Perlisten R7c is a 3-way Passive Bass Reflex Center Channel speaker by Perlisten. It was released in 2023. Center channel speaker is an important component of a home theater system set-up as it delivers the listener significant part of the on-screen dialogue from your television. It features a Tweeter and x " Woofer.
4x 165mm HPF diaphragms (cones)
The speaker has a frequency range of 36-32k Hz and a sensitivity of 90 dB. Perlisten R7c has an MSRP of 9990$ per pair.
Room Size Suitability
The size of the room where you plan to use the Perlisten R7c is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking through our links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Perlisten R7c Speaker
Perlisten R7c has a Frequency response range of 36-32k Hz at ±3dB and Power Range of 100 - 400W RMS watts.
Here we have a comparison of how R7c's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Center Channel Speakers
Impedance and Sensitivity
Perlisten R7c's nominal impedance level is
4 ohms but can go down to as low as
3.2 ohms, and has a sensitivity of
90 dB.
Sensitivity
Center Channel Speakers
Nominal Impedance of the 4 Ohms means that the Perlisten R7c is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Perlisten R7c with an AVR but use an Integrated Amplifier instead.
Sensitivity
90dB of the Perlisten R7c is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Perlisten R7c plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Perlisten R7c
Even though the nominal impedance of the R7c is 4 ohms, the minimum impedance level of this speaker according to Perlisten is 3.2 ohms Perlisten R7c so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Perlisten R7c need?
At normal listening levels in a medium room, about
15–240 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? See every integrated amplifier we cover.
Input Type
R7c features Binding post type connectors. Bi-amping and Bi-wiring are not possible.
Work out what gauge speaker cable this run needs →
Perlisten R7c External Dimensions and Weight
Perlisten R7c has external dimensions of (Height x Width x Depth) 9.06 x 36.22 x 11.81inch (230.1 x 920.0 x 300.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Perlisten R7c is approximately 2760.0cm2 / 427.8inch2.
Find speakers that fit your shelf or alcove →
WeightThe Perlisten R7c weighs 36.80kg / 81lbs per piece. Here is a comparison of how R7c's weight compares with the average, max and min weights in its class.
Weight
All Center Channel Speakers
Weight
Center Channel Speakers under $10000
Cabinet type and Materials
Perlisten R7c has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Perlisten R7c come with a Grille?
R7c comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Perlisten R7c.
Official Product Page
Official manufacturer's product page for the Perlisten R7c speaker can be found below:
Official Product Page for Perlisten R7c