In this review, we will be comparing two different type of speakers by Sonus faber. Sonus faber Sonetto III G2 is a Floor-standing speaker whereas the Sonetto CI is a Center Channel speaker.
Let's have a brief look at the main features
of Sonus faber Sonetto III G2 and Sonus Sonetto Center I first before getting into our more
detailed comparison.
Sonus faber Sonetto III G2 Key Specs
- 2-way Design
- 1.1" Soft-dome Tweeter
- 2 x 6.5" Paper Pulp Woofer
- 38-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-280watts
- Weight:25.85kg
- Dimensions (H x W x D): 42-1/16" x 11-5/16" x 14-5/16" ( 1069.0 x 288.0 x 364.0mm )
Sonus Sonetto Center I Key Specs
- 2-way Design
- 1.15" high definition DAD Dome Tweeter
- 2 x 6" aluminum cone Woofer
- 60-25k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-200watts
- Weight:6.50kg
- Dimensions (H x W x D): 10" x 20" x 12" ( 242.0 x 495.0 x 303.0mm )
Sonus faber Sonetto III G2 and Sonetto CI are members of Sonus faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Sonetto Series
History
In the following sections, we will get into more detail in order to better understand how the Sonus faber Sonetto III G2 and Sonus Sonetto Center I compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Sonus faber Sonetto III G2 and Sonetto CI are 2-way speakers.
| Driver |
Sonus faber Sonetto III G2 |
Sonus Sonetto Center I |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.1-inch
|
1.15-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 6-inch
|
Sonus faber Sonetto III G2 features a 1.1" Soft-dome Tweeter and 2 x 6.5" Paper Pulp Woofer . On the other hand, the Sonetto CI features a 1.15" high definition DAD Dome Tweeter and 2 x 6" aluminum cone Woofer with a Crossover frequency at 1.550 Hz.
Frequency Response
Sonus faber Sonetto III G2 has a frequency range of 38-40k Hz whereas Sonetto CI has a frequency range of 60-25k Hz. With a minimum frequency of 38Hz, the Sonus faber Sonetto III G2 can go significantly deeper on the low side and provide stronger bass compared to the Sonetto CI's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Sonus faber Sonetto III G2
High Frequency
Floor-standing Speakers
Sonus faber Sonetto III G2
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonus faber Sonetto III G2 and Sonetto CI have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonus faber Sonetto III G2 sensitivity is rated at 88 dB and the Sonetto CI's is at 90 dB. This 2 dB difference makes the Sonus Sonetto Center I a more sensitive speaker compared to Sonus faber Sonetto III G2, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonus faber Sonetto III G2 and the Sonus faber Sonetto III G2 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Sonus faber Sonetto III G2
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Sonus faber Sonetto III G2 can handle a max power of 280 watts RMS from the amp the whereas Sonetto CI has a max power handling value of 200 watts RMS, 80 watts less than the Sonus faber Sonetto III G2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Sonus faber Sonetto III G2 and Sonetto CI features dual binding post speaker terminals for bi-amping or bi-wiring.
Sonus Sonetto Center I's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Sonetto III G2's and Sonus Sonetto Center I's external dimensions. Sonus faber Sonetto III G2 has external dimensions of 1069.0 x 288.0 x 364.0mm ( 42-1/16inch x 11-5/16inch x 14-5/16inch ) whereas Sonus Sonetto Center I has external dimensions of 242.0 x 495.0 x 303.0mm ( 10 x 20 x 12inch) .
Sonus Sonetto Center I is 827mm shorter and 61mm less deeper than Sonus faber Sonetto III G2 but it is also 207mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Sonetto III G2 is approximately 1048.3cm2 / 162.5inch2 and base area of the Sonus Sonetto Center I is approximately 1499.9cm2 / 232.5inch2. The Sonus faber Sonetto III G2 requires 30% less surface area than the Sonetto CI which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus faber Sonetto III G2?
Here are the items that are included inside the box of Sonus faber Sonetto III G2:
- 2 Floorstanding loudspeakers
- 6 Grilles
- 4 Jumper-straps (pre-installed)
- 2 Binding-post covers (pre-installed)
- 8 Rubber feet
- 8 Spikes 8 Protective discs
- 8 Locking washers
- Wrench
- Dust cloth
What's in the Box of Sonus Sonetto Center I?
Here are the items that come with the Sonetto CI:
- 1 Masks
- 1 Fabric dust guards
- 1 Basis
- 2 Jumpers
- 1 Manual