In this review, we will be comparing Motion XT F200 and Motion XT F100, two Passive Floor-standing speakers by MartinLogan Let's have a brief look at the main features
of MartinLogan Motion XT F200 and MartinLogan Motion XT F100 first before getting into our more
detailed comparison.
Motion XT F200 and Motion XT F100 are members of MartinLogan's Motion XT series of speakers. Below you can find the loudspeakers from this series.
MartinLogan Motion XT Series History
What size room are the MartinLogan Motion XT F200 and MartinLogan Motion XT F100 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan Motion XT F200 and MartinLogan Motion XT F100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Motion XT F200 and Motion XT F100 are 3-way speakers.
| Driver |
MartinLogan Motion XT F200 |
MartinLogan Motion XT F100 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.25 x 2.4-inch
|
1.25 x 2.4-inch
|
|
Midrange
|
1 x 6.5-inch |
1 x 6.5-inch |
|
Woofer
|
3 x 8-inch
|
3 x 6.5-inch
|
Motion XT F200 features a 1.25 x 2.4" Folded Motion XT Tweeter , a 6.5" Midrange and 3 x 8" Aluminum Woofer with a Crossover frequency at 300Hz and 2600Hz. On the other hand, the Motion XT F100 features a 1.25 x 2.4" Folded Motion XT Tweeter , a 6.5" Midrange and 3 x 6.5" Aluminum Woofer with a Crossover frequency at 280Hz and 2600Hz.
Frequency Response
Motion XT F200 has a frequency range of 27-25k Hz whereas Motion XT F100 has a frequency range of 31-25k Hz. With a minimum frequency of 27Hz, the Motion XT F200 can go slightly deeper then the Motion XT F100's min frequency of 31Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
MartinLogan Motion XT F200
MartinLogan Motion XT F100
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion XT F200 and Motion XT F100 have the same Impedance of 4 ohms and their sensitivity is also same at 92 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Motion XT F200 and the Motion XT F200 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Motion XT F200 can handle a max power of 600 watts RMS from the amp the whereas Motion XT F100 has a max power handling value of 450 watts RMS, 150 watts less than the Motion XT F200.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Motion XT F200 and Motion XT F100 features dual binding post speaker terminals for bi-amping or bi-wiring.
MartinLogan Motion XT F200's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
MartinLogan Motion XT F100's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Motion XT F200 and Motion XT F100 have bottom firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan Motion XT F200's and MartinLogan Motion XT F100's external dimensions. MartinLogan Motion XT F200 has external dimensions of 1289 x 349 x 419mm ( 50-3/4inch x 13-3/4inch x 16-1/2inch ) whereas MartinLogan Motion XT F100 has external dimensions of 1213 x 318 x 381mm ( 47-3/4inch x 12-1/2inch x 15inch ) .
MartinLogan Motion XT F200 is clearly the larger of the two speakers. Its body is 31mm wider, 76mm taller and 38mm deeper than MartinLogan Motion XT F100.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan Motion XT F200 is approximately 1462.3cm2 / 226.7inch2 and base area of the MartinLogan Motion XT F100 is approximately 1211.6cm2 / 187.8inch2. The Motion XT F200 requires 21% more surface area than the Motion XT F100 which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan Motion XT F200 weighs 39.00kg / 85.8lbs and the MartinLogan Motion XT F100 weighs 34.50kg / 75.9lbs. This makes the Motion XT F200 13% heavier than the Motion XT F100.
Here is a comparison of how Motion XT F200 and Motion XT F100's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
MartinLogan Motion XT F200
MartinLogan Motion XT F100
 Max Input Power |
600 watts
vs
450 watts
|
Handle more power from your amplifier |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
27 Hz
vs
31 Hz
|
Generates deeper bass |
 Height |
1213mm
vs
1289mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
1211cm2 (318x381mm)
vs
1462cm2 (349x419mm)
|
Takes less floor space |
 Price per pair* |
4498USD
vs
5498USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MartinLogan Motion® XT F200 |
MartinLogan Motion® XT F100 |
| Brand |
MartinLogan |
MartinLogan |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-600 watts |
20-450 watts |
| Sensitivity |
92 dB |
92 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
27-25k Hz |
31-25k Hz |
Drivers |
|
|
| Woofer Quantity |
3 |
3 |
| Woofer Size |
8" |
6.5" |
| Woofer Composition |
Aluminum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.25 x 2.4" |
1.25 x 2.4" |
| Tweeter Type |
Folded Motion XT |
Folded Motion XT |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
6.5" |
| Crossover Frequency |
300Hz and 2600Hz |
280Hz and 2600Hz |
| Firing Direction |
bottom |
bottom |
| Suggested Break-in Period |
Allow 72 hours of break-in |
Allow 72 hours of break-in |
Physical Specs |
|
|
| Height |
1289.0mm (50.7") |
1213.0mm (47.8") |
| Width |
349.0mm (13.7") |
318.0mm (12.5") |
| Depth |
419.0mm (16.5") |
381.0mm (15") |
| Weight |
39.00kg (85.8lbs) |
34.50kg (75.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood veneer |
MDF/Wood veneer |
| Available Colors |
Gloss Black, Walnut, and Satin White |
Gloss Black, Walnut, and Satin White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |