In this review, we will be comparing Bronze 100 and Bronze 50, two Passive Bookshelf speakers by Monitor Audio Let's have a brief look at the main features
of Monitor Audio Bronze 100 and Monitor Audio Bronze 50 first before getting into our more
detailed comparison.
Bronze 100 and Bronze 50 are members of Monitor Audio's Bronze series of speakers. Below you can find the loudspeakers from this series.
Monitor Audio Bronze Series History
What size room are the Monitor Audio Bronze 100 and Monitor Audio Bronze 50 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 100 and Monitor Audio Bronze 50 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 100 and Bronze 50 are 2-way speakers.
| Driver |
Monitor Audio Bronze 100 |
Monitor Audio Bronze 50 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 8-inch
|
1 x 5.25-inch
|
Bronze 100 features a 1" Hard-Dome Tweeter and 1 x 8" C-CAM Woofer with a Crossover frequency at 2200Hz. On the other hand, the Bronze 50 features a 1" Hard-Dome Tweeter and 1 x 5.25" C-CAM Woofer with a Crossover frequency at 2500Hz.
Frequency Response
Bronze 100 has a frequency range of 37-30k Hz whereas Bronze 50 has a frequency range of 40-30k Hz. With a minimum frequency of 37Hz, the Bronze 100 can go slightly deeper then the Bronze 50's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 100 and Bronze 50 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 100 sensitivity is rated at 87 dB and the Bronze 50's is at 85 dB. This 2 dB difference makes the Monitor Audio Bronze 100 a more sensitive speaker compared to Monitor Audio Bronze 50, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 100 can handle a max power of 100 watts RMS from the amp the whereas Bronze 50 has a max power handling value of 80 watts RMS, 20 watts less than the Bronze 100.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Bronze 100 and Bronze 50 features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both Bronze 100 and Bronze 50 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 100's and Monitor Audio Bronze 50's external dimensions. Monitor Audio Bronze 100 has external dimensions of 376.0 x 231.0 x 325.0mm ( 14.8 x 9.0 x 12.7inch) whereas Monitor Audio Bronze 50 has external dimensions of 281.0 x 166.0 x 265.0mm ( 11.0 x 6.5 x 10.4inch) .
Monitor Audio Bronze 100 is clearly the larger of the two speakers. Its body is 65mm wider, 95mm taller and 60mm deeper than Monitor Audio Bronze 50.
Below you can see the front view size comparison of Monitor Audio Bronze 100 and Monitor Audio Bronze 50 in scale.
Comparison image of Monitor Audio Bronze 100 and Monitor Audio Bronze 50 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 100 is approximately 750.8cm2 / 116.4inch2 and base area of the Monitor Audio Bronze 50 is approximately 439.9cm2 / 68.2inch2. The Bronze 100 requires 71% more surface area than the Bronze 50 which gives it a small disadvantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Monitor Audio Bronze 100 and Monitor Audio Bronze 50 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 100 weighs 7.80kg / 17.2lbs and the Monitor Audio Bronze 50 weighs 5.00kg / 11lbs. This makes the Bronze 100 56% heavier than the Bronze 50.
Here is a comparison of how Bronze 100 and Bronze 50's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 100?
Here are the items that are included inside the box of Bronze 100:
2 Bookshelf loudspeakers 2 Grilles 4 Terminal-jumpers (pre-installed) 2 Foam port plugs 8 Self-adhesive rubber feet Hex-key Quick Start Guide Important Safety Instructions
What's in the Box of Monitor Audio Bronze 50?
Here are the items that come with the Bronze 50:
2 Bookshelf loudspeakers 2 Grilles 4 Terminal-jumpers (pre-installed) 2 Foam port plugs 8 Self-adhesive rubber feet Hex-key Quick Start Guide Important Safety Instructions
 Max Input Power |
100 watts
vs
80 watts
|
Handle more power from your amplifier |
 Sensitivity |
87 dB
vs
85 dB
|
Play louder with same amount of amplification power |
 Minimum Impedance |
4.5 ohms
vs
4.4 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Woofer Size |
8 inches
vs
5.25 inches
|
Larger woofer |
| Low Frequency Response |
37 Hz
vs
40 Hz
|
Generates deeper bass |
 Height |
281mm
vs
376mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
439cm2 (166x265mm)
vs
750cm2 (231x325mm)
|
Takes less floor space |
 Price per pair* |
550USD
vs
675USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Monitor Audio Bronze 100 |
Monitor Audio Bronze 50 |
| Brand |
Monitor Audio |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
30-100 watts |
20-80 watts |
| Sensitivity |
87 dB |
85 dB |
| Impedance |
8 ohms |
8 ohms |
| Impedance |
4.5 ohms |
4.4 ohms |
| Frequency Response |
37-30k Hz |
40-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
5.25" |
| Woofer Composition |
C-CAM |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome |
Hard-Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2200Hz |
2500Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
376.0mm (14.8") |
281.0mm (11.1") |
| Width |
231.0mm (9.1") |
166.0mm (6.5") |
| Depth |
325.0mm (12.8") |
265.0mm (10.4") |
| Weight |
7.80kg (17.2lbs) |
5.00kg (11lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black, White, Urban Grey |
Walnut, Black, White, Urban Grey |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
22-26" |
28-32" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |