In this review, we will be comparing R-100SW and R-10SWi, two Powered Subwoofer speakers by Klipsch. Being Powered subwoofers, they both have built-in amplifiers so you don't need an external power amp or an integrated amp to power them. Let's have a brief look at the main features of Klipsch R-100SW and Klipsch R-10SWi first before getting into our more detailed comparison.
The sections below take each area in turn: driver and amplifier, frequency response, physical size and connectivity.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
The efficiency of a subwoofer is directly proportional to the total radiating are squared hence the woofer quantity and diameter.Klipsch R-100SWand Klipsch R-10SWi have the same driver set up: Both subwoofers have 1 x 10" drivers.
Frequency Response
R-100SW and R-10SWi has exactly the same frequency range of 32-120 Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Subwoofer class in our database.
Low Frequency
Subwoofer Speakers
High Frequency
Subwoofer Speakers
Cabinet Type
The Klipsch R-100SW has a Bass reflex type cabinet. On the other hand the Klipsch R-10SWi have Bass Reflex type enclosure. Bass Reflex type subwoofers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Klipsch R-10SWi Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-100SW's and Klipsch R-10SWi's external dimensions. Klipsch R-100SW has external dimensions of 372.0 x 320.0 x 459.0mm (14-5/8 x 12-9/16 x 18-1/16inch) whereas Klipsch R-10SWi has external dimensions of 370.0 x 318.0 x 462.0mm (14-9/16 x 12-1/2 x 18-3/16inch).
Klipsch R-10SWi is 2mm narrower and 2mm shorter than Klipsch R-100SW but it is also 3mm deeper.
Below you can see the front view size comparison of Klipsch R-100SW and Klipsch R-10SWi in scale.
Comparison image of Klipsch R-100SW and Klipsch R-10SWi Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-100SW is approximately 1468.8cm2 / 227.7inch2 and base area of the Klipsch R-10SWi is approximately 1469.2cm2 / 227.7inch2. The R-100SW requires 0% less surface area than the R-10SWi which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a subwoofer may become an important factor if you need to move and reposition the unit often to find the optimal positioning, also known as 'Subwoofer Crawling'. The Klipsch R-100SW weighs 10.91kg / 24lbs and the Klipsch R-10SWi weighs 11.59kg / 25.5lbs. This makes the R-10SWi 6% heavier than the R-100SW.
Here is a comparison of how R-100SW and R-10SWi's weights compare with the average, max and min weights in Powered Subwoofer class.
Weight
All Subwoofer Speakers
What's in the Box of Klipsch R-100SW?
Here are the items that are included inside the box of R-100SW:
- Powered sub
- Grille (installed)
- 6.5-feet AC power cord
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of Klipsch R-10SWi?
Here are the items that come with the R-10SWi:
- Powered sub
- Wireless transmitter (attached 12
 Port Position |
Front
vs
Rear
|
Gives more flexibility placing close to walls |
 Base Surface Area |
1468cm2
vs
1469cm2
|
Takes less floor space |
 Height |
370mm
vs
372mm
|
Easier to fit in smaller spaces |
 Price per pair* |
274USD
vs
275USD
|
costs less (*prices may change depending on the seller, location and time) |
 Wireless Operation |
Yes
vs
No
|
Connect your subwoofer to your system wireless |
| General |
Klipsch R-100SW |
Klipsch Reference R-10SWi |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Powered Subwoofer |
Powered Subwoofer |
| Max Amplifier Output |
150 watts |
150 watts |
| Frequency Response |
32-120 Hz |
32-120 Hz |
Amplifier |
|
|
| Watts RMS (Continuous) |
150-watt RMS |
150-watt RMS |
| Watts Peak (Max) |
300-watt RMS |
300-watt RMS |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
10" |
10" |
| Woofer Composition |
Copper-spun IMG |
Copper IMG |
| Tweeter Size |
- |
- |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Firing Direction |
front |
rear |
Physical Specs |
|
|
| Height |
372.0mm (14.6") |
370.0mm (14.6") |
| Width |
320.0mm (12.6") |
318.0mm (12.5") |
| Depth |
459.0mm (18.1") |
462.0mm (18.2") |
| Weight |
10.91kg (24lbs) |
11.59kg (25.5lbs) |
| Enclosure |
Bass reflex |
Bass Reflex |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
Other |
|
|
| Parts Warranty |
2 Years |
2 Years |
| Labor Warranty |
2 Years |
2 Years |