In this review, we will be comparing two different type of speakers by Focal. Focal Vestia No1 is a Bookshelf speaker whereas the Vestia No3 is a Floor-standing speaker.
Let's have a brief look at the main features
of Focal Vestia No1 and Focal Vestia No3 first before getting into our more
detailed comparison.
Vestia No1 and Vestia No3 are members of Focal's Vestia series of speakers. Below you can find the loudspeakers from this series.
Focal Vestia Series History
What size room are the Focal Vestia No1 and Focal Vestia No3 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Focal Vestia No1 and Focal Vestia No3 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Vestia No1 is a 2-way design whereas the Vestia No3 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Focal Vestia No1 |
Focal Vestia No3 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
1 x 6.5-inch
|
3 x 6.5-inch
|
Vestia No1 features a 1" Al/Mg inverted dome Tweeter and 1 x 6.5" Slatefiber Woofer with a Crossover frequency at 2800Hz. On the other hand, the Vestia No3 features a 1" Al/Mg inverted dome Tweeter , a 6.5" Midrange and 3 x 6.5" Slatefiber Woofer with a Crossover frequency at 280Hz and 3100Hz.
Frequency Response
Vestia No1 has a frequency range of 56-30k Hz whereas Vestia No3 has a frequency range of 42-30k Hz. With a minimum frequency of 42Hz, the Vestia No3 can go significantly deeper on the low side and provide stronger bass compared to the Vestia No1's min frequency of 56Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Vestia No1 and Vestia No3 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. Vestia No1 sensitivity is rated at 89.5 dB and the Vestia No3's is at 92 dB. This 2 dB difference makes the Focal Vestia No3 a more sensitive speaker compared to Focal Vestia No1, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Vestia No1 can handle a max power of 300 watts RMS from the amp the whereas Vestia No1 has a max power handling value of 120 watts RMS , 180 watts less than the Vestia No3.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both Vestia No1 and Vestia No3 have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Focal Vestia No1's and Focal Vestia No3's external dimensions. Focal Vestia No1 has external dimensions of 388.0 x 220.0 x 261.0mm ( 15-1/4-inch x 8-5/8-inch x 10-1/4-inch) whereas Focal Vestia No3 has external dimensions of 1121.0 x 258.0 x 375.0mm ( 44-1/8-inch x 10-1/8-inch x 14-3/4-inch) .
Focal Vestia No3 is clearly the larger of the two speakers. Its body is 38mm wider, 733mm taller and 114mm deeper than Focal Vestia No1.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Focal Vestia No1 is approximately 574.2cm2 / 89.0inch2 and base area of the Focal Vestia No3 is approximately 967.5cm2 / 150.0inch2. The Vestia No1 requires 41% less surface area than the Vestia No3 which gives it a small advantage on placement in tight spaces.