In this review, we will be comparing Bronze 1 and Bronze 2, two Passive Bookshelf speakers by Monitor Audio Let's have a brief look at the main features
of Monitor Audio Bronze 1 and Monitor Audio Bronze 2 first before getting into our more
detailed comparison.
Bronze 1 and Bronze 2 are members of Monitor Audio's Bronze series of speakers. Below you can find the loudspeakers from this series.
Monitor Audio Bronze Series History
What size room are the Monitor Audio Bronze 1 and Monitor Audio Bronze 2 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Monitor Audio Bronze 1 and Monitor Audio Bronze 2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Bronze 1 and Bronze 2 are 2-way speakers.
| Driver |
Monitor Audio Bronze 1 |
Monitor Audio Bronze 2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.5-inch
|
1 x 6.5-inch
|
Bronze 1 features a 1" Dome Tweeter and 1 x 5.5" C-CAM Woofer with a Crossover frequency at 2700Hz. On the other hand, the Bronze 2 features a 1" Dome Tweeter and 1 x 6.5" C-CAM Woofer with a Crossover frequency at 3100Hz.
Frequency Response
Bronze 1 has a frequency range of 55-30k Hz whereas Bronze 2 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the Bronze 2 can go significantly deeper on the low side and provide stronger bass compared to the Bronze 1's min frequency of 55Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Bronze 1 and Bronze 2 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Bronze 1 sensitivity is rated at 88 dB and the Bronze 2's is at 90 dB. This 2 dB difference makes the Monitor Audio Bronze 2 a more sensitive speaker compared to Monitor Audio Bronze 1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Bronze 1 can handle a max power of 100 watts RMS from the amp the whereas Bronze 1 has a max power handling value of 70 watts RMS , 30 watts less than the Bronze 2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Bronze 2 features Post posts which make bi-amping or bi-wiring possible. Bronze 1 has a Post which doesn't feature bi-amping/bi-wiring.
Monitor Audio Bronze 1's Post terminals
Cabinet Type and Port Position
Bronze 1 has a rear firing port whereas Bronze 2 has a front firing ports. Monitor Audio Bronze 2's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Monitor Audio Bronze 1 with its rear-firing port.
Monitor Audio Bronze 1 Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Monitor Audio Bronze 1's and Monitor Audio Bronze 2's external dimensions. Monitor Audio Bronze 1 has external dimensions of 260.0 x 165.0 x 205.0mm ( 10.2 x 6.4 x 8.0inch) whereas Monitor Audio Bronze 2 has external dimensions of 350.0 x 185.0 x 281.0mm ( 13.7 x 7.2 x 11.0inch) .
Monitor Audio Bronze 2 is clearly the larger of the two speakers. Its body is 20mm wider, 90mm taller and 76mm deeper than Monitor Audio Bronze 1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Monitor Audio Bronze 1 is approximately 338.3cm2 / 52.4inch2 and base area of the Monitor Audio Bronze 2 is approximately 519.9cm2 / 80.6inch2. The Bronze 1 requires 35% less surface area than the Bronze 2 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Monitor Audio Bronze 1 weighs 3.50kg / 7.7lbs and the Monitor Audio Bronze 2 weighs 5.30kg / 11.7lbs. This makes the Bronze 2 51% heavier than the Bronze 1.
Here is a comparison of how Bronze 1 and Bronze 2's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Monitor Audio Bronze 1?
Here are the items that are included inside the box of Bronze 1:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
What's in the Box of Monitor Audio Bronze 2?
Here are the items that come with the Bronze 2:
2 Bookshelf loudspeakers 2 Grilles 2 Foam port plugs Hex-key Owner's Manual Important Safety Instructions
 Height |
260mm
vs
350mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
338cm2 (165x205mm)
vs
519cm2 (185x281mm)
|
Takes less floor space |
 Max Input Power |
100 watts
vs
70 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.5 inches
|
Larger woofer |
| Low Frequency Response |
42 Hz
vs
55 Hz
|
Generates deeper bass |
 Bi-Amping and Bi-Wiring |
Yes
vs
No
|
Allows bi-amping and bi-wiring connections |
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
| General |
Monitor Audio Bronze 1 |
Monitor Audio Bronze 2 |
| Brand |
Monitor Audio |
Monitor Audio |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
20-70 watts |
30-100 watts |
| Sensitivity |
88 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
55-30k Hz |
42-30k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.5" |
6.5" |
| Woofer Composition |
C-CAM |
C-CAM |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Dome |
Dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2700Hz |
3100Hz |
| Firing Direction |
rear |
front |
Physical Specs |
|
|
| Height |
260.0mm (10.2") |
350.0mm (13.8") |
| Width |
165.0mm (6.5") |
185.0mm (7.3") |
| Depth |
205.0mm (8.1") |
281.0mm (11.1") |
| Weight |
3.50kg (7.7lbs) |
5.30kg (11.7lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, White, Rosemah, Black |
Walnut, White, Rosemah, Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
30-31" |
30-31" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |