In this review, we will be comparing Sonetto III and Sonus faber Sonetto III G2, two Passive Floor-standing speakers by Sonus faber
Let's have a brief look at the main features
of Sonus Sonetto III and Sonus faber Sonetto III G2 first before getting into our more
detailed comparison.
Sonus Sonetto III Key Specs
- 3-way Design
- 1.15" high definition DAD Dome Tweeter
- 6" Midrange
- 2 x 6" aluminum cone Woofer
- 42-25k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-250watts
- Weight:16.00kg
- Dimensions (H x W x D): 40" x 9" x 12" ( 1018.0 x 219.0 x 305.0mm )
Sonus faber Sonetto III G2 Key Specs
- 2-way Design
- 1.1" Soft-dome Tweeter
- 2 x 6.5" Paper Pulp Woofer
- 38-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-280watts
- Weight:25.85kg
- Dimensions (H x W x D): 42-1/16" x 11-5/16" x 14-5/16" ( 1069.0 x 288.0 x 364.0mm )
Sonetto III and Sonus faber Sonetto III G2 are members of Sonus faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Sonetto Series
History
In the following sections, we will get into more detail in order to better understand how the Sonus Sonetto III and Sonus faber Sonetto III G2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Sonetto III is a 3-way design whereas the Sonus faber Sonetto III G2 is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Sonus Sonetto III |
Sonus faber Sonetto III G2 |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.15-inch
|
1.1-inch
|
|
Midrange
|
1 x 6-inch |
- |
|
Woofer
|
2 x 6-inch
|
2 x 6.5-inch
|
Sonetto III features a 1.15" high definition DAD Dome Tweeter , a 6" Midrange and 2 x 6" aluminum cone Woofer with a Crossover frequency at 220 and 3.250 Hz. On the other hand, the Sonus faber Sonetto III G2 features a 1.1" Soft-dome Tweeter and 2 x 6.5" Paper Pulp Woofer .
Frequency Response
Sonetto III has a frequency range of 42-25k Hz whereas Sonus faber Sonetto III G2 has a frequency range of 38-40k Hz. With a minimum frequency of 38Hz, the Sonus faber Sonetto III G2 can go slightly deeper then the Sonetto III's min frequency of 42Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Sonus faber Sonetto III G2
High Frequency
Floor-standing Speakers
Sonus faber Sonetto III G2
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto III and Sonus faber Sonetto III G2 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonetto III sensitivity is rated at 89 dB and the Sonus faber Sonetto III G2's is at 88 dB. This 1 dB difference makes the Sonus Sonetto III a more sensitive speaker compared to Sonus faber Sonetto III G2, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto III and the Sonetto III can provide this impedance level.
Sensitivity
Floor-standing Speakers
Sonus faber Sonetto III G2
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Sonetto III can handle a max power of 280 watts RMS from the amp the whereas Sonetto III has a max power handling value of 250 watts RMS , 30 watts less than the Sonus faber Sonetto III G2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Sonetto III and Sonus faber Sonetto III G2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Sonus Sonetto III's Binding post terminals allows Bi-amping or bi-wiring
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Sonetto III's and Sonus faber Sonetto III G2's external dimensions. Sonus Sonetto III has external dimensions of 1018.0 x 219.0 x 305.0mm ( 40 x 9 x 12inch) whereas Sonus faber Sonetto III G2 has external dimensions of 1069.0 x 288.0 x 364.0mm ( 42-1/16inch x 11-5/16inch x 14-5/16inch ) .
Sonus faber Sonetto III G2 is clearly the larger of the two speakers. Its body is 69mm wider, 51mm taller and 59mm deeper than Sonus Sonetto III.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Sonetto III is approximately 668.0cm2 / 103.5inch2 and base area of the Sonus faber Sonetto III G2 is approximately 1048.3cm2 / 162.5inch2. The Sonetto III requires 36% less surface area than the Sonus faber Sonetto III G2 which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Sonus Sonetto III weighs 16.00kg / 35.2lbs and the Sonus faber Sonetto III G2 weighs 25.85kg / 56.9lbs. This makes the Sonus faber Sonetto III G2 62% heavier than the Sonetto III.
Here is a comparison of how Sonetto III and Sonus faber Sonetto III G2's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
Sonus faber Sonetto III G2
What's in the Box of Sonus Sonetto III?
Here are the items that are included inside the box of Sonetto III:
- 8 Spikes
- 8 Under Spikes
- 8 Spike locks
- 2 Masks
- 2 Fabric dust guards
- 2 Basis
- 16 Locking screws
- 2 Jumpers
- 1 Allen Wrench
- 1 Manual
What's in the Box of Sonus faber Sonetto III G2?
Here are the items that come with the Sonus faber Sonetto III G2:
- 2 Floorstanding loudspeakers
- 6 Grilles
- 4 Jumper-straps (pre-installed)
- 2 Binding-post covers (pre-installed)
- 8 Rubber feet
- 8 Spikes 8 Protective discs
- 8 Locking washers
- Wrench
- Dust cloth
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
89 dB
vs
88 dB
|
Play louder with same amount of amplification power |
 Height |
1018mm
vs
1069mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
668cm2
vs
1048cm2
|
Takes less floor space |
 Max Input Power |
280 watts
vs
250 watts
|
Handle more power from your amplifier |
 Woofer Size |
6.5 inches
vs
6 inches
|
Larger woofer |
|
Low Frequency Response |
38 Hz
vs
42 Hz
|
Generates deeper bass |
 High Frequency Response |
40k Hz
vs
25k Hz
|
Generates higher frequency |
| General |
Sonus Faber Sonetto III |
Sonus faber Sonetto III G2 |
| Brand |
Sonus faber |
Sonus faber |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-250 watts |
50-280 watts |
| Sensitivity |
89 dB |
88 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
42-25k Hz |
38-40k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
6.5" |
| Woofer Composition |
aluminum cone |
Paper Pulp |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1.15" |
1.1" |
| Tweeter Type |
high definition DAD Dome |
Soft-dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
No |
| Crossover Frequency |
220 and 3.250 Hz |
n/a |
| Firing Direction |
bottom |
n/a |
Physical Specs |
|
|
| Height |
1018.0mm (40.1") |
1069.0mm (42.1") |
| Width |
219.0mm (8.6") |
288.0mm (11.3") |
| Depth |
305.0mm (12") |
364.0mm (14.3") |
| Weight |
16.00kg (35.2lbs) |
25.85kg (56.9lbs) |
| Enclosure |
Bass Reflex |
|
| Finish |
n/a |
Wood/Leather/Concrete |
| Available Colors |
Wood, White, Black, Wenge |
Wenge |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
|
2 Yrs (8 Yrs registered) |
| Labor Warranty |
|
2 Yrs (8 Yrs registered) |