In this review, we will be comparing Airmotiv XT2 and Airmotiv XT1, two Passive Floor-standing speakers by Emotiva
Let's have a brief look at the main features
of Emotiva Airmotiv XT2 and Emotiva Airmotiv XT1 first before getting into our more
detailed comparison.
Emotiva Airmotiv XT2 Key Specs
- 3-way Design
- 25×32 mm" folded ribbon Tweeter
- 5.25" Midrange
- 3 x 6" woven fiber cone Woofer
- 40 Hz – 27 kHz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 250watts
- Weight:22.20kg
- Dimensions (H x W x D): 1137.0" x 10.25" x 12.25"( 1137 x 216 x 311 mm )
Emotiva Airmotiv XT1 Key Specs
- 3-way Design
- 25×32 mm" folded ribbon Tweeter
- 4.5" Midrange
- 3 x 5.25" woven fiber cone Woofer
- 4.5" Midrange
- 45 Hz – 27 kHz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:Up to 200watts
- Weight:15.90kg
- Dimensions (H x W x D): 1060.0" x 8.75" x 10"( 106 x 178 x 254 mm )
Airmotiv XT2 and Airmotiv XT1 are members of Emotiva's Airmotiv X series of speakers. Below you can find the loudspeakers from this series.
Emotiva Airmotiv X Series
History
What size room are the Emotiva Airmotiv XT2 and Emotiva Airmotiv XT1 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Emotiva Airmotiv XT2 |
Emotiva Airmotiv XT1 |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Emotiva Airmotiv XT2 and Emotiva Airmotiv XT1 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Airmotiv XT2 and Airmotiv XT1 are 3-way speakers.
| Driver |
Emotiva Airmotiv XT2 |
Emotiva Airmotiv XT1 |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
25×32 mm-inch
|
25×32 mm-inch
|
|
Midrange
|
1 x 5.25-inch |
1 x 4.5-inch |
|
Woofer
|
3 x 6-inch
|
3 x 5.25-inch
|
Airmotiv XT2 features a 25×32 mm" folded ribbon Tweeter , a 5.25" Midrange and 3 x 6" woven fiber cone Woofer with a Crossover frequency at 430 Hz, 3.1 kHz. On the other hand, the Airmotiv XT1 features a 25×32 mm" folded ribbon Tweeter , a 4.5" Midrange and 3 x 5.25" woven fiber cone Woofer with a Crossover frequency at 410 Hz, 3.1 kHz.
Frequency Response
Airmotiv XT2 has a frequency range of 40 Hz – 27 kHz whereas Airmotiv XT1 has a frequency range of 45 Hz – 27 kHz. With a minimum frequency of 40Hz, the Airmotiv XT2 can go significantly deeper on the low side and provide stronger bass compared to the Airmotiv XT1's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Airmotiv XT2 and Airmotiv XT1 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Airmotiv XT2 sensitivity is rated at 90 dB and the Airmotiv XT1's is at 89 dB. This 1 dB difference makes the Emotiva Airmotiv XT2 a more sensitive speaker compared to Emotiva Airmotiv XT1, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Airmotiv XT2 and the Airmotiv XT2 can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Airmotiv XT2 can handle a max power of 250 watts RMS from the amp the whereas Airmotiv XT1 has a max power handling value of 200 watts RMS, 50 watts less than the Airmotiv XT2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Airmotiv XT2 and Airmotiv XT1 features dual binding post speaker terminals for bi-amping or bi-wiring.
Emotiva Airmotiv XT2's Binding post terminals allows Bi-amping or bi-wiring
Emotiva Airmotiv XT1's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Airmotiv XT2 and Airmotiv XT1 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Emotiva Airmotiv XT2's and Emotiva Airmotiv XT1's external dimensions. Emotiva Airmotiv XT2 has external dimensions of 1137 x 216 x 311 mm ( 44.75” x 8.5” x 12.25”) whereas Emotiva Airmotiv XT1 has external dimensions of 106 x 178 x 254 mm ( 41.75” x 7” x 10”) .
Emotiva Airmotiv XT2 is clearly the larger of the two speakers. Its body is 36mm wider, 77mm taller and 57mm deeper than Emotiva Airmotiv XT1.
Below you can see the front view size comparison of Emotiva Airmotiv XT2 and Emotiva Airmotiv XT1 in scale.
Comparison image of Emotiva Airmotiv XT2 and Emotiva Airmotiv XT1 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Emotiva Airmotiv XT2 is approximately 671.8cm2 / 104.1inch2 and base area of the Emotiva Airmotiv XT1 is approximately 452.1cm2 / 70.1inch2. The Airmotiv XT2 requires 49% more surface area than the Airmotiv XT1 which gives it a small disadvantage on placement in tight spaces.