Canton Townus 90 is a 3-way Passive Bass Reflex Floor-standing speaker by Canton. It was released in 2021. It features a 1" Tweeter, 1 x 6.85" Midrange and 2 x 6.85" Titanium Woofer.
2 x 6.85" titanium woofer, 6.85" titanium midrange, 1" ceramic tweeter.
The speaker has a frequency range of 20-40k Hz. Canton Townus 90 has an MSRP of 4695$ per pair.
Room Size Suitability
The size of the room where you plan to use the Canton Townus 90 is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Poor |
| Small Room | Average |
| Mid-size Room | Good |
| Large Room | Average |
| Very Large Room | Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Frequency Response of the Canton Townus 90 Speaker
Canton Townus 90 has a Frequency response range of 20-40k Hz. With a minimum frequency of 20 Hz, Townus 90 delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Townus 90's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Floor-standing Speakers
Thinking about a subwoofer for the Canton Townus 90?
Crossover frequency of the Canton Townus 90?
The crossover points of the Townus 90 are set at 170 / 3200 Hz.
Impedance and Sensitivity
Canton Townus 90's nominal impedance level is
ohms and has a sensitivity of
.
Sensitivity
Floor-standing Speakers
Nominal Impedance of the Ohms means that the Canton Townus 90 is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Canton Townus 90 with an AVR but use an Integrated Amplifier instead.
Sensitivity
With a sensitivity level of only dB, Canton Townus 90 is a difficult to drive speaker from Sensitivity perspective, make sure to choose an amplifier with a high output if you like listening to your music at high volume levels. You may especially have a hard time using Tube amplifiers which are traditionally very low power compared to Class A/B or Class D amps.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
Townus 90 features Binding post type connectors.
Work out what gauge speaker cable this run needs →
Canton Townus 90 External Dimensions and Weight
Canton Townus 90 has external dimensions of (Height x Width x Depth) 41.3 x 9.8 x 14.2inch (1049.0 x 248.9 x 360.7mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Canton Townus 90 is approximately 897.8cm2 / 139.2inch2.
Find speakers that fit your shelf or alcove → · Work out where they should sit in the room →
WeightThe Canton Townus 90 weighs 24.04kg / 52.9lbs per piece. Here is a comparison of how Townus 90's weight compares with the average, max and min weights in its class.
Weight
All Floor-standing Speakers
Weight
Floor-standing Speakers under $5000
Cabinet type and Materials
Canton Townus 90 has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Canton Townus 90 come with a Grille?
Townus 90 comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Canton Townus 90.
Official Product Page
Official manufacturer's product page for the Canton Townus 90 speaker can be found below:
Official Product Page for Canton Townus 90