In this review, we will be comparing two different type of speakers by Sonus Faber. Sonus Faber Sonetto I is a Bookshelf speaker whereas the Sonetto CI is a Center Channel speaker.
Let's have a brief look at the main features
of Sonus Sonetto I and Sonus Sonetto Center I first before getting into our more
detailed comparison.
Sonetto I and Sonetto CI are members of Sonus Faber's Sonetto series of speakers. Below you can find the loudspeakers from this series.
Sonus Faber Sonetto Series History
What size room are the Sonus Sonetto I and Sonus Sonetto Center I speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Sonus Sonetto I and Sonus Sonetto Center I compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Sonetto I and Sonetto CI are 2-way speakers.
| Driver |
Sonus Sonetto I |
Sonus Sonetto Center I |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.15-inch
|
1.15-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 6-inch
|
2 x 6-inch
|
Sonetto I features a 1.15" high definition DAD Dome Tweeter and 1 x 6" cellulose pulp and other natural fibers Woofer with a Crossover frequency at 2500 Hz. On the other hand, the Sonetto CI features a 1.15" high definition DAD Dome Tweeter and 2 x 6" aluminum cone Woofer with a Crossover frequency at 1.550 Hz.
Frequency Response
Sonetto I has a frequency range of 45-25k Hz whereas Sonetto CI has a frequency range of 60-25k Hz. With a minimum frequency of 45Hz, the Sonetto I can go significantly deeper on the low side and provide stronger bass compared to the Sonetto CI's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Sonetto I and Sonetto CI have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Sonetto I sensitivity is rated at 87 dB and the Sonetto CI's is at 90 dB. This 3 dB difference makes the Sonus Sonetto Center I a more sensitive speaker compared to Sonus Sonetto I, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Sonetto I and the Sonetto I can provide this impedance level.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Sonetto I can handle a max power of 200 watts RMS from the amp the whereas Sonetto I has a max power handling value of 150 watts RMS , 50 watts less than the Sonetto CI.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Sonetto I and Sonetto CI features dual binding post speaker terminals for bi-amping or bi-wiring.
Sonus Sonetto Center I's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Sonetto I has a front firing port whereas Sonetto CI has a rear firing ports. Sonus Sonetto I's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Sonus Sonetto Center I with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Sonetto I's and Sonus Sonetto Center I's external dimensions. Sonus Sonetto I has external dimensions of 359.0 x 219.0 x 305.0mm ( 14 x 9 x 12inch) whereas Sonus Sonetto Center I has external dimensions of 242.0 x 495.0 x 303.0mm ( 10 x 20 x 12inch) .
Sonus Sonetto Center I is 117mm shorter and 2mm less deeper than Sonus Sonetto I but it is also 276mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Sonetto I is approximately 668.0cm2 / 103.5inch2 and base area of the Sonus Sonetto Center I is approximately 1499.9cm2 / 232.5inch2. The Sonetto I requires 55% less surface area than the Sonetto CI which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus Sonetto I?
Here are the items that are included inside the box of Sonetto I:
2 Masks2 Fabric dust guards2 Jumpers1 Manual
What's in the Box of Sonus Sonetto Center I?
Here are the items that come with the Sonetto CI:
1 Masks1 Fabric dust guards1 Basis2 Jumpers1 Manual