In this review, we will be comparing Triton Seven and Triton Three+, two Passive Floor-standing speakers by GoldenEar Let's have a brief look at the main features
of GoldenEar Triton Seven and GoldenEar Triton Three+ first before getting into our more
detailed comparison.
Triton Seven and Triton Three+ are members of GoldenEar's Triton series of speakers. Below you can find the loudspeakers from this series.
GoldenEar Triton Series History
What size room are the GoldenEar Triton Seven and GoldenEar Triton Three+ speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the GoldenEar Triton Seven and GoldenEar Triton Three+ compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Triton Seven is a 2-way design whereas the Triton Three+ is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
GoldenEar Triton Seven |
GoldenEar Triton Three+ |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
-inch
|
-inch
|
|
Midrange
|
- |
1 x 4.5-inch |
|
Woofer
|
2 x 5.25-inch
|
1 x 5-inch
|
Triton Seven features a " Folded Ribbon Tweeter and 2 x 5.25" Polypropylene Woofer . On the other hand, the Triton Three+ features a " High-Velocity Folded Ribbon Tweeter , a 4.5" Midrange and 1 x 5" Polymer Woofer .
Frequency Response
Triton Seven has a frequency range of 29-35k Hz whereas Triton Three+ has a frequency range of 21-35k Hz. With a minimum frequency of 21Hz, the Triton Three+ can go significantly deeper on the low side and provide stronger bass compared to the Triton Seven's min frequency of 29Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Triton Seven and Triton Three+ have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Triton Seven sensitivity is rated at 89 dB and the Triton Three+'s is at 90 dB. This 1 dB difference makes the GoldenEar Triton Three+ a more sensitive speaker compared to GoldenEar Triton Seven, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Triton Seven can handle a max power of 400 watts RMS from the amp the whereas Triton Seven has a max power handling value of 300 watts RMS , 100 watts less than the Triton Three+.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Triton Seven features 5-Way post type posts and Triton Three+ has a 5-Way post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare GoldenEar Triton Seven's and GoldenEar Triton Three+'s external dimensions. GoldenEar Triton Seven has external dimensions of 1029.0 x 267.0 x 369.0mm ( 40-1/2 x 10-1/2 x 14-1/2inch) whereas GoldenEar Triton Three+ has external dimensions of 1131.0 x 296.0 x 447.0mm ( 44-1/2 x 11-5/8 x 17-9/16inch) .
GoldenEar Triton Three+ is clearly the larger of the two speakers. Its body is 29mm wider, 102mm taller and 78mm deeper than GoldenEar Triton Seven.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the GoldenEar Triton Seven is approximately 985.2cm2 / 152.7inch2 and base area of the GoldenEar Triton Three+ is approximately 1323.1cm2 / 205.1inch2. The Triton Seven requires 26% less surface area than the Triton Three+ which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The GoldenEar Triton Seven weighs 14.55kg / 32lbs and the GoldenEar Triton Three+ weighs 20.45kg / 45lbs. This makes the Triton Three+ 41% heavier than the Triton Seven.
Here is a comparison of how Triton Seven and Triton Three+'s weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of GoldenEar Triton Seven?
Here are the items that are included inside the box of Triton Seven:
Floorstanding loudspeaker4 Rubber feet (pre-installed)4 Spikes4 Locking nutsOwners Manual
What's in the Box of GoldenEar Triton Three+?
Here are the items that come with the Triton Three+:
Floorstanding loudspeaker9-feet AC power cordBase4 Rubber feet (pre-installed on base)4 Spikes4 Locking nuts4 Screws4 WashersOwners Manual
 Woofer Size |
5.25 inches
vs
5 inches
|
Larger woofer |
| Number of Woofers |
2
vs
1
|
More woofers |
 Height |
1029mm
vs
1131mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
985cm2 (267x369mm)
vs
1323cm2 (296x447mm)
|
Takes less floor space |
 Price per pair* |
1798USD
vs
2998USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
400 watts
vs
300 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
| Low Frequency Response |
21 Hz
vs
29 Hz
|
Generates deeper bass |
| General |
GoldenEar Triton Seven |
GoldenEar Triton Three+ |
| Brand |
GoldenEar |
GoldenEar |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
10-300 watts |
20-400 watts |
| Sensitivity |
89 dB |
90 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
29-35k Hz |
21-35k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
5.25" |
5" |
| Woofer Composition |
Polypropylene |
Polymer |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
- |
- |
| Tweeter Type |
Folded Ribbon |
High-Velocity Folded Ribbon |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
4.5" |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1029.0mm (40.5") |
1131.0mm (44.5") |
| Width |
267.0mm (10.5") |
296.0mm (11.7") |
| Depth |
369.0mm (14.5") |
447.0mm (17.6") |
| Weight |
14.55kg (32lbs) |
20.45kg (45lbs) |
| Enclosure |
Passive Radiator |
Passive Radiator |
| Finish |
MDF/Lacquer |
MDF/Lacquer |
| Available Colors |
Gloss Black |
Gloss Black |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |