SpeakerDecision
  • SPEAKERS
    • By Type
      Passive Bookshelf Speakers Passive Floor-standing Speakers Passive Center Channel Speakers Passive In-wall Speakers All Passive Speakers Powered Subwoofers Powered Stereo Speakers
      By Feature
      HDMI Input Room Correction Subwoofer Output Front Firing Port Handheld Remote Roon Ready
      By Brand
      Acoustic Energy Aperion Arendal Sound ATC Audio-Technica Audioengine Bluesound Bowers Wilkins Buchardt Cambridge Audio Canton Castle DALI Definitive Technology Dynaudio Edifier ELAC Emotiva Fluance Focal Fyne Audio Genelec GoldenEar Harbeth Jamo JBL Kanto KEF KLH Klipsch Leak Mackie Magico Magnepan MartinLogan McIntosh Mission MoFi Monitor Audio Nuvo Onkyo OSD Paradigm Perlisten Polk Audio PS Audio PSB Q Acoustics REL Revel Russound Sennheiser Sonos Sonus faber Sony Spendor SVS Tannoy Technics Triangle Velodyne Victrola Wharfedale Wilson Audio Yamaha
  • AMPLIFIERS
    • By Type
      All Amplifiers Integrated Amplifiers Stereo Receivers Streaming Amplifiers Power Amplifiers Compact Amplifiers
      By Power
      Up to 60 watts 61 to 90 watts 91 to 120 watts 121 to 180 watts Over 180 watts
      By Feature
      HDMI Input Room Correction Subwoofer Output Handheld Remote Roon Ready
      Home Theater
      All Home Theater Receivers Anthem ARCAM Denon Integra JBL Marantz MartinLogan McIntosh NAD Onkyo Sony Yamaha
      Headphone Amps
      All Headphone Amplifiers Cambridge Audio iFi Audio McIntosh Naim Pro-Ject Rotel Schiit Audio Sennheiser Yamaha
      Multi-Zone
      All Multi-Zone Amplifiers JBL McIntosh OSD Rotel Russound Sonos
      By Brand
      Accuphase Advance Paris Anthem Arcam Audio Research AudioControl Audioengine Audiolab Bluesound Bose Buchardt Cambridge Audio Cayin Denon Devialet ELAC Emotiva Esoteric Eversolo FiiO Fosi Audio Hegel HiFi Rose Integra JBL Layer Audio Design LEAK Luxman Marantz Mark Levinson McIntosh Michi MISSION MOON Musical Fidelity NAD Naim Onkyo OSD Parasound Pass Labs Peachtree PrimaLuna Primare PS Audio Rega Rogue Audio Roksan Rotel Schiit Audio Sonos Sony SVS T+A TEAC Technics Vincent WiiM Yamaha
  • SOUNDBARS
    • Soundbars
      Soundbars Home All Soundbars (filter + sort) Size Simulator
      By TV Size
      43-50 inch TVs 55 inch TVs 65 inch and larger
      By Feature
      Dolby Atmos height channels Subwoofer included Can add rear speakers Compact (30 in or narrower) Under $500
      By Brand
      Bluesound Bose Denon Devialet Dual Focal Furrion Harman Kardon JBL KEF Klipsch Marshall Naim Polk Audio Samsung Sennheiser Sonos Sony WiiM Yamaha
  • SMART FIND
  • TOOLS
  • BLOG
  1. Home
  2. Amplifiers
  3. Yamaha R200A vs Audioengine N22
Yamaha R200A vs Audioengine N22
x
Amp to replace
Change

Yamaha R200A

Stereo Receiver | 100 watts RMS into 8-ohms

Yamaha R200A
Check price atAmazon›
Change
    
Audioengine N22

Integrated Amplifier | 22 watts RMS into 8-ohms

Audioengine N22
Check price atAmazon›
Yamaha R200A Yamaha R200A
Check price atAmazon›
Audioengine N22 Audioengine N22
Check price atAmazon›
Yamaha R200A
See at AMAZON
Audioengine N22
See at AMAZON

Yamaha R200A vs Audioengine N22 Integrated Amplifier Comparison

In this review, we will be comparing R200A and N22, two s from Yamaha and Audioengine. Let's have a brief look at the main features of Yamaha R200A and Audioengine N22 first before getting into our more detailed comparison.

Key SpecsYamaha R200AAudioengine N22
BrandYamaha
Japan · founded 1887
Audioengine
United States · founded 2005
Power100 watts x 2 channels into 8 ohms (40 Hz-20 kHz, 0.2% THD); dynamic power 125/150/165/180 watts into 8/6/4/2 ohms22 watts x 2 channels into 8 ohms
Amplifier class—Class A/B
Built-in DACNoNo
Phono inputYesNo
Headphone output—3.5mm
BluetoothYesNo
Weight7.30kg / 16.1lbs1.61kg / 3.5lbs
Dimensions (H x W x D)5.39" x 17.13" x 12.91"
137mm x 435mm x 328mm
7-1/4" x 4-1/16" x 7-5/8"
185.0mm x 104.0mm x 194.0mm

The rest of this page covers where each one wins, how they compare in size, their inputs and outputs, the full specifications and a verdict.


