In this review, we will be comparing two different type of speakers by Sonus faber. Sonus faber Sonetto Wall is a On-wall speaker whereas the Sonetto V is a Floor-standing speaker.
Let's have a brief look at the main features
of Sonus faber Sonetto Wall and Sonus Sonetto V first before getting into our more
detailed comparison.
Sonus faber Sonetto Wall Key Specs
- 2-way Design
- 1.1" Soft-Dome Tweeter
- 6.5" Paper Woofer
- 60-40k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-200watts
- Weight:6.80kg
- Dimensions (H x W x D): 17-3/16" x 10-11/16" x 6-5/8" ( 437.0 x 271.0 x 168.0mm )
Sonus Sonetto V Key Specs
- 3-way Design
- 1.15" high definition DAD Dome Tweeter
- 6" Midrange
- 2 x 7" aluminum cone Woofer
- 6" Midrange
- 38-25k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:22.60kg
- Dimensions (H x W x D): 42" x 10" x 16" ( 1072.0 x 258.0 x 409.0mm )
Sonetto Wall and Sonetto V are members of Sonus faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Sonetto Series
History
What size room are the Sonus faber Sonetto Wall and Sonus Sonetto V speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Sonetto Wall |
Sonus Sonetto V |
| Near-field |
Good |
Bad |
| Small Room |
Good |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Good |
| Very Large Room |
No way |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus faber Sonetto Wall and Sonus Sonetto V compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Sonetto Wall is a 2-way design whereas the Sonetto V is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Sonus faber Sonetto Wall |
Sonus Sonetto V |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.1-inch
|
1.15-inch
|
|
Midrange
|
- |
1 x 6-inch |
|
Woofer
|
1 x 6.5-inch
|
2 x 7-inch
|
Sonetto Wall features a 1.1" Silk Soft-Dome Tweeter and 1 x 6.5" Paper Woofer with a Crossover frequency at 3100 Hz. On the other hand, the Sonetto V features a 1.15" high definition DAD Dome Tweeter , a 6" Midrange and 2 x 7" aluminum cone Woofer with a Crossover frequency at 235 and 3.000 Hz.
Frequency Response
Sonetto Wall has a frequency range of 60-40k Hz whereas Sonetto V has a frequency range of 38-25k Hz. With a minimum frequency of 38Hz, the Sonetto V can go significantly deeper on the low side and provide stronger bass compared to the Sonetto Wall's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the On-wall class in our database.
Low Frequency
On-wall Speakers
High Frequency
On-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto Wall and Sonetto V have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonetto Wall sensitivity is rated at 87 dB and the Sonetto V's is at 90 dB. This 3 dB difference makes the Sonus Sonetto V a more sensitive speaker compared to Sonus faber Sonetto Wall, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto Wall and the Sonetto Wall can provide this impedance level.
Sensitivity
On-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Sonetto Wall can handle a max power of 300 watts RMS from the amp the whereas Sonetto Wall has a max power handling value of 200 watts RMS , 100 watts less than the Sonetto V.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Sonetto V features Binding post posts which make bi-amping or bi-wiring possible. Sonetto Wall has a Binding post which doesn't feature bi-amping/bi-wiring.
Sonus Sonetto V's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Sonetto Wall's and Sonus Sonetto V's external dimensions. Sonus faber Sonetto Wall has external dimensions of 437.0 x 271.0 x 168.0mm ( 17-3/16 x 10-11/16 x 6-5/8inch) whereas Sonus Sonetto V has external dimensions of 1072.0 x 258.0 x 409.0mm ( 42 x 10 x 16inch) .
Sonus faber Sonetto Wall is 635mm shorter and 241mm less deeper than Sonus Sonetto V but it is also 13mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Sonetto Wall is approximately 455.3cm2 / 70.6inch2 and base area of the Sonus Sonetto V is approximately 1055.2cm2 / 163.6inch2. The Sonetto Wall requires 57% less surface area than the Sonetto V which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus Sonetto V?
Here are the items that come with the Sonetto V:
- 8 Spikes
- 8 Under Spikes
- 8 Spike locks
- 2 Masks
- 2 Fabric dust guards
- 2 Basis
- 16 Locking screws
- 2 Jumpers
- 1 Allen Wrench
- 1 Manual