board.
- ✓7 HDMI inputs and 2 outputs, HDMI 2.1a.
- ✓Decodes Dolby Atmos and DTS:X.
- ✓Room correction: Dirac Live.
- ✓Subwoofer outputs: 1-5 (assignable).
- ✗At 22.7kg it needs a shelf with ventilation above it; receivers run warm and this one has mass to match.
ARCAM AVA35 External Dimensions and Weight
ARCAM AVA35 has external dimensions of (H x W x D) (171.5 x 433.3 x 477.8mm ). The unit weighs
22.7 kg (50 lbs).
Base Surface Area
Base surface area of a home theater receiver may become an important decision factor when the space in your room or desk is limited.
The base area of the ARCAM AVA35 is approximately 2070.3cm2 / 320.9inch2.
- Width: 433.3mm (17.06")
- Height: 171.5mm (6.75")
- Depth: 477.8mm (18.81")
- Weight: 22.7 kg (50 lbs)
- Base Surface Area: ~2070.3cm2 / 320.9inch2
- Volume: ~35.5 liter / 9.4 gallon
| General |
| Brand |
ARCAM |
| Full Model Name |
ARCAM AVA35 |
| Amplifier Type |
Home Theater Receiver |
| Number of Channels |
9 |
| Amp Class |
G |
| Amplifier Technology |
Solid State |
| Performance |
| Watts RMS per Channel into 8-ohms |
145 watts |
| Watts RMS per Channel into 6-ohms |
N/A |
| Watts RMS per Channel into 4-ohms |
N/A |
| Frequency Bandwidth |
|
| THD |
|
| Minimum Impedance |
4 |
| Signal to Noise Ratio |
N/A |
| CONNECTIONS |
| Total Analog Inputs |
3 |
| Phono Input |
No |
| Optical Digital Inputs |
2 |
| Coaxial Digital Inputs |
2 |
| USB Input |
Yes |
| Preamp Outputs |
No |
| Removable Power Cord |
|
| PHYSICAL SPECS |
| Height |
171.5mm (6.75") |
| Width |
433.3mm (17.06") |
| Depth |
477.8mm (18.81") |
| Weight |
22.7 kg (50 lbs) |
| OTHER |
| Parts Warranty |
|
| Labor Warranty |
|
What amplifier class is the ARCAM AVA35?
The ARCAM AVA35 uses a Class G amplifier design. Class G/H works like a Class A/B amplifier but switches between voltage rails as the music demands, improving efficiency without changing the character of the sound.
Can I connect a turntable to the ARCAM AVA35?
No. The ARCAM AVA35 has no phono input, so a turntable needs an external phono preamp (or a deck with one built in) before it can be connected.
Can I connect a subwoofer to the ARCAM AVA35?
Yes. The ARCAM AVA35 has a 1-5 (assignable) subwoofer output, so you can add a powered subwoofer to extend the low end below what your main speakers manage.
How much does the ARCAM AVA35 cost?
The ARCAM AVA35 has a manufacturer's list price (MSRP) of $7,000.
Was this receiver review useful?
Tell us what is missing or wrong and we will fix it.