Reasons to choose Yamaha R200A over Audioengine N22
Handheld Remote Yes vs No Control the amplifier by the included RC
Watts into 8-ohms 100 watts vs 22 watts Delivers higher power into 8-ohms speakers
Bluetooth Yes vs No Stream music via Bluetooth devices
Total Analog Inputs 3 vs 2 More options for connecting Analog sources
PhonoInput Yes vs No Connect a turntable directly to your amp
Optical Digital Inputs 0 vs No More options for connecting Digital sources
Coaxial Digital Inputs 0 vs No More options for connecting Digital sources
Height 137mm vs 185mm Easier to fit in smaller spaces
Radio Tuner AM/FM with 40 presets vs Not stated Built-in radio, so no extra box for broadcast listening

Reasons to choose Audioengine N22 over Yamaha R200A
MSRP Price(*) 199USD vs 300USD costs less (*prices may change depending on the seller, location and time)
Total Harmonic Distortion (THD) 0.02% vs 0.2% Less Harmonic Distortion
Base Surface Area 201.8cm2/ 31.3inch2 vs 1426.8cm2/ 221.2inch2 takes less space in your room

Size, drawn to scale

FRONTYamaha R200A front: 435 x 137 mm (17.1 x 5.4 in)Audioengine N22 front: 104 x 185 mm (4.1 x 7.3 in)Yamaha R200A435 × 137 mmAudioengine N22104 × 185 mmTOP / FOOTPRINTYamaha R200A footprint: 435 x 328 mm (17.1 x 12.9 in)Audioengine N22 footprint: 104 x 194 mm (4.1 x 7.6 in)Yamaha R200A435 × 328 mmAudioengine N22104 × 194 mm
Both amplifiers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.

One scale for both, aligned at the back panels the way they would sit against a wall, so the deeper one visibly stands further out.

Yamaha R200A needs about 607% more shelf area. Yamaha R200A is 134mm deeper - the measurement that decides whether a rack door closes. Audioengine N22 is 48mm taller.

Inputs and Outputs

The input and output selections that are offered is an important factor when comparing two amplifiers. Here you can find how the I/O selections of the Yamaha R200A and Audioengine N22 differs from each other.

Yamaha R200A Inputs
  • Total Number of Analog Inputs: 3
  • RCA Line Input
  • Phono Input
  • 0 Optical Digital Input
  • 0 Coaxial Digital Input
Audioengine N22 Inputs
  • Total Number of Analog Inputs: 2
Outputs
  • Mono RCA (Sub) Preamp Outputs
  • Subwoofer Output
Outputs
  • Stereo RCA Preamp Outputs
  • 3.5mm Headphone Output
Audioengine N22 Back View
Audioengine N22 Back View (Click the image for the larger version)

What's in the Box of Yamaha R200A?

Here are the items that are included inside the box of R200A:
  • R200A stereo receiver
  • Remote control
  • AAA batteries
  • AM antenna
  • FM antenna
  • Quick guide
  • Safety guide

What's in the Box of Audioengine N22?

Here are the items that come with the N22:
  • Integrated amplifier
  • Power supply with attached 6-feet DC output cord (17.5 volt/1.8 amp)
  • 6-feet AC power cord
  • Two 70-inch Speaker wires (each with tinned bare wire on both ends)
  • 38-inch RCA patch cord
  • 78-inch Stereo mini-jack cable (3.5mm stereo mini-jack connector on each end)
  • Cloth drawstring cable bag
  • Cloth drawstring power supply bag
  • Cloth drawstring amplifier bag
  • Setup guide
  • Audioengine product brochure

Yamaha R200A vs Audioengine N22 full specifications

Every spec we hold for both, side by side
SpecificationYamaha R200AAudioengine N22
Overview
BrandYamahaAudioengine
TypeIntegrated AmplifierIntegrated Amplifier
Channels22
Amplifier class–Class A/B
Output devicesSolid StateSolid State
ReleasedOctober 2026October 2010
List price$300$199
Power and performance
Power into 8 ohms100 W RMS22 W RMS
Power, as rated100 watts x 2 channels into 8 ohms (40 Hz-20 kHz, 0.2% THD); dynamic power 125/150/165/180 watts into 8/6/4/2 ohms22 watts x 2 channels into 8 ohms
Minimum impedance–4 ohms
Signal-to-noise ratio–95 dB
THD0.2%0.02%
Frequency bandwidth40 Hz-20 kHz20 Hz-22 kHz
Digital and DAC
Built-in DACNoNo
Network and streaming
Wi-FiNo–
EthernetNo–
BluetoothYesNo
Bluetooth version5.3–
AirPlay 2NoNo
Chromecast–No
Roon–No
BluOS–No
HEOSNoNo
MusicCastNo–
DTS Play-Fi–No
Inputs
Analogue inputs32
RCA inputsYes–
Phono inputYesNo
Optical digital–No
Coaxial digital–No
USB inputNoNo
USB typeUSB (firmware updates only)USB-A(power or charge a USB bus-powered device)
HDMI inputNoNo
HDMI ARC / eARCNoNo
Outputs
Preamp outputsMono RCA (Sub)Stereo RCA
Pre-out / main-in loop–No
Subwoofer outputYes–
Headphone output–3.5mm
Speaker terminalsBinding posts–
A/B speaker terminalsYes–
Features and control
CD playerNoNo
Radio tunerAM/FM with 40 presets–
Handheld remoteYesNo
RS232 port–No
Physical
Dimensions (H x W x D)137mm x 435mm x 328mm185.0mm x 104.0mm x 194.0mm
Dimensions, inches5.39inch x 17.13inch x 12.91inch7-1/4inch x 4-1/16inch x 7-5/8inch
Weight7.30 kg (16.09 lbs)1.61 kg (3.55 lbs)
FinishesBlack, Silver–
Removable power cord–AC power adapter
Parts warranty2 Years3 Years
Labour warranty2 Years3 Years

