In this review, we will be comparing PerformaBe F226Be and PerformaBe F228Be, two Passive Floor-standing speakers by Revel
Let's have a brief look at the main features
of Revel PerformaBe F226Be and Revel PerformaBe F228Be first before getting into our more
detailed comparison.
Revel PerformaBe F226Be Key Specs
- 3-way Design
- 1" dome with proprietary acoustic lens waveguide Tweeter
- 5.25" Midrange
- 2 x 6.5" DCC Aluminum Woofer
- 50-40k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-200watts
- Weight:26.36kg
- Dimensions (H x W x D): 1050.0" x 9-13/16" x 13-3/4"( 1050.0 x 250.0 x 350.0mm )
Revel PerformaBe F228Be Key Specs
- 3-way Design
- 1" dome with proprietary acoustic lens waveguide Tweeter
- 5.25" Midrange
- 2 x 8" DCC Aluminum Woofer
- 5.25" Midrange
- 27-44k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-350watts
- Weight:37.27kg
- Dimensions (H x W x D): 1182.0" x 11-13/16" x 13-1/4"( 1182.0 x 301.0 x 337.0mm )
PerformaBe F226Be and PerformaBe F228Be are members of Revel's PerformaBe series of speakers. Below you can find the loudspeakers from this series.
Revel PerformaBe Series
History
What size room are the Revel PerformaBe F226Be and Revel PerformaBe F228Be speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Revel PerformaBe F226Be |
Revel PerformaBe F228Be |
| Near-field |
Bad |
Are you nuts? |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Poor |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Revel PerformaBe F226Be and Revel PerformaBe F228Be compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both PerformaBe F226Be and PerformaBe F228Be are 3-way speakers.
| Driver |
Revel PerformaBe F226Be |
Revel PerformaBe F228Be |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 5.25-inch |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
PerformaBe F226Be features a 1" beryllium dome with proprietary acoustic lens waveguide Tweeter , a 5.25" Midrange and 2 x 6.5" DCC Aluminum Woofer . On the other hand, the PerformaBe F228Be features a 1" beryllium dome with proprietary acoustic lens waveguide Tweeter , a 5.25" Midrange and 2 x 8" DCC Aluminum Woofer .
Frequency Response
PerformaBe F226Be has a frequency range of 50-40k Hz whereas PerformaBe F228Be has a frequency range of 27-44k Hz. With a minimum frequency of 27Hz, the PerformaBe F228Be can go significantly deeper on the low side and provide stronger bass compared to the PerformaBe F226Be's min frequency of 50Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
PerformaBe F226Be and PerformaBe F228Be have the same Impedance of 8 ohms and their sensitivity is also same at 90 dB.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
PerformaBe F226Be can handle a max power of 350 watts RMS from the amp the whereas PerformaBe F226Be has a max power handling value of 200 watts RMS , 150 watts less than the PerformaBe F228Be.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both PerformaBe F226Be and PerformaBe F228Be features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both PerformaBe F226Be and PerformaBe F228Be have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel PerformaBe F226Be's and Revel PerformaBe F228Be's external dimensions. Revel PerformaBe F226Be has external dimensions of 1050.0 x 250.0 x 350.0mm ( 41-5/16 x 9-13/16 x 13-3/4inch) whereas Revel PerformaBe F228Be has external dimensions of 1182.0 x 301.0 x 337.0mm ( 46-1/2 x 11-13/16 x 13-1/4inch) .
Revel PerformaBe F226Be is 51mm narrower and 132mm shorter than Revel PerformaBe F228Be but it is also 13mm deeper.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel PerformaBe F226Be is approximately 875.0cm2 / 135.6inch2 and base area of the Revel PerformaBe F228Be is approximately 1014.4cm2 / 157.2inch2. The PerformaBe F226Be requires 14% less surface area than the PerformaBe F228Be which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel PerformaBe F226Be weighs 26.36kg / 58lbs and the Revel PerformaBe F228Be weighs 37.27kg / 82lbs. This makes the PerformaBe F228Be 41% heavier than the PerformaBe F226Be.
Here is a comparison of how PerformaBe F226Be and PerformaBe F228Be's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Revel PerformaBe F226Be?
Here are the items that are included inside the box of PerformaBe F226Be:
Floorstanding loudspeakerGrille4 Spike feet4 Locking rings4 Washers2 Terminal jumpers (pre-installed)Foam port plugOwners Manual
What's in the Box of Revel PerformaBe F228Be?
Here are the items that come with the PerformaBe F228Be:
Floorstanding loudspeakerGrille4 Spike feet4 Locking rings4 Washers2 Terminal jumpers (pre-installed)Foam port plugOwners Manual
 Height |
1050mm
vs
1182mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
875cm2
vs
1014cm2
|
Takes less floor space |
 Price per pair* |
7700USD
vs
11000USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
350 watts
vs
200 watts
|
Handle more power from your amplifier |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
|
Low Frequency Response |
27 Hz
vs
50 Hz
|
Generates deeper bass |
 High Frequency Response |
44k Hz
vs
40k Hz
|
Generates higher frequency |
| General |
Revel PerformaBe F226Be |
Revel PerformaBe F228Be |
| Brand |
Revel |
Revel |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-200 watts |
50-350 watts |
| Sensitivity |
90 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
50-40k Hz |
27-44k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
DCC Aluminum |
DCC Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
dome with proprietary acoustic lens waveguide |
dome with proprietary acoustic lens waveguide |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5.25" |
5.25" |
| Firing Direction |
front |
front |
Physical Specs |
|
|
| Height |
1050.0mm (41.3") |
1182.0mm (46.5") |
| Width |
250.0mm (9.8") |
301.0mm (11.9") |
| Depth |
350.0mm (13.8") |
337.0mm (13.3") |
| Weight |
26.36kg (58lbs) |
37.27kg (82lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Wood/Lacquer |
Wood/Lacquer |
| Available Colors |
Gloss Black |
Gloss White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |