No single best amplifier here. What decides it is what you have to drive, what you need to plug in, and how much of the system you want in one box.
| Area | Better | Why |
|---|
| Power | evenly matched | Effectively the same output - 50W against 50W into 8 ohms is under 1dB, which is not an audible difference in loudness. |
| Grip on hard loads | evenly matched | Both behave much the same into 4 ohms - output increases modestly (72W and 75W). |
| Built-in DAC | evenly matched | Both have a DAC on board with much the same capability. |
| Analogue inputs | A | Rega Brio Mk 7 takes more analogue sources - 4 against 3. |
| Shelf space | depends | Rega Brio Mk 7 takes up about 41% less shelf area (788cm² against 1328cm²), and it is 66mm shallower, which is the measurement that decides whether a rack door shuts. |
| Price | B | Audiolab 6000A MKII costs less - $1,099 against $1,195 at list. |
A Rega Brio Mk 7 B Audiolab 6000A MKII
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both amplifiers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: Rega Brio Mk 7 measures better, Audiolab 6000A MKII costs about 8% less. With most speakers in most rooms that gap is smaller in practice than it looks here.
What a spec sheet cannot show: how either sounds with your speakers, how the controls feel day to day, and what the app is like to live with - which is where most all-in-one amplifiers are actually won or lost. Power figures are the manufacturers' own and are not measured to a common standard, so treat small differences as noise. If you can hear both, that will tell you more than any row above.