In this review, we will be comparing two different types of speakers by Sonus faber. Sonus faber Sonetto Wall is a On-wall speaker whereas the Sonetto III G2 is a Floor-standing speaker.
Let's have a brief look at the main features
of Sonus faber Sonetto Wall and Sonus faber Sonetto III G2 first before getting into our more
detailed comparison.
| Key Specs | Sonus faber Sonetto Wall | Sonus faber Sonetto III G2 |
|---|
| Brand | Sonus faber
Italy · founded 1983 | Sonus faber
Italy · founded 1983 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1.1" Soft-Dome | 1.1" Soft-dome |
|---|
| Woofer | 6.5" Paper | 2 x 6.5" Paper Pulp |
|---|
| Frequency response | 60-40k Hz | 38-40k Hz |
|---|
| Sensitivity | 87 dB | 88 dB |
|---|
| Impedance | 4 ohms | 4 ohms |
|---|
| Power range | 30-200 watts | 50-280 watts |
|---|
| Weight | 6.80kg / 15lbs | 25.85kg / 56.9lbs |
|---|
| Dimensions (H x W x D) | 17-3/16" x 10-11/16" x 6-5/8"
437.0 x 271.0 x 168.0mm | 42-1/16" x 11-5/16" x 14-5/16"
1069.0 x 288.0 x 364.0mm |
|---|
Sonetto Wall and Sonetto III G2 are members of Sonus faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Sonetto Series
History
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both Sonetto Wall and Sonetto III G2 are 2-way speakers.
Sonus faber Sonetto WallSonus faber Sonetto III G2
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Sonus faber Sonetto Wall |
Sonus faber Sonetto III G2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
2 x 6.5-inch
|
Sonetto Wall features a 1.1" Silk Soft-Dome Tweeter and 1 x 6.5" Paper Woofer with a Crossover frequency at 3100 Hz. On the other hand, the Sonetto III G2 features a 1.1" Soft-dome Tweeter and 2 x 6.5" Paper Pulp Woofer.
Frequency Response
Sonetto Wall has a frequency range of 60-40k Hz whereas Sonetto III G2 has a frequency range of 38-40k Hz. With a minimum frequency of 38Hz, the Sonetto III G2 can go significantly deeper on the low side and provide stronger bass compared to the Sonetto Wall's min frequency of 60Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the On-wall class in our database.
Low Frequency
On-wall Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto Wall and Sonetto III G2 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonetto Wall sensitivity is rated at 87 dB and the Sonetto III G2's is at 88 dB. This 1 dB difference makes the Sonus faber Sonetto III G2 a more sensitive speaker compared to Sonus faber Sonetto Wall, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto Wall and the Sonetto Wall can provide this impedance level.
Sensitivity
On-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Sonetto III G2 can handle a max power of 280 watts RMS, whereas Sonetto Wall has a max power handling value of 200 watts RMS, 80 watts less than the Sonetto III G2.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Sonus faber Sonetto III G2
Input Type and Bi-Amping / Bi-Wiring
Both Sonetto Wall and Sonetto III G2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Sonetto Wall's and Sonus faber Sonetto III G2's external dimensions. Sonus faber Sonetto Wall has external dimensions of 437.0 x 271.0 x 168.0mm (17-3/16 x 10-11/16 x 6-5/8inch) whereas Sonus faber Sonetto III G2 has external dimensions of 1069.0 x 288.0 x 364.0mm (42-1/16inch x 11-5/16inch x 14-5/16inch).
Sonus faber Sonetto III G2 is clearly the larger of the two speakers. Its body is 17mm wider, 632mm taller and 196mm deeper than Sonus faber Sonetto Wall.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
Sonus faber Sonetto III G2 needs about 130% more floor or shelf area. Sonus faber Sonetto III G2 is 196mm deeper, so it stands that much further out from the wall. Sonus faber Sonetto III G2 is 632mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Sonetto Wall is approximately 455.3cm2 / 70.6inch2 and base area of the Sonus faber Sonetto III G2 is approximately 1048.3cm2 / 162.5inch2. The Sonetto Wall requires 57% less surface area than the Sonetto III G2 which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus faber Sonetto III G2?
Here are the items that come with the Sonetto III G2:
- 2 Floorstanding loudspeakers
- 6 Grilles
- 4 Jumper-straps (pre-installed)
- 2 Binding-post covers (pre-installed)
- 8 Rubber feet
- 8 Spikes 8 Protective discs
- 8 Locking washers
- Wrench
- Dust cloth