Elac Solano 2.0 FS287.2-GB is a 3-way Passive Bass Reflex Floor-standing speaker by Elac. It features a JET 6 AMT Tweeter and 2 x 6" AS XR cone Woofer. The speaker has a frequency range of 30-50k Hz and a sensitivity of 87 dB. Elac Solano 2.0 FS287.2-GB has an MSRP of 3999$ per pair.
Room Size Suitability
The size of the room where you plan to use the Elac Solano 2.0 FS287.2-GB is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Bad |
| Small Room | Poor |
| Mid-size Room | Good |
| Large Room | Good |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Elac's Solano 2.0 Series of Loudspeakers
Solano 2.0 FS287.2-GB is a member of Elac's Solano 2.0 series of Passive speakers. Below you can see the main specs of these speakers.
Elac Solano 2.0 Series Speakers
Elac Solano 2.0 Series Speakers
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.
Frequency Response of the Elac Solano 2.0 FS287.2-GB Speaker
Elac Solano 2.0 FS287.2-GB has a Frequency response range of 30-50k Hz at ±3dB and Power Range of Up to 170 watts. With a minimum frequency of 30 Hz, Solano 2.0 FS287.2-GB delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
To focus on the subwoofers that are in a similar price range with Elac Solano 2.0 FS287.2-GB, check out the Powered Subwoofers under $5000. Alternatively, find the Full list of Powered Subwoofers regardless of the price.
Here we have a comparison of how Solano 2.0 FS287.2-GB's Low and High frequency values compare with the average, max and min Low and High frequency values in its class.
Low Frequency
Floor-standing Speakers
Elac Solano 2.0 FS287.2-GB
High Frequency
Floor-standing Speakers
Elac Solano 2.0 FS287.2-GB
Crossover frequency of the Elac Solano 2.0 FS287.2-GB?
Solano 2.0 FS287.2-GB is a 3-way speaker and its crossover frequency between the woofer and the midrange set to Hz and the Crossover frequency between the midrange and the tweeter is set to 2400Hz.
Impedance and Sensitivity
Elac Solano 2.0 FS287.2-GB's nominal impedance level is
4 ohms but can go down to as low as
3.5 ohms, and has a sensitivity of
87 dB.
Sensitivity
Floor-standing Speakers
Elac Solano 2.0 FS287.2-GB
Nominal Impedance of the 4 Ohms means that the Elac Solano 2.0 FS287.2-GB is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Elac Solano 2.0 FS287.2-GB with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only 87 dB, Elac Solano 2.0 FS287.2-GB is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Minimum Impedance of the Elac Solano 2.0 FS287.2-GB
Even though the nominal impedance of the Solano 2.0 FS287.2-GB is 4 ohms, the minimum impedance level of this speaker according to Elac is 3.5 ohms Elac Solano 2.0 FS287.2-GB so while choosing an amplifier, you should ideally check if the unit you are considering can provide this impedance level.
Check the amplifiers that are in a similar price range to the Elac Solano 2.0 FS287.2-GB:
Input Type
Solano 2.0 FS287.2-GB features type connectors. Bi-amping and Bi-wiring are not possible.
Elac Solano 2.0 FS287.2-GB External Dimensions and Weight
Elac Solano 2.0 FS287.2-GB has external dimensions of (Height x Width x Depth) 38.78 x 10.2 x 12 inches (985 x 260 x 300 mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Elac Solano 2.0 FS287.2-GB is approximately 780.0cm2 / 120.9inch2.
WeightThe Elac Solano 2.0 FS287.2-GB weighs 19.00kg / 41.8lbs per piece. Here is a comparison of how Solano 2.0 FS287.2-GB's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Elac Solano 2.0 FS287.2-GB
Weight
Floor-standing Speakers under $5000
Elac Solano 2.0 FS287.2-GB
Cabinet type and Materials
Elac Solano 2.0 FS287.2-GB has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Port Position
Elac Solano 2.0 FS287.2-GB is a bottom-firing port speaker
Available colors
Elac Solano 2.0 FS287.2-GB is available in Black High Gloss and White High Gloss.
Recommended Accessories
Here is a list of accessories that we think you may need for the Elac Solano 2.0 FS287.2-GB.
Official Brochure
Here is a link to download the official brochure for the Elac Solano 2.0 FS287.2-GB speaker:
Official Brochure for Elac Solano 2.0 FS287.2-GB
Official Product Page
Official manufacturer's product page for the Elac Solano 2.0 FS287.2-GB speaker can be found below:
Official Product Page for Elac Solano 2.0 FS287.2-GB