In this review, we will be comparing LINTON Heritage and Rebellion, two Passive Bookshelf speakers from Wharfedale and Klipsch.
Let's have a brief look at the main features
of Wharfedale LINTON and Klipsch Heritage Rebellion first before getting into our more
detailed comparison.
| Key Specs | Wharfedale LINTON | Klipsch Heritage Rebellion |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | 1" Soft-dome | Compression Horn |
|---|
| Midrange | 5" | — |
|---|
| Woofer | 8" Woven Kevlar | 8" Paper |
|---|
| Frequency response | 40-20k Hz | 60-20k Hz |
|---|
| Sensitivity | 90 dB | 95 dB |
|---|
| Impedance | 6 ohms | 8 ohms |
|---|
| Power range | 25-200 watts | up to 200 watts |
|---|
| Weight | 18.40kg / 40.5lbs | 14.51kg / 31.9lbs |
|---|
| Dimensions (H x W x D) | 22.2" x 11.8" x 14.2"
565.0 x 300.0 x 360.0mm | 19-1/8" x 12" x 9-3/4"
485.0 x 305.0 x 247.0mm |
|---|
LINTON Heritage and Rebellion are members of Klipsch's Heritage series of speakers. Below you can find the loudspeakers from this series.
Wharfedale Heritage Series
History
What size room are the Wharfedale LINTON and Klipsch Heritage Rebellion speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Wharfedale LINTON |
Klipsch Heritage Rebellion |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
**This post contains affiliate links, and we will be compensated if you make a purchase after clicking
through our links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that LINTON Heritage is a 3-way design whereas the Rebellion is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
Wharfedale LINTONKlipsch Heritage Rebellion
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Wharfedale LINTON |
Klipsch Heritage Rebellion |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1-inch
|
-inch
|
|
Midrange
|
1 x 5-inch |
- |
|
Woofer
|
1 x 8-inch
|
1 x 8-inch
|
LINTON Heritage features a 1" woven textile Soft-dome Tweeter, a 5" Midrange and 1 x 8" Woven Kevlar Woofer with a Crossover frequency at 630Hz and 2400Hz. On the other hand, the Rebellion features a " K-702 driver Compression Horn Tweeter and 1 x 8" Paper Woofer with a Crossover frequency at 715Hz.
Frequency Response
LINTON Heritage has a frequency range of 40-20k Hz whereas Rebellion has a frequency range of 60-20k Hz. With a minimum frequency of 40Hz, the LINTON Heritage can go significantly deeper on the low side and provide stronger bass compared to the Rebellion's min frequency of 60Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
LINTON Heritage is a 6 ohms speaker compared to the Rebellion which has a nominal impedance of 8 ohms.
These two speakers also have different sensitivity levels. LINTON Heritage sensitivity is rated at 90 dB and the Rebellion's is rated at 95 dB. This 5 dB difference makes the Klipsch Heritage Rebellion a more sensitive speaker compared to Wharfedale LINTON, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Both handle the same maximum of 200 watts RMS, though LINTON Heritage is rated 25-200 watts and Rebellion up to 200 watts.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier — change it to the one you own, or any you are
considering, and watch both numbers move.
Klipsch Heritage Rebellion
Input Type and Bi-Amping / Bi-Wiring
LINTON Heritage features Binding post type posts and Rebellion has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Wharfedale LINTON's Post terminals
Cabinet Type and Port Position
Both LINTON Heritage and Rebellion have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Wharfedale LINTON's and Klipsch Heritage Rebellion's external dimensions. Wharfedale LINTON has external dimensions of 565.0 x 300.0 x 360.0mm (22.2 x 11.8 x 12.9inch) whereas Klipsch Heritage Rebellion has external dimensions of 485.0 x 305.0 x 247.0mm (19-1/8 x 12 x 9-3/4inch).
Klipsch Heritage Rebellion is 80mm shorter and 113mm less deeper than Wharfedale LINTON but it is also 5mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Wharfedale LINTON is approximately 990.0cm2 / 153.5inch2 and base area of the Klipsch Heritage Rebellion is approximately 753.4cm2 / 116.8inch2. The LINTON Heritage requires 31% more surface area than the Rebellion which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Wharfedale LINTON weighs 18.40kg / 40.5lbs and the Klipsch Heritage Rebellion weighs 14.51kg / 31.9lbs. This makes the LINTON Heritage 27% heavier than the Rebellion.
Here is a comparison of how LINTON Heritage and Rebellion's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
Klipsch Heritage Rebellion
What's in the Box of Wharfedale LINTON?
Here are the items that are included inside the box of LINTON Heritage:
- Bookshelf loudspeaker
- Grille (pre-installed)
- 4 Self-adhesive rubber feet
- Pair of white gloves
- User's Manual
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Minimum Impedance |
3.5 ohms
vs
3.3 ohms
|
Very low impedance levels puts more pressure on amplifier |
 Low Frequency Response |
40 Hz
vs
60 Hz
|
Generates deeper bass |
 Sensitivity |
95 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Nominal Impedance |
8 ohms
vs
6 ohms
|
Less selective with amplifiers |
 Height |
485mm
vs
565mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
753cm2
vs
990cm2
|
Takes less floor space |
| General |
Wharfedale LINTON Heritage |
Klipsch Heritage Rebellion |
| Brand |
Wharfedale |
Klipsch |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
25-200 watts |
up to 200 watts |
| Sensitivity |
90 dB |
95 dB |
| Impedance |
6 ohms |
8 ohms |
| Impedance |
3.5 ohms |
3.3 ohms |
| Frequency Response |
40-20k Hz |
60-20k Hz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
8" |
8" |
| Woofer Composition |
Woven Kevlar |
Paper |
| Woofer Surround Material |
Rubber |
n/a |
| Tweeter Size |
1" |
- |
| Tweeter Type |
Soft-dome |
Compression Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
5" |
No |
| Crossover Frequency |
630Hz and 2400Hz |
715Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
565.0mm (22.2") |
485.0mm (19.1") |
| Width |
300.0mm (11.8") |
305.0mm (12") |
| Depth |
360.0mm (14.2") |
247.0mm (9.7") |
| Weight |
18.40kg (40.5lbs) |
14.51kg (31.9lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood Veneer |
18 mm MDF with real wood veneer |
| Available Colors |
Walnut, Red Mahogany, Black |
Black Ash, Walnut |
| Mounting Bracket |
No |
|
| Recommended Stand Height |
18-22" |
n/a |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
A generation apart: Klipsch Heritage Rebellion is the newer design, against a 2017 model. Newer is not automatically better, but the older one is more likely to be discounted or near run-out.
| Area | Better | Why |
|---|
| Bass |
A |
Wharfedale LINTON digs deeper - 40Hz against 60Hz. |
| Amplifier needs |
B |
Klipsch Heritage Rebellion is more sensitive (95dB vs 90dB), so it goes louder on the same amplifier. |
| Amplifier match |
B |
Klipsch Heritage Rebellion is the easier load at 8 ohms. |
| Headroom |
evenly matched |
Similar power handling (200W vs 200W). |
| Size |
depends |
Klipsch Heritage Rebellion is easier to place; Wharfedale LINTON is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability |
depends |
Neither adds bi-amping, a sub output or height drivers. Klipsch Heritage Rebellion sits in a wider range (12 models), so a matched surround system is easier later. |
A Wharfedale LINTON
B Klipsch Heritage Rebellion
depends neither is better in the abstract - it turns on your room, placement or how you will use them.
Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch Heritage Rebellion has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 60Hz anyway, so judge these on the other rows instead. In a large or open-plan room, Wharfedale LINTON has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, Klipsch Heritage Rebellion is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.