In this review, we will be comparing Triton Two+ and Triton Seven, two Passive Floor-standing speakers by GoldenEar. Let's have a brief look at the main features of GoldenEar Triton Two+ and GoldenEar Triton Seven first before getting into our more detailed comparison.
In the following sections, we will get into details in order to better understand how GoldenEar Triton Two+ and GoldenEar Triton Seven compares and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
One of the fundamental differences between these two speakers is that Triton Two+ is a 3-way design whereas Triton Seven is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker. Triton Two+ features a " High-Velocity Folded Ribbon Tweeter , a 4.5" Midrange and 1 x 5" Polymer Woofer . On the other hand, Triton Seven features a " Folded Ribbon Tweeter and 2 x 5.25" Polypropylene Woofer .
Triton Two+ has a frequency range of 16-35k Hz whereas Triton Seven has a frequency range of 29-35k Hz. With a minimum frequency of 16Hz, the Triton Two+ can go significantly deeper on the low side and provide stronger bass compared to the Triton Seven's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers under Floor-standing class in our database.
Impedance and Sensitivity
Triton Two+ and Triton Seven has the same Impedance of 8 ohms but where they differ is the sensitivity levels. Triton Two+ sensitivity is rated at 91 dB and Triton Seven's is at 89 dB. This 2 dB difference makes GoldenEar Triton Two+ a more sensitive speaker compared to GoldenEar Triton Seven, hence will play louder with the same amount of watts.
is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Triton Two+ can handle a max power of 500 watts RMS from the amp the whereas Triton Seven has a max power handling value of 300 watts RMS, 200 watts less than the Triton Two+.
Keep in mind that higher max power handling value doesn't necesssarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impededance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Triton Two+ features 5-way Post type posts and Triton Seven has a 5-way Post type posts. None of these speakers feature bi-amping/bi-wiring.
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare GoldenEar Triton Two+'s and GoldenEar Triton Seven's external dimensions. GoldenEar Triton Two+ has external dimensions of 1232.0 x 297.0 x 486.0mm ( 48-1/2 x 11-11/16 x 19-1/8inch) whereas GoldenEar Triton Seven has external dimensions of 1029.0 x 267.0 x 369.0mm ( 40-1/2 x 10-1/2 x 14-1/2inch) .
GoldenEar Triton Two+ is clearly the larger of the two speakers. Its body is 30mm wider, 203mm taller and 117mm deeper than GoldenEar Triton Seven.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the GoldenEar Triton Two+ is approximately 1443.4cm2 / 223.7inch2 and base area of the GoldenEar Triton Seven is approximately 985.2cm2 / 152.7inch2. The Triton Two+ requires 47% more surface area than the Triton Seven which gives it a small disadvantage on placement in tight spaces.