In this review, we will be comparing two different type of speakers by Sonus faber. Sonus faber Sonetto Wall is a On-wall speaker whereas the Sonetto CI is a Center Channel speaker.
Let's have a brief look at the main features
of Sonus faber Sonetto Wall and Sonus Sonetto Center I first before getting into our more
detailed comparison.
Sonus faber Sonetto Wall Key Specs
- 2-way Design
- 1.1" Soft-Dome Tweeter
- 6.5" Paper Woofer
- 60-40k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-200watts
- Weight:6.80kg
- Dimensions (H x W x D): 17-3/16" x 10-11/16" x 6-5/8" ( 437.0 x 271.0 x 168.0mm )
Sonus Sonetto Center I Key Specs
- 2-way Design
- 1.15" high definition DAD Dome Tweeter
- 2 x 6" aluminum cone Woofer
- 60-25k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-200watts
- Weight:6.50kg
- Dimensions (H x W x D): 10" x 20" x 12" ( 242.0 x 495.0 x 303.0mm )
Sonetto Wall and Sonetto CI are members of Sonus faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Sonetto Series
History
What size room are the Sonus faber Sonetto Wall and Sonus Sonetto Center I speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Sonetto Wall |
Sonus Sonetto Center I |
| Near-field |
Good |
Poor |
| Small Room |
Good |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Poor |
Average |
| Very Large Room |
No way |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus faber Sonetto Wall and Sonus Sonetto Center I compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Sonetto Wall and Sonetto CI are 2-way speakers.
| Driver |
Sonus faber Sonetto Wall |
Sonus Sonetto Center I |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.15-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
2 x 6-inch
|
Sonetto Wall features a 1.1" Silk Soft-Dome Tweeter and 1 x 6.5" Paper Woofer with a Crossover frequency at 3100 Hz. On the other hand, the Sonetto CI features a 1.15" high definition DAD Dome Tweeter and 2 x 6" aluminum cone Woofer with a Crossover frequency at 1.550 Hz.
Frequency Response
Sonetto Wall has a frequency range of 60-40k Hz whereas Sonetto CI has a frequency range of 60-25k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the On-wall class in our database.
Low Frequency
On-wall Speakers
High Frequency
On-wall Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto Wall and Sonetto CI have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonetto Wall sensitivity is rated at 87 dB and the Sonetto CI's is at 90 dB. This 3 dB difference makes the Sonus Sonetto Center I a more sensitive speaker compared to Sonus faber Sonetto Wall, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto Wall and the Sonetto Wall can provide this impedance level.
Sensitivity
On-wall Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Sonetto CI features Binding post posts which make bi-amping or bi-wiring possible. Sonetto Wall has a Binding post which doesn't feature bi-amping/bi-wiring.
Sonus Sonetto Center I's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Sonetto Wall's and Sonus Sonetto Center I's external dimensions. Sonus faber Sonetto Wall has external dimensions of 437.0 x 271.0 x 168.0mm ( 17-3/16 x 10-11/16 x 6-5/8inch) whereas Sonus Sonetto Center I has external dimensions of 242.0 x 495.0 x 303.0mm ( 10 x 20 x 12inch) .
Sonus faber Sonetto Wall is 224mm narrower and 135mm less deeper than Sonus Sonetto Center I but it is also 195mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Sonetto Wall is approximately 455.3cm2 / 70.6inch2 and base area of the Sonus Sonetto Center I is approximately 1499.9cm2 / 232.5inch2. The Sonetto Wall requires 70% less surface area than the Sonetto CI which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus Sonetto Center I?
Here are the items that come with the Sonetto CI:
- 1 Masks
- 1 Fabric dust guards
- 1 Basis
- 2 Jumpers
- 1 Manual