A dash means the manufacturer does not publish that figure, or it does not apply. 51 specifications compared.

Verdict

These are not the same size of amplifier: Yamaha R200A has roughly 4.5x the power of Audioengine N22. That is about 6.6dB, so it is a question of room size and how hard your speakers are to drive, not of one being the better amplifier.

AreaBetterWhy
PowerAYamaha R200A has more power - 100W against 22W into 8 ohms. That is about 6.6dB - a different class of amplifier rather than a bigger version of the same one, and far more than most rooms will ever ask for.
Analogue inputsAYamaha R200A takes more analogue sources - 3 against 2.
Phono stagedependsYamaha R200A has a built-in phono stage and Audioengine N22 does not. Decisive if you own a turntable, completely irrelevant if you do not - and an outboard phono stage is easy to add later either way.
Room to growevenly matchedThe same expansion options on both.
Shelf spacedependsAudioengine N22 takes up about 86% less shelf area (202cm² against 1427cm²), and it is 134mm shallower, which is the measurement that decides whether a rack door shuts.
PriceBAudioengine N22 costs less - $199 against $300 at list.
Watts per dollarAYamaha R200A is the cheaper watt - about $3 per watt against $9. A blunt measure, and it says nothing about how either sounds, but it is the honest one for raw output.

A Yamaha R200A  B Audioengine N22
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.

Which should you choose?

The usual trade-off: Yamaha R200A measures better, Audioengine N22 costs about 34% less. With most speakers in most rooms that gap is smaller in practice than it looks here. Start with the room. In a large or open-plan room, or with speakers that are hard to drive - low sensitivity, or an impedance that dips - Yamaha R200A has the headroom, and headroom is what stops an amplifier hardening up on peaks. At desk distance or in a small room, 22 watts is already more than most people ever use, and the extra 78 watts would be headroom you pay for and never hear. If you play records, Yamaha R200A saves you buying a phono stage; if you do not, ignore that row entirely.

What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.

LATEST BLOG POSTS
Klipsch Stratos HP-2 and HP-3: Two-Way Headphones for $999.99 and $1,199.99, Dressed Like Its Heritage Speakers
Cambridge Audio L/R X Now Corrects for Your Room, Free: How It Stacks Up Against the KEF LS50 Wireless II and LS LUXE
Acoustic Energy AE2 and AE1 40th Anniversary: How the 1987 Icons Line Up Against the Linton and L82 Classic
Stereo Amplifiers With HDMI: All 77, and the 37 That Do eARC
KEF XIO Can Now Use Your LSX II or Coda W as Rear Speakers
KEF LS LUXE vs LS60 Wireless vs LS50 Wireless II: What the $4,000 KEF Adds
Sonus faber Olympica G3: the Five Models Lined Up, and the Amp the $24,000 Olympica III Wants
Revel Performa4 M146 vs Performa3 M106: What Changed, and the Amp It Now Wants

Most Popular Amplifiers
Yamaha A-S301
Yamaha A-S301
60 watts into 8-ohms
Audiolab 7000A
Audiolab 7000A
70 watts into 8-ohms
Yamaha A-S801
Yamaha A-S801
100 watts into 8-ohms
Yamaha A-S501
Yamaha A-S501
85 watts into 8-ohms
Sonos Amp
Sonos Amp
125 watts into 8-ohms
Denon PMA-900HNE
Denon PMA-900HNE
50 watts into 8-ohms
Denon PMA-600NE
Denon PMA-600NE
45 watts into 8-ohms
Denon PMA-1700NE
Denon PMA-1700NE
70 watts into 8-ohms
Marantz PM6007
Marantz PM6007
45 watts into 8-ohms
WiiM Amp Pro
WiiM Amp Pro
60 watts into 8-ohms
This site contains affiliate links. We may be compensated if you make a purchase after clicking through one of them. As an Amazon Associate we earn from qualifying purchases.
Copyright © 2026 by SpeakerDecision
About Privacy Contact US Camera Decision

Report a Correction