In this review, we will be comparing Bronze 2 and Bronze 50, two Passive Bookshelf speakers by Monitor Audio Let's have a brief look at the main features
of Monitor Audio Bronze 2 and Monitor Audio Bronze 50 first before getting into our more
detailed comparison.
Bronze 2 and Bronze 50 are members of Monitor Audio's Bronze series of speakers. Below you can find the loudspeakers from this series.
Monitor Audio Bronze Series History
What size room are the Monitor Audio Bronze 2 and Monitor Audio Bronze 50 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 2 and Monitor Audio Bronze 50 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 2 and Bronze 50 are 2-way speakers.
| Driver |
Monitor Audio Bronze 2 |
Monitor Audio Bronze 50 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6.5-inch
|
1 x 5.25-inch
|
Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz. On the other hand, the Bronze 50 features a 1" Hard-Dome Tweeter and 1 x 5.25" C-CAM Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Bronze 2 has a frequency range of 42-30k Hz whereas Bronze 50 has a frequency range of 40-30k Hz. With a minimum frequency of 40Hz, the Bronze 50 can go slightly deeper then the Bronze 2's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 2 and Bronze 50 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 2 sensitivity is rated at 90 dB and the Bronze 50's is at 85 dB. This 5 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to Monitor Audio Bronze 50, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 2 can handle a max power of 100 watts RMS from the amp the whereas Bronze 50 has a max power handling value of 80 watts RMS, 20 watts less than the Bronze 2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Bronze 2 and Bronze 50 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Bronze 2 has a front firing port whereas Bronze 50 has a rear firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Monitor Audio Bronze 50 with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 2's and Monitor Audio Bronze 50's external dimensions. Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) whereas Monitor Audio Bronze 50 has external dimensions of 281.0 x 166.0 x 265.0mm ( 11.0 x 6.5 x 10.4inch) .
Monitor Audio Bronze 2 is clearly the larger of the two speakers. Its body is 19mm wider, 69mm taller and 16mm deeper than Monitor Audio Bronze 50.
Below you can see the front view size comparison of Monitor Audio Bronze 2 and Monitor Audio Bronze 50 in scale.
Comparison image of Monitor Audio Bronze 2 and Monitor Audio Bronze 50 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2 and base area of the Monitor Audio Bronze 50 is approximately 439.9cm2 / 68.2inch2. The Bronze 2 requires 18% more surface area than the Bronze 50 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Monitor Audio Bronze 2 and Monitor Audio Bronze 50 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs and the Monitor Audio Bronze 50 weighs 5.00kg / 11lbs. This makes the Bronze 2 6% heavier than the Bronze 50.
Here is a comparison of how Bronze 2 and Bronze 50's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 2?
Here are the items that are included inside the box of Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of Monitor Audio Bronze 50?
Here are the items that come with the Bronze 50:
2 Bookshelf loudspeakers 2 Grilles 4 Terminal-jumpers (pre-installed) 2 Foam port plugs 8 Self-adhesive rubber feet Hex-key Quick Start Guide Important Safety Instructions
 Max Input Power |
100 watts
vs
80 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
85 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
| Low Frequency Response |
40 Hz
vs
42 Hz
|
Generates deeper bass |
 Height |
281mm
vs
350mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
439cm2 (166x265mm)
vs
519cm2 (185x281mm)
|
Takes less floor space |
| General |
Monitor Audio Bronze 2 |
Monitor Audio Bronze 50 |
| Brand |
Monitor Audio |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
20-80 watts |
| Sensitivity |
90 dB |
85 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
n/a |
4.4 ohms |
| Frequency Response |
42-30k Hz |
40-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
6.5" |
5.25" |
| Woofer Composition |
C-CAM |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
3100Hz |
2500Hz |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
350.0mm (13.8") |
281.0mm (11.1") |
| Width |
185.0mm (7.3") |
166.0mm (6.5") |
| Depth |
281.0mm (11.1") |
265.0mm (10.4") |
| Weight |
5.30kg (11.7lbs) |
5.00kg (11lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, White, Rosemah, Black |
Walnut, Black, White, Urban Grey |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
30-31" |
28-32" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |