In this review, we will be comparing Serafino and Amati, two Passive Floor-standing speakers by Sonus faber
Let's have a brief look at the main features
of Sonus faber Serafino and Sonus faber Amati first before getting into our more
detailed comparison.
Sonus faber Serafino Key Specs
- 4-way Design
- 1.1" Soft-Dome Tweeter
- 6" Midrange
- 2 x 7" Paper Woofer
- 30-35k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:52.00kg
- Dimensions (H x W x D): 42-15/16" x 15-9/16" x 19-1/8" ( 1091.0 x 396.0 x 485.0mm )
Sonus faber Amati Key Specs
- 4-way Design
- 1.1" Soft-Dome Tweeter
- 6" Midrange
- 2 x 8.5" Paper Woofer
- 6" Midrange
- 28-35k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-450watts
- Weight:61.00kg
- Dimensions (H x W x D): 46-5/16" x 16-3/16" x 20-3/16" ( 1176.0 x 411.0 x 512.0mm )
Serafino and Amati are members of Sonus faber's Homage series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Homage Series
History
What size room are the Sonus faber Serafino and Sonus faber Amati speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus faber Serafino |
Sonus faber Amati |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus faber Serafino and Sonus faber Amati compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Serafino and Amati are 4-way speakers.
| Driver |
Sonus faber Serafino |
Sonus faber Amati |
|
Driver Setup
|
4-way
|
4-way
|
|
Tweeter
|
1.1-inch
|
1.1-inch
|
|
Midrange
|
1 x 6-inch |
1 x 6-inch |
|
Woofer
|
2 x 7-inch
|
2 x 8.5-inch
|
Serafino features a 1.1" Silk Soft-Dome Tweeter , a 6" Midrange and 2 x 7" Paper Woofer with a Crossover frequency at 200, 250, 2400 Hz. On the other hand, the Amati features a 1.1" Silk Soft-Dome Tweeter , a 6" Midrange and 2 x 8.5" Paper Woofer with a Crossover frequency at 200, 270, 2200 Hz.
Frequency Response
Serafino has a frequency range of 30-35k Hz whereas Amati has a frequency range of 28-35k Hz. With a minimum frequency of 28Hz, the Amati can go slightly deeper then the Serafino's min frequency of 30Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Serafino and Amati have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Serafino sensitivity is rated at 90 dB and the Amati's is at 91 dB. This 1 dB difference makes the Sonus faber Amati a more sensitive speaker compared to Sonus faber Serafino, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Serafino and the Serafino can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Serafino can handle a max power of 450 watts RMS from the amp the whereas Serafino has a max power handling value of 300 watts RMS , 150 watts less than the Amati.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Serafino features Binding post type posts and Amati has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus faber Serafino's and Sonus faber Amati's external dimensions. Sonus faber Serafino has external dimensions of 1091.0 x 396.0 x 485.0mm ( 42-15/16 x 15-9/16 x 19-1/8inch) whereas Sonus faber Amati has external dimensions of 1176.0 x 411.0 x 512.0mm ( 46-5/16 x 16-3/16 x 20-3/16inch) .
Sonus faber Amati is clearly the larger of the two speakers. Its body is 15mm wider, 85mm taller and 27mm deeper than Sonus faber Serafino.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus faber Serafino is approximately 1920.6cm2 / 297.7inch2 and base area of the Sonus faber Amati is approximately 2104.3cm2 / 326.2inch2. The Serafino requires 9% less surface area than the Amati which gives it a small advantage on placement in tight spaces.