In this review, we will be comparing two different type of speakers by Sonus Faber. Sonus Faber Sonetto III is a Floor-standing speaker whereas the Sonetto CII is a Center Channel speaker.
Let's have a brief look at the main features
of Sonus Sonetto III and Sonus Sonetto Center II first before getting into our more
detailed comparison.
Sonus Sonetto III Key Specs
- 3-way Design
- 1.15" high definition DAD Dome Tweeter
- 6" Midrange
- 2 x 6" aluminum cone Woofer
- 42-25k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-250watts
- Weight:16.00kg
- Dimensions (H x W x D): 1018.0" x 9" x 12"( 1018.0 x 219.0 x 305.0mm )
Sonus Sonetto Center II Key Specs
- 3-way Design
- 1.15" high definition DAD Dome Tweeter
- 6" Midrange
- 2 x 6" aluminum cone Woofer
- 6" Midrange
- 42-25k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:16.20kg
- Dimensions (H x W x D): 289.0" x 30" x 16"( 289.0 x 743.0 x 409.0mm )
Sonetto III and Sonetto CII are members of Sonus Faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus Faber Sonetto Series History
What size room are the Sonus Sonetto III and Sonus Sonetto Center II speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Sonus Sonetto III |
Sonus Sonetto Center II |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus Sonetto III and Sonus Sonetto Center II compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Sonetto III and Sonetto CII are 3-way speakers.
| Driver |
Sonus Sonetto III |
Sonus Sonetto Center II |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.15-inch
|
1.15-inch
|
|
Midrange
|
1 x 6-inch |
2 x 6-inch |
|
Woofer
|
2 x 6-inch
|
2 x 6-inch
|
Sonetto III features a 1.15" high definition DAD Dome Tweeter , a 6" Midrange and 2 x 6" aluminum cone Woofer with a Crossover frequency at 220 and 3.250 Hz. On the other hand, the Sonetto CII features a 1.15" high definition DAD Dome Tweeter , a 6" Midrange and 2 x 6" aluminum cone Woofer with a Crossover frequency at 1.650 Hz.
Frequency Response
Sonetto III and Sonetto CII has exactly the same frequency range of 42-25k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto III and Sonetto CII have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonetto III sensitivity is rated at 89 dB and the Sonetto CII's is at 91 dB. This 2 dB difference makes the Sonus Sonetto Center II a more sensitive speaker compared to Sonus Sonetto III, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto III and the Sonetto III can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Sonetto III can handle a max power of 300 watts RMS from the amp the whereas Sonetto III has a max power handling value of 250 watts RMS , 50 watts less than the Sonetto CII.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Sonetto III and Sonetto CII features dual binding post speaker terminals for bi-amping or bi-wiring.
Sonus Sonetto III's Binding post terminals allows Bi-amping or bi-wiring
Sonus Sonetto Center II's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Sonetto III has a bottom firing port whereas Sonetto CII has a rear firing ports. Sonus Sonetto III's bottom-firing port gives more flexibility in placement in regards to proximity to walls compared to Sonus Sonetto Center II with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Sonetto III's and Sonus Sonetto Center II's external dimensions. Sonus Sonetto III has external dimensions of 1018.0 x 219.0 x 305.0mm ( 40 x 9 x 12inch) whereas Sonus Sonetto Center II has external dimensions of 289.0 x 743.0 x 409.0mm ( 12 x 30 x 16inch) .
Sonus Sonetto III is 524mm narrower and 104mm less deeper than Sonus Sonetto Center II but it is also 729mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Sonetto III is approximately 668.0cm2 / 103.5inch2 and base area of the Sonus Sonetto Center II is approximately 3038.9cm2 / 471.0inch2. The Sonetto III requires 78% less surface area than the Sonetto CII which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus Sonetto III?
Here are the items that are included inside the box of Sonetto III:
8 Spikes8 Under Spikes8 Spike locks2 Masks2 Fabric dust guards2 Basis16 Locking screws2 Jumpers1 Allen Wrench1 Manual
What's in the Box of Sonus Sonetto Center II?
Here are the items that come with the Sonetto CII:
1 Masks1 Fabric dust guards1 Basis2 Jumpers1 Manual
Base Surface Area 
Max Input Power 
Sensitivity 
Height