Sonus faber Vox is a 3-way Passive Bass Reflex Center Channel speaker by Sonus faber. It was released in February 2017. Center channel speaker is an important component of a home theater system set-up as it delivers the listener significant part of the on-screen dialogue from your television. It features a 1.1" Soft-Dome Tweeter, 2 x 6" Midrange and 2 x 7" Paper Woofer.
A 3-way ported centre with a 1.1 inch tweeter, 2 x 6 inch midranges and 2 x 7 inch woofers. 90 dB sensitive, 4 ohms, 50-300 W recommended, 40 Hz to 35 kHz. The Homage collection is Sonus faber's tribute to the Cremonese luthiers - lute-shaped cabinets in solid wood, built in Vicenza.
The speaker has a frequency range of 40-35k Hz and a sensitivity of 90 dB. Sonus faber Vox has an MSRP of 4500$.
Room Size Suitability
The size of the room where you plan to use the Sonus faber Vox is a crucial factor in your decision. We have assessed its suitability for various room sizes based on its dimensions and maximum power output:
| Listening Environment* |
Suitability |
| Near-field | Good |
| Small Room | Good |
| Mid-size Room | Average |
| Large Room | Poor |
| Very Large Room | No way |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
Sonus faber's Homage Series of Loudspeakers
Vox is a member of Sonus faber's Homage series of Passive speakers. Below you can see the main specs of these speakers.
See all 6 Sonus faber Homage models compared »
Sonus faber Homage Series Speakers
Frequency Response of the Sonus faber Vox Speaker
Sonus faber Vox has a Frequency response range of 40-35k Hz and Power Range of 50-300 watts. With a minimum frequency of 40 Hz, Vox delivers deep bass that will likely satisfy most listeners, especially those who enjoy music. However, movie enthusiasts and music fans who prefer a full range of sound may still benefit from adding a subwoofer.
Here we have a comparison of how Vox's Low frequency value compares with the average, max and min Low frequency values in its class.
Low Frequency
Center Channel Speakers
Thinking about a subwoofer for the Sonus faber Vox?
Crossover frequency of the Sonus faber Vox?
Vox is a 3-way speaker and its crossover frequency between the woofer and the midrange is set to 280 Hz and the crossover frequency between the midrange and the tweeter is set to 2100 Hz.
Impedance and Sensitivity
Sonus faber Vox's nominal impedance level is
4 ohms and has a sensitivity of
90 dB.
Sensitivity
Center Channel Speakers
Nominal Impedance of the 4 Ohms means that the Sonus faber Vox is a difficult to drive speaker from nominal Impedance perspective, make sure that you choose an amplifier than can provide 4 Ohms for this speaker.
Many AVRs (audio/video receiver) in the market may have difficulty when the speakers dip below the 4 Ohms levels (this may cause clipping or even physical damage), so we recommend to not pair the Sonus faber Vox with an AVR but use an Integrated Amplifier instead.
Sensitivity
90dB of the Sonus faber Vox is an average sensitivity for stereo speaker so it is neither easy nor difficult to drive Sensitivity wise. Work out how loud the Sonus faber Vox plays in your room →
Running more than one pair from a single amplifier? Check the load it would present →
What amplifier does the Sonus faber Vox need?
At normal listening levels in a medium room, about
15–240 W
per channel into 4 ohms.
Set your own conditions and we will rank every amplifier we cover.
Prefer to browse? Integrated amplifiers under $5,000, or every amplifier we cover.
Input Type
Vox has Binding post type connectors and lets bi-amping/bi-wiring. Bi-wiring can enhance the overall transparency of your loudspeakers by using separate speaker wires for the low and high-frequency drivers from a single amplifier. Bi-amping, on the other hand, involves using separate amplifiers for the high and low-frequency drivers, potentially resulting in a greater dynamic range and reduced distortion.
Work out what gauge speaker cable this run needs →
Sonus faber Vox External Dimensions and Weight
Sonus faber Vox has external dimensions of (Height x Width x Depth) 12-3/8 x 32-15/16 x 15-3/16inch (315.0 x 836.0 x 385.0mm ).
Base Surface Area
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base area of Sonus faber Vox is approximately 3218.6cm2 / 498.9inch2.
Find speakers that fit your shelf or alcove →
WeightThe Sonus faber Vox weighs 37.00kg / 81.4lbs per piece. Here is a comparison of how Vox's weight compares with the average, max and min weights in its class.
Weight
All Center Channel Speakers
Weight
Center Channel Speakers under $5000
Cabinet type and Materials
Sonus faber Vox has a
Bass Reflex type cabinet. Bass Reflex type loudspeakers (aka Ported, Vented or Reflex Port) have enclosures that uses a port, hole or vent cut into the cabinet. Ported designs are generally more efficient than the Sealed designs.
Does the Sonus faber Vox come with a Grille?
Vox comes with grilles. The purpose of the grille is to protect the delicate driver elements from external impacts while still allowing the sound to pass as clearly as possible.
Recommended Accessories
Here is a list of accessories that we think you may need for the Sonus faber Vox.
Official Product Page
Official manufacturer's product page for the Sonus faber Vox speaker can be found below:
Official Product Page for Sonus faber Vox