In this review, we will be comparing two different type of speakers by KEF. KEF Q6 Meta is a Center Channel speaker whereas the Q11 Meta is a Floor-standing speaker.
Let's have a brief look at the main features
of KEF Q6 Meta and KEF Q11 Meta first before getting into our more
detailed comparison.
KEF Q6 Meta Key Specs
- 3-way Design
- 12th Generation Uni-Q Driver
- 0.75" Hard-dome Tweeter
- 4" Midrange
- 2 x 6.5" Aluminum Woofer
- 63-20k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 200watts
- Weight:14.14kg
- Dimensions (H x W x D): 210.0" x 24.8" x 11.9"( 210 x 629 x 303 mm )
KEF Q11 Meta Key Specs
- 3-way Design
- 12th Generation Uni-Q Driver
- 0.75" Hard dome Tweeter
- 4" Midrange
- 3 x 6.5" Aluminum Woofer
- 4" Midrange
- 44-20k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 225watts
- Weight:22.55kg
- Dimensions (H x W x D): 1112.0" x 12.5" x 15"( 1112 x 317 x 380 mm )
Q6 Meta and Q11 Meta are members of KEF's Q Meta series of speakers. Below you can find the loudspeakers from this series.
KEF Q Meta Series History
What size room are the KEF Q6 Meta and KEF Q11 Meta speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
KEF Q6 Meta |
KEF Q11 Meta |
| Near-field |
Poor |
Are you nuts? |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Good |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the KEF Q6 Meta and KEF Q11 Meta compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q6 Meta and Q11 Meta are 3-way speakers.
| Driver |
KEF Q6 Meta |
KEF Q11 Meta |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
0.75-inch
|
0.75-inch
|
|
Midrange
|
1 x 4-inch |
1 x 4-inch |
|
Woofer
|
2 x 6.5-inch
|
3 x 6.5-inch
|
Q6 Meta features a 0.75" vented aluminum dome with MAT absorber Hard-dome Tweeter , a 4" Midrange and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 560 Hz, 2.7 kHz. On the other hand, the Q11 Meta features a 0.75" vented aluminum dome with MAT absorber Hard dome Tweeter , a 4" Midrange and 3 x 6.5" Aluminum Woofer with a Crossover frequency at 480 Hz, 2.7 kHz.
Frequency Response
Q6 Meta has a frequency range of 63-20k Hz whereas Q11 Meta has a frequency range of 44-20k Hz. With a minimum frequency of 44Hz, the Q11 Meta can go significantly deeper on the low side and provide stronger bass compared to the Q6 Meta's min frequency of 63Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q6 Meta and Q11 Meta have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Q6 Meta sensitivity is rated at 86 dB and the Q11 Meta's is at 89 dB. This 3 dB difference makes the KEF Q11 Meta a more sensitive speaker compared to KEF Q6 Meta, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Q6 Meta and the Q6 Meta can provide this impedance level.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q6 Meta can handle a max power of 225 watts RMS from the amp the whereas Q6 Meta has a max power handling value of 200 watts RMS , 25 watts less than the Q11 Meta.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q6 Meta features Binding Post type posts and Q11 Meta has a Binding Post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare KEF Q6 Meta's and KEF Q11 Meta's external dimensions. KEF Q6 Meta has external dimensions of 210 x 629 x 303 mm ( 8.3 x 24.8 x 11.9 in.) whereas KEF Q11 Meta has external dimensions of 1112 x 317 x 380 mm ( 43.8 x 12.5 x 15.0 in.) .
KEF Q6 Meta is 902mm shorter and 77mm less deeper than KEF Q11 Meta but it is also 312mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the KEF Q6 Meta is approximately 1905.9cm2 / 295.4inch2 and base area of the KEF Q11 Meta is approximately 1204.6cm2 / 186.7inch2. The Q6 Meta requires 58% more surface area than the Q11 Meta which gives it a small disadvantage on placement in tight spaces.
What's in the Box of KEF Q6 Meta?
Here are the items that are included inside the box of Q6 Meta:
Q6 Meta Magnetic grilles (pair) Rubber feet Port bungs User manual and warranty information
What's in the Box of KEF Q11 Meta?
Here are the items that come with the Q11 Meta:
Q11 Meta Magnetic grilles Plinth and rubber feet Port bungs User manual and warranty information
Height 
Price per pair* 
Max Input Power 
Sensitivity 
Number of Woofers 
Base Surface Area