In this review, we will be comparing Solano 2.0 BS283.2-GB and Carina BS243.4, two Passive Bookshelf speakers from Elac and ELAC. Let's have a brief look at the main features
of Elac Solano 2.0 BS283.2-GB and ELAC Carina BS243.4 first before getting into our more
detailed comparison.
What size room are the Elac Solano 2.0 BS283.2-GB and ELAC Carina BS243.4 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Elac Solano 2.0 BS283.2-GB and ELAC Carina BS243.4 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Solano 2.0 BS283.2-GB and Carina BS243.4 are 2-way speakers.
Driver |
Elac Solano 2.0 BS283.2-GB |
ELAC Carina BS243.4 |
Driver Setup
|
2-way
|
2-way
|
Tweeter
|
-inch
|
1-inch
|
Midrange
|
- |
- |
Woofer
|
1 x 6-inch
|
1 x 5.25-inch
|
Solano 2.0 BS283.2-GB features a " JET 6 AMT Tweeter and 1 x 6" AS XR cone Woofer with a Crossover frequency at 2400 Hz. On the other hand, the Carina BS243.4 features a 1" JET AMT (Ribbon) Tweeter and 1 x 5.25" Aluminum Woofer .
Frequency Response
Solano 2.0 BS283.2-GB has a frequency range of 41-50k Hz whereas Carina BS243.4 has a frequency range of 46-30k Hz. With a minimum frequency of 41Hz, the Solano 2.0 BS283.2-GB can go significantly deeper on the low side and provide stronger bass compared to the Carina BS243.4's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
Elac Solano 2.0 BS283.2-GB
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Solano 2.0 BS283.2-GB is a 4 ohms speaker compared to the Carina BS243.4 which has a nominal impedance of 6 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Solano 2.0 BS283.2-GB can provide this impedance level.
On the other hand, they have the same sensitivity of 85 dBdB.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Cabinet Type and Port Position
Both Solano 2.0 BS283.2-GB and Carina BS243.4 have bottom firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Elac Solano 2.0 BS283.2-GB's and ELAC Carina BS243.4's external dimensions. Elac Solano 2.0 BS283.2-GB has external dimensions of 331 x 190 x 248 mm ( 13 x 7.5 x 9.76 inches) whereas ELAC Carina BS243.4 has external dimensions of 321.0 x 205.0 x 247.0mm ( 12-5/8 x 8-1/16 x 9-11/16inch) .
ELAC Carina BS243.4 is 10mm shorter and 1mm less deeper than Elac Solano 2.0 BS283.2-GB but it is also 15mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Elac Solano 2.0 BS283.2-GB is approximately 471.2cm2 / 73.0inch2 and base area of the ELAC Carina BS243.4 is approximately 506.4cm2 / 78.5inch2. The Solano 2.0 BS283.2-GB requires 7% less surface area than the Carina BS243.4 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Elac Solano 2.0 BS283.2-GB weighs 8.00kg / 17.6lbs and the ELAC Carina BS243.4 weighs 6.70kg / 14.7lbs. This makes the Solano 2.0 BS283.2-GB 19% heavier than the Carina BS243.4.
Here is a comparison of how Solano 2.0 BS283.2-GB and Carina BS243.4's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
Elac Solano 2.0 BS283.2-GB
What's in the Box of ELAC Carina BS243.4?
Here are the items that come with the Carina BS243.4:
2 Bookshelf loudspeakers 4 Jumper straps (pre-intalled) Operating Instructions
Woofer Size |
6 inches
vs
5.25 inches
|
Larger woofer |
Low Frequency Response |
41 Hz
vs
46 Hz
|
Generates deeper bass |
High Frequency Response |
50k Hz
vs
30k Hz
|
Generates higher frequency |
Base Surface Area |
471cm2 (190x248mm)
vs
506cm2 (205x247mm)
|
Takes less floor space |
Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
Height |
321mm
vs
331mm
|
Easier to fit in smaller spaces |
Price per pair* |
1500USD
vs
1999USD
|
costs less (*prices may change depending on the seller, location and time) |
General |
Elac Solano 2.0 BS283.2-GB |
ELAC Carina BS243.4 |
Brand |
Elac |
ELAC |
Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
Power Range |
Up to 100 watts |
30-100 watts |
Sensitivity |
85 dB |
85 dB |
Impedance |
4 ohms |
6 ohms |
Impedance |
3.2 ohms |
n/a |
Frequency Response |
41-50k Hz |
46-30k Hz |
Drivers |
|
|
Woofer Quantity |
1 |
1 |
Woofer Size |
6" |
5.25" |
Woofer Composition |
AS XR cone |
Aluminum |
Woofer Surround Material |
Rubber |
Rubber |
Tweeter Size |
- |
1" |
Tweeter Type |
JET 6 AMT |
JET AMT (Ribbon) |
Aimable Tweeter |
No |
No |
Midrange Driver |
No |
No |
Crossover Frequency |
2400 Hz |
n/a |
Firing Direction |
bottom |
bottom |
Physical Specs |
|
|
Height |
331.0mm (13") |
321.0mm (12.6") |
Width |
190.0mm (7.5") |
205.0mm (8.1") |
Depth |
248.0mm (9.8") |
247.0mm (9.7") |
Weight |
8.00kg (17.6lbs) |
6.70kg (14.7lbs) |
Enclosure |
Bass Reflex |
Bass Reflex |
Finish |
n/a |
MDF/Polymer |
Available Colors |
Black High Gloss, White High Gloss |
Satin Black,Satin White |
Mounting Bracket |
|
No |
Recommended Stand Height |
n/a |
24-28" |
Moisture Resistancy |
No |
No |
Connections |
|
|
Biamp Inputs |
n/a |
Yes |
Other |
|
|
Parts Warranty |
|
3 Years |
Labor Warranty |
|
3 Years |