In this review, we will be comparing two different type of speakers by Klipsch. Klipsch Reference Premiere RP-6000F is a Floor-standing speaker whereas the RP-500M is a Bookshelf speaker.
Let's have a brief look at the main features
of Klipsch RP-6000F and Klipsch RP-500M first before getting into our more
detailed comparison.
Klipsch RP-6000F Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 2 x 6.5" Cerametallic Woofer
- 34-25k Hz Frequency Response
- 97 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 125watts
- Weight:22.27kg
- Dimensions (H x W x D): 1010.0" x 9-5/16" x 17"( 1010.0 x 237.0 x 432.0mm )
Klipsch RP-500M Key Specs
- 2-way Design
- 1" Tractrix Horn Tweeter
- 5.25" Cerametallic Woofer
- 48-25k Hz Frequency Response
- 93 dB Sensitivity
- Impedance: 8ohms
- Power Range:up to 75watts
- Weight:5.40kg
- Dimensions (H x W x D): 343.0" x 6.8" x 9.4"( 343.0 x 173.0 x 241.0mm )
RP-6000F and RP-500M are members of Klipsch's Reference Premiere (RP) series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference Premiere (RP) Series History
What size room are the Klipsch RP-6000F and Klipsch RP-500M speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Klipsch RP-6000F |
Klipsch RP-500M |
| Near-field |
Bad |
Good |
| Small Room |
Poor |
Good |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Poor |
No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Klipsch RP-6000F and Klipsch RP-500M compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both RP-6000F and RP-500M are 2-way speakers.
| Driver |
Klipsch RP-6000F |
Klipsch RP-500M |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
1 x 5.25-inch
|
RP-6000F features a 1" Tractrix Horn Tweeter and 2 x 6.5" Cerametallic Woofer . On the other hand, the RP-500M features a 1" Tractrix Horn Tweeter and 1 x 5.25" Cerametallic Woofer with a Crossover frequency at 1500Hz.
Frequency Response
RP-6000F has a frequency range of 34-25k Hz whereas RP-500M has a frequency range of 48-25k Hz. With a minimum frequency of 34Hz, the RP-6000F can go significantly deeper on the low side and provide stronger bass compared to the RP-500M's min frequency of 48Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-6000F and RP-500M have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-6000F sensitivity is rated at 97 dB and the RP-500M's is at 93 dB. This 4 dB difference makes the Klipsch RP-6000F a more sensitive speaker compared to Klipsch RP-500M, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
RP-6000F can handle a max power of 125 watts RMS from the amp the whereas RP-500M has a max power handling value of 75 watts RMS, 50 watts less than the RP-6000F.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
RP-6000F features Post posts which make bi-amping or bi-wiring possible. RP-500M has a Single binding posts which doesn't feature bi-amping/bi-wiring.
Klipsch RP-6000F's Post terminals allows Bi-amping or bi-wiring
Klipsch RP-500M's Single binding posts terminals
Cabinet Type and Port Position
Both RP-6000F and RP-500M have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-6000F's and Klipsch RP-500M's external dimensions. Klipsch RP-6000F has external dimensions of 1010.0 x 237.0 x 432.0mm ( 39-3/4 x 9-5/16 x 17inch) whereas Klipsch RP-500M has external dimensions of 343.0 x 173.0 x 241.0mm ( 13.5 x 6.8 x 9.4inch) .
Klipsch RP-6000F is clearly the larger of the two speakers. Its body is 64mm wider, 667mm taller and 191mm deeper than Klipsch RP-500M.
Below you can see the front view size comparison of Klipsch RP-6000F and Klipsch RP-500M in scale.
Comparison image of Klipsch RP-6000F and Klipsch RP-500M Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-6000F is approximately 1023.8cm2 / 158.7inch2 and base area of the Klipsch RP-500M is approximately 416.9cm2 / 64.6inch2. The RP-6000F requires 146% more surface area than the RP-500M which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Klipsch RP-6000F?
Here are the items that are included inside the box of RP-6000F:
Floorstanding loudspeakerStabilizer feet (installed)Grille (installed)2 Terminal jumpers (installed)User ManualImportant Safety InstructionsWarranty Information
What's in the Box of Klipsch RP-500M?
Here are the items that come with the RP-500M:
2 Bookshelf loudspeakers 2 Grilles (installed) 8 Self-adhesive rubber feet User Manual Important Safety Instructions Warranty Information
Max Input Power 
Sensitivity 
Woofer Size 
Bi-Amping and Bi-Wiring 
Mounting Bracket 
Height 
Base Surface Area 
Price per pair*