In this review, we will be comparing two different type of speakers by Sonus faber. Sonus Faber Sonetto I is a Bookshelf speaker whereas the Sonus faber Sonetto III G2 is a Floor-standing speaker.
Let's have a brief look at the main features
of Sonus Sonetto I and Sonus faber Sonetto III G2 first before getting into our more
detailed comparison.
Sonus Sonetto I Key Specs
- 2-way Design
- 1.15" high definition DAD Dome Tweeter
- 6" cellulose pulp and other natural fibers Woofer
- 45-25k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-150watts
- Weight:5.50kg
- Dimensions (H x W x D): 14" x 9" x 12" ( 359.0 x 219.0 x 305.0mm )
Sonus faber Sonetto III G2 Key Specs
- 2-way Design
- 1.1" Soft-dome Tweeter
- 2 x 6.5" Paper Pulp Woofer
- 38-40k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-280watts
- Weight:25.85kg
- Dimensions (H x W x D): 42-1/16" x 11-5/16" x 14-5/16" ( 1069.0 x 288.0 x 364.0mm )
Sonetto I and Sonus faber Sonetto III G2 are members of Sonus faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus faber Sonetto Series
History
In the following sections, we will get into more detail in order to better understand how the Sonus Sonetto I and Sonus faber Sonetto III G2 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Sonetto I and Sonus faber Sonetto III G2 are 2-way speakers.
| Driver |
Sonus Sonetto I |
Sonus faber Sonetto III G2 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.15-inch
|
1.1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
2 x 6.5-inch
|
Sonetto I features a 1.15" high definition DAD Dome Tweeter and 1 x 6" cellulose pulp and other natural fibers Woofer with a Crossover frequency at 2500 Hz. On the other hand, the Sonus faber Sonetto III G2 features a 1.1" Soft-dome Tweeter and 2 x 6.5" Paper Pulp Woofer .
Frequency Response
Sonetto I has a frequency range of 45-25k Hz whereas Sonus faber Sonetto III G2 has a frequency range of 38-40k Hz. With a minimum frequency of 38Hz, the Sonus faber Sonetto III G2 can go significantly deeper on the low side and provide stronger bass compared to the Sonetto I's min frequency of 45Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Sonus faber Sonetto III G2
High Frequency
Bookshelf Speakers
Sonus faber Sonetto III G2
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto I and Sonus faber Sonetto III G2 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonetto I sensitivity is rated at 87 dB and the Sonus faber Sonetto III G2's is at 88 dB. This 1 dB difference makes the Sonus faber Sonetto III G2 a more sensitive speaker compared to Sonus Sonetto I, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto I and the Sonetto I can provide this impedance level.
Sensitivity
Bookshelf Speakers
Sonus faber Sonetto III G2
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Sonetto I can handle a max power of 280 watts RMS from the amp the whereas Sonetto I has a max power handling value of 150 watts RMS , 130 watts less than the Sonus faber Sonetto III G2.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Sonetto I and Sonus faber Sonetto III G2 features dual binding post speaker terminals for bi-amping or bi-wiring.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Sonetto I's and Sonus faber Sonetto III G2's external dimensions. Sonus Sonetto I has external dimensions of 359.0 x 219.0 x 305.0mm ( 14 x 9 x 12inch) whereas Sonus faber Sonetto III G2 has external dimensions of 1069.0 x 288.0 x 364.0mm ( 42-1/16inch x 11-5/16inch x 14-5/16inch ) .
Sonus faber Sonetto III G2 is clearly the larger of the two speakers. Its body is 69mm wider, 710mm taller and 59mm deeper than Sonus Sonetto I.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Sonetto I is approximately 668.0cm2 / 103.5inch2 and base area of the Sonus faber Sonetto III G2 is approximately 1048.3cm2 / 162.5inch2. The Sonetto I requires 36% less surface area than the Sonus faber Sonetto III G2 which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus Sonetto I?
Here are the items that are included inside the box of Sonetto I:
- 2 Masks
- 2 Fabric dust guards
- 2 Jumpers
- 1 Manual
What's in the Box of Sonus faber Sonetto III G2?
Here are the items that come with the Sonus faber Sonetto III G2:
- 2 Floorstanding loudspeakers
- 6 Grilles
- 4 Jumper-straps (pre-installed)
- 2 Binding-post covers (pre-installed)
- 8 Rubber feet
- 8 Spikes 8 Protective discs
- 8 Locking washers
- Wrench
- Dust cloth