The ZH1 is a headphone amplifier by Fosi Audio. It was released in September 2026. It has a built-in DAC (ESS ES9039Q2M, XMOS XU316 USB, fully balanced), so you can play digital sources directly with no separate DAC unit needed. The ZH1 has an MSRP of $150.
Performance Specs
The ZH1 drives headphones rather than loudspeakers, so its power is quoted into headphone impedances instead of into 8 ohms: 2,300 mW balanced 4.4 mm @ 32 ohms, 589 mW single-ended @ 32 (THD+N <1%); 8-300 ohm headphones. Fosi Audio quotes a THD (Total Harmonic Distortion) of <=0.0002% (lower is better).
Here are the main highlights of its performance specs:
- 124dB Signal to Noise Ratio
Inputs and Outputs
Besides the performance specs of the ZH1, the next important feature set that you have to evaluate is the input and output selections that it offers.
Inputs
- 1 Optical Digital Input
- 1 Coaxial Digital Input
- USB Input:
Outputs
- Preamp Outputs
- 1/4,3.5 Headphone Output
Bluetooth Connectivity
ZH1 doesn't have bluetooth connectivity feature. In order to stream your music via bluetooth, the easiest way is to connect an external bluetooth receiver to your ZH1. Two bluetooth receivers that we recommend are the
iFi Zen Blue V2 and the
Audioengine B1.
Among the amps in the same price range, these are the 5 amps that have Bluetooth Connectivity:
Phono Input
ZH1 doesn't have a phono input so in order to play your vinyl albums, ZH1 has to be paired with a Phono Preamp that is MM (Moving Magnet) or/and MC (Moving COil) depending on your cartridge type.
DAC and Digital Music
The ZH1's built-in DAC allows the connection of digital sources directly, eliminating the need for an external DAC. The DAC chip that is used in the ZH1 is the
ESS ES9039Q2M, XMOS XU316 USB, fully balanced.
ZH1 Pros and Cons
Drawn from the published figures on this page, not from listening.
- ✓Delivers 2,300 mW into 32 ohms, comfortably more than most headphones need.
- ✓A preamp output means it can also feed active speakers or a power amplifier, so it is not limited to headphone listening.
- ✓A built-in DAC takes a digital source directly, with no separate converter to buy or find space for.
- ✗It has no speaker terminals - this drives headphones, not loudspeakers.
ZH1 External Dimensions and Weight
ZH1 has external dimensions of (H x W x D) 1-15/16 x 5-5/16 x 4-3/4 inch (50 x 135 x 120 mm ). The unit weighs
0.35 kg (0.8 lbs).
Base Surface Area
Base surface area of an integrated amplifier may become an important decision factor when the space in your room or desk is limited.
The base area of the ZH1 is approximately 162.0cm2 / 25.1inch2.
- Width: 135.0mm (5-5/16")
- Height: 50.0mm (1-15/16")
- Depth: 120.0mm (4-3/4")
- Weight: 0.35 kg (0.8 lbs)
- Base Surface Area: ~162.0cm2 / 25.1inch2
- Volume: ~0.8 liter / 0.2 gallon
Official Product Page
Official manufacturer's product page for the Fosi Audio ZH1 Integrated Amplifier can be found below:
Official Product Page for ZH1
| General |
| Brand |
Fosi Audio |
| Full Model Name |
Fosi Audio ZH1 |
| Release Date |
September 2026 |
| Amplifier Type |
Headphone Amplifier |
| Amp Class |
Class AB |
| Amplifier Technology |
Solid State |
| Performance |
| Headphone Output Power |
2,300 mW balanced 4.4 mm @ 32 ohms, 589 mW single-ended @ 32 (THD+N <1%); 8-300 ohm headphones |
| Output Impedance |
N/A |
| Frequency Bandwidth |
|
| THD |
<=0.0002% |
| Signal to Noise Ratio |
124 dB |
| Digital Music |
| Built-in DAC |
Yes |
| DAC Specs |
ESS ES9039Q2M, XMOS XU316 USB, fully balanced |
| Bluetooth |
No |
| WiFi |
No |
| CONNECTIONS |
| Total Analog Inputs |
0 |
| Phono Input |
No |
| Optical Digital Inputs |
1 |
| Coaxial Digital Inputs |
1 |
| USB Input |
Yes |
| USB Type |
USB-C |
| Preamp Outputs |
Yes |
| Headphone Output |
1/4,3.5 |
| Removable Power Cord |
|
| PHYSICAL SPECS |
| Height |
50.0mm (1-15/16") |
| Width |
135.0mm (5-5/16") |
| Depth |
120.0mm (4-3/4") |
| Weight |
0.35 kg (0.8 lbs) |
| OTHER |
| Screen |
Yes |
| Parts Warranty |
|
| Labor Warranty |
|
Does the ZH1 use vacuum tubes?
No. The ZH1 is a solid-state amplifier - there are no vacuum tubes in it.
What amplifier class is the ZH1?
The ZH1 uses a Class AB amplifier design. Class A/B is the traditional linear design: it runs warmer and is less efficient than Class D, but it is long valued for its natural, low-distortion sound.
Does the ZH1 have a built-in DAC?
Yes. The ZH1 has a built-in DAC (ESS ES9039Q2M, XMOS XU316 USB, fully balanced), so you can feed it a digital source directly without buying a separate converter.
Can I connect a turntable to the ZH1?
No. The ZH1 has no phono input, so a turntable needs an external phono preamp (or a deck with one built in) before it can be connected.
Does the ZH1 have Bluetooth?
No. The ZH1 does not have Bluetooth built in; you would need an external Bluetooth receiver connected to one of its inputs.
Does the ZH1 have a headphone output?
Yes. The ZH1 has 1/4-inch and 3.5mm headphone outputs on the front panel for private listening.
How much does the ZH1 cost?
The ZH1 has a manufacturer's list price (MSRP) of $150.
Was this amplifier review useful?
Tell us what is missing or wrong and we will fix it.