In this review, we will be comparing Bronze 2 and Bronze 100, two Passive Bookshelf speakers by Monitor Audio Let's have a brief look at the main features
of Monitor Audio Bronze 2 and Monitor Audio Bronze 100 first before getting into our more
detailed comparison.
Bronze 2 and Bronze 100 are members of Monitor Audio's Bronze series of speakers. Below you can find the loudspeakers from this series.
Monitor Audio Bronze Series History
What size room are the Monitor Audio Bronze 2 and Monitor Audio Bronze 100 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 2 and Monitor Audio Bronze 100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 2 and Bronze 100 are 2-way speakers.
| Driver |
Monitor Audio Bronze 2 |
Monitor Audio Bronze 100 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 8-inch
|
Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz. On the other hand, the Bronze 100 features a 1" Hard-Dome Tweeter and 1 x 8" C-CAM Woofer with a Crossover frequency at 2200Hz.
Frequency Response
Bronze 2 has a frequency range of 42-30k Hz whereas Bronze 100 has a frequency range of 37-30k Hz. With a minimum frequency of 37Hz, the Bronze 100 can go significantly deeper on the low side and provide stronger bass compared to the Bronze 2's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 2 and Bronze 100 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 2 sensitivity is rated at 90 dB and the Bronze 100's is at 87 dB. This 3 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to Monitor Audio Bronze 100, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 2 and Bronze 100 has the same power range of 30-100 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Bronze 2 and Bronze 100 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Bronze 2 has a front firing port whereas Bronze 100 has a rear firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Monitor Audio Bronze 100 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 2's and Monitor Audio Bronze 100's external dimensions. Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) whereas Monitor Audio Bronze 100 has external dimensions of 376.0 x 231.0 x 325.0mm ( 14.8 x 9.0 x 12.7inch) .
Monitor Audio Bronze 100 is clearly the larger of the two speakers. Its body is 46mm wider, 26mm taller and 44mm deeper than Monitor Audio Bronze 2.
Below you can see the front view size comparison of Monitor Audio Bronze 2 and Monitor Audio Bronze 100 in scale.
Comparison image of Monitor Audio Bronze 2 and Monitor Audio Bronze 100 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2 and base area of the Monitor Audio Bronze 100 is approximately 750.8cm2 / 116.4inch2. The Bronze 2 requires 31% less surface area than the Bronze 100 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Monitor Audio Bronze 2 and Monitor Audio Bronze 100 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs and the Monitor Audio Bronze 100 weighs 7.80kg / 17.2lbs. This makes the Bronze 100 47% heavier than the Bronze 2.
Here is a comparison of how Bronze 2 and Bronze 100's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 2?
Here are the items that are included inside the box of Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of Monitor Audio Bronze 100?
Here are the items that come with the Bronze 100:
2 Bookshelf loudspeakers 2 Grilles 4 Terminal-jumpers (pre-installed) 2 Foam port plugs 8 Self-adhesive rubber feet Hex-key Quick Start Guide Important Safety Instructions
 Sensitivity |
90 dB
vs
87 dB
|
Play louder with same amount of amplification power |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Height |
350mm
vs
376mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
519cm2 (185x281mm)
vs
750cm2 (231x325mm)
|
Takes less floor space |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
37 Hz
vs
42 Hz
|
Generates deeper bass |
| General |
Monitor Audio Bronze 2 |
Monitor Audio Bronze 100 |
| Brand |
Monitor Audio |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
30-100 watts |
| Sensitivity |
90 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
4.5 ohms |
| Frequency Response |
42-30k Hz |
37-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
C-CAM |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3100Hz |
2200Hz |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
350.0mm (13.8") |
376.0mm (14.8") |
| Width |
185.0mm (7.3") |
231.0mm (9.1") |
| Depth |
281.0mm (11.1") |
325.0mm (12.8") |
| Weight |
5.30kg (11.7lbs) |
7.80kg (17.2lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, White, Rosemah, Black |
Walnut, Black, White, Urban Grey |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
30-31" |
22-26" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |