In this review, we will be comparing RP-600C and RP-404C, two Passive Center Channel speakers by Klipsch.
Let's have a brief look at the main features
of Klipsch RP-600C and Klipsch RP-404C first before getting into our more
detailed comparison.
| Key Specs | Klipsch RP-600C | Klipsch RP-404C |
|---|
| Brand | Klipsch
United States · founded 1946 | Klipsch
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Tractrix horn dome | 1" Tractrix horn |
|---|
| Woofer | 2 x 6.5" Cerametallic cone | 4 x 4" Cerametallic cone |
|---|
| Frequency response | 58-25k Hz | 59-25k Hz |
|---|
| Sensitivity | 97 dB | 97 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | up to 125 watts | up to 125 watts |
|---|
| Weight | 10.91kg / 24lbs | 12.73kg / 28lbs |
|---|
| Dimensions (H x W x D) | 8" x 21-15/16" x 12-1/8"
204.0 x 558.0 x 308.0mm | 5-3/4" x 26-1/16" x 13-7/16"
147.0 x 662.0 x 342.0mm |
|---|
RP-600C and RP-404C are members of Klipsch's Reference Premiere (RP) series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) Series
History
What size room are the Klipsch RP-600C and Klipsch RP-404C speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-600C |
Klipsch RP-404C |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-600C and RP-404C are 2-way speakers.
Klipsch RP-600CKlipsch RP-404C
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Klipsch RP-600C |
Klipsch RP-404C |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
4 x 4-inch
|
RP-600C features a 1" titanium Tractrix horn dome Tweeter and 2 x 6.5" Cerametallic cone Woofer. On the other hand, the RP-404C features a 1" titanium Tractrix horn Tweeter and 4 x 4" Cerametallic cone Woofer.
Frequency Response
RP-600C has a frequency range of 58-25k Hz whereas RP-404C has a frequency range of 59-25k Hz. With a minimum frequency of 58Hz, the RP-600C can go slightly deeper then the RP-404C's min frequency of 59Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-600C and RP-404C have the same Impedance of 8 ohms and their sensitivity is also same at 97 dB.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
RP-600C and RP-404C have the same power range of up to 125 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
RP-600C features Binding post type posts and RP-404C has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch RP-600C's Binding post terminals
Klipsch RP-404C's Binding post terminals
Cabinet Type and Port Position
Both RP-600C and RP-404C have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-600C's and Klipsch RP-404C's external dimensions. Klipsch RP-600C has external dimensions of 204.0 x 558.0 x 308.0mm (8 x 21-15/16 x 12-1/8inch) whereas Klipsch RP-404C has external dimensions of 147.0 x 662.0 x 342.0mm (5-3/4 x 26-1/16 x 13-7/16inch).
Klipsch RP-600C is 104mm narrower and 34mm less deeper than Klipsch RP-404C but it is also 57mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-600C is approximately 1718.6cm2 / 266.4inch2 and base area of the Klipsch RP-404C is approximately 2264.0cm2 / 350.9inch2. The RP-600C requires 24% less surface area than the RP-404C which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-600C weighs 10.91kg / 24lbs and the Klipsch RP-404C weighs 12.73kg / 28lbs. This makes the RP-404C 17% heavier than the RP-600C.
Here is a comparison of how RP-600C and RP-404C's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of Klipsch RP-600C?
Here are the items that are included inside the box of RP-600C:
- Center channel loudspeaker
- Grille (installed)
- 4 Self-adhesive rubber feet
- Plastic tipped bolt (w/ attached nut)
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of Klipsch RP-404C?
Here are the items that come with the RP-404C:
- Center channel loudspeaker
- Grille (installed)
- 4 Self-adhesive rubber feet
- User Manual
- Important Safety Instructions
- Warranty Information
 Woofer Size |
6.5 inches
vs
4 inches
|
Larger woofer |
|
Low Frequency Response |
58 Hz
vs
59 Hz
|
Generates deeper bass |
 Base Surface Area |
1718cm2
vs
2264cm2
|
Takes less floor space |
|
Number of Woofers |
4
vs
2
|
More woofers |
 Height |
147mm
vs
204mm
|
Easier to fit in smaller spaces |
 Price per pair* |
329USD
vs
499USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-600C |
Klipsch Reference Premiere RP-404C |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
up to 125 watts |
up to 125 watts |
| Sensitivity |
97 dB |
97 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
58-25k Hz |
59-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
4 |
| Woofer Size |
6.5" |
4" |
| Woofer Composition |
Cerametallic cone |
Cerametallic cone |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix horn dome |
Tractrix horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
204.0mm (8") |
147.0mm (5.8") |
| Width |
558.0mm (22") |
662.0mm (26.1") |
| Depth |
308.0mm (12.1") |
342.0mm (13.5") |
| Weight |
10.91kg (24lbs) |
12.73kg (28lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
Siblings in Klipsch's Reference Premiere (RP) series, so they share a family sound. It comes down to size, output and price.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (58Hz vs 59Hz). |
| Amplifier needs | evenly matched | Similar sensitivity (97dB vs 97dB) - both want much the same power. |
| Headroom | evenly matched | Similar power handling (125W vs 125W). |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Price | B | Klipsch RP-404C is cheaper - $329 against $499, about 34% less. |
A Klipsch RP-600C B Klipsch RP-404C
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Neither runs away with it - they trade advantages. Let the "depends" rows and your own room settle it. Think about the whole system, not just the speakers: the roughly $170 saved by taking the cheaper pair would buy a subwoofer or a better amplifier, and either usually does more for the sound than the difference between these two.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.