Elac Solano 2.0 BS283.2-GB is a 2-way Passive Bass Reflex Bookshelf speaker by ELAC. It was released in April 2024. It features a JET 6 AMT Tweeter and 1 x 6" AS XR cone Woofer. The speaker has a frequency range of 41-50k Hz and a sensitivity of 85 dB. Elac Solano 2.0 BS283.2-GB has an MSRP of 1999$ per pair.
Room Size Suitability
The size of the room where you plan to use the Elac Solano 2.0 BS283.2-GB is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Average |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
ELAC's Solano 2.0 Series of Loudspeakers
Solano 2.0 BS283.2-GB is a member of ELAC's Solano 2.0 series of Passive speakers. The Solano range is ELAC's mid-tier line, pairing a JET folded-ribbon tweeter with aluminium-sandwich drivers. Below you can see the main specs of these speakers.
ELAC Solano 2.0 Series Speakers
ELAC Solano 2.0 Series Speakers
Frequency Response of the Elac Solano 2.0 BS283.2-GB Speaker
Elac Solano 2.0 BS283.2-GB has a Frequency response range of 41-50k Hz and Power Range of Up to 100 watts. With a minimum frequency of 41 Hz, Solano 2.0 BS283.2-GB delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Solano 2.0 BS283.2-GB's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Bookshelf Speakers
Elac Solano 2.0 BS283.2-GB
Thinking about a subwoofer for the Elac Solano 2.0 BS283.2-GB?
Crossover frequency of the Elac Solano 2.0 BS283.2-GB?
The crossover frequency of the Solano 2.0 BS283.2-GB is set to 2400 Hz. This is the threshold frequency where the higher frequency signals over this level are sent to the tweeter and the lower-frequency signals are sent to the woofer by the crossover component.
Impedance and Sensitivity
Elac Solano 2.0 BS283.2-GB's nominal impedance level is
4 ohms but can go down to as low as
3.2 ohms, and has a sensitivity of
85 dB.
Sensitivity
Bookshelf Speakers
Elac Solano 2.0 BS283.2-GB
Nominal Impedance of the 4 Ohms means that the Elac Solano 2.0 BS283.2-GB is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Elac Solano 2.0 BS283.2-GB with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only 85 dB, Elac Solano 2.0 BS283.2-GB is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps. Work out how loud the Elac Solano 2.0 BS283.2-GB plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
Minimum Impedance of the Elac Solano 2.0 BS283.2-GB
Even though the nominal impedance of the Solano 2.0 BS283.2-GB is 4 ohms, the minimum impedance level of this speaker according to ELAC is 3.2 ohms Elac Solano 2.0 BS283.2-GB so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
What amplifier does the Elac Solano 2.0 BS283.2-GB need?
At normal listening levels in a medium room, about
47–100 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $2,000, or every amplifier we cover.
Input Type
Solano 2.0 BS283.2-GB features type connectors.
Elac Solano 2.0 BS283.2-GB External Dimensions and Weight
Elac Solano 2.0 BS283.2-GB has external dimensions of (Height x Width x Depth) 13 x 7.5 x 9.76 inches (331 x 190 x 248 mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Elac Solano 2.0 BS283.2-GB is approximately 471.2cm2 / 73.0inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Elac Solano 2.0 BS283.2-GB weighs 8.00kg / 17.6lbs per piece. Here is a comparison of how Solano 2.0 BS283.2-GB's weight compares with the average, max and min weights in its class.
Weight
All Bookshelf Speakers
Elac Solano 2.0 BS283.2-GB
Weight
Bookshelf Speakers under $2000
Elac Solano 2.0 BS283.2-GB
Cabinet type and Materials
Elac Solano 2.0 BS283.2-GB has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Elac Solano 2.0 BS283.2-GB is a bottom-firing port speaker.
Available colors
Elac Solano 2.0 BS283.2-GB is available in Black High Gloss and White High Gloss.
Wall Mounting
Solano 2.0 BS283.2-GB doesn't sport any built-in mounting bracket, so you need an external structure to mount it on walls.
Recommended Accessories
Here is a list of accessories that we think you may need for the Elac Solano 2.0 BS283.2-GB.
- Speaker Cable and Connectors
- Vibration Isolators: IsoAcoustics isolators are our favorite isolators but you may find more affordable options too.
- Acoustic Panels and Treatments: Your room is as important as your stereo equipment so acoustic treatments goes a long way in improving the overall performance.
- Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation.
Official Brochure
Here is a link to download the official brochure for the Elac Solano 2.0 BS283.2-GB speaker:
Official Brochure for Elac Solano 2.0 BS283.2-GB
Official Product Page
Official manufacturer's product page for the Elac Solano 2.0 BS283.2-GB speaker can be found below:
Official Product Page for Elac Solano 2.0 BS283.2-GB