In this review, we will be comparing two different type of speakers by Sonus Faber. Sonus Faber Lumina V is a Floor-standing speaker whereas the Lumina CI is a Center Channel speaker.
Let's have a brief look at the main features
of Sonus Lumina V and Sonus Lumina Center I first before getting into our more
detailed comparison.
Sonus Lumina V Key Specs
- 3-way Design
- 1.15" high definition DAD Tweeter
- 6" Midrange
- 2 x 6.5" paper cone Woofer
- 38-24k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:22.50kg
- Dimensions (H x W x D): 1049.0" x 11" x 14.7"( 1049.0 x 280.0 x 373.0mm )
Sonus Lumina Center I Key Specs
- 2-way Design
- 1.15" high definition DAD Tweeter
- 2 x 4.75" paper cone Woofer
- 65-24k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-100watts
- Weight:7.60kg
- Dimensions (H x W x D): 169.0" x 20.6" x 8.4"( 169.0 x 524.0 x 213.0mm )
Lumina V and Lumina CI are members of Sonus Faber's Lumina series of speakers. Below you can find the loudspeakers from this series.
Sonus Faber Lumina Series History
What size room are the Sonus Lumina V and Sonus Lumina Center I speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Sonus Lumina V |
Sonus Lumina Center I |
| Near-field |
Bad |
Average |
| Small Room |
Poor |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Poor |
| Very Large Room |
Average |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus Lumina V and Sonus Lumina Center I compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Lumina V is a 3-way design whereas the Lumina CI is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Sonus Lumina V |
Sonus Lumina Center I |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.15-inch
|
1.15-inch
|
|
Midrange
|
1 x 6-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 4.75-inch
|
Lumina V features a 1.15" high definition DAD Tweeter , a 6" Midrange and 2 x 6.5" paper cone Woofer with a Crossover frequency at 260 and 2600 Hz. On the other hand, the Lumina CI features a 1.15" high definition DAD Tweeter and 2 x 4.75" paper cone Woofer with a Crossover frequency at 2000 Hz.
Frequency Response
Lumina V has a frequency range of 38-24k Hz whereas Lumina CI has a frequency range of 65-24k Hz. With a minimum frequency of 38Hz, the Lumina V can go significantly deeper on the low side and provide stronger bass compared to the Lumina CI's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Lumina V and Lumina CI have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Lumina V sensitivity is rated at 90 dB and the Lumina CI's is at 87 dB. This 3 dB difference makes the Sonus Lumina V a more sensitive speaker compared to Sonus Lumina Center I, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Lumina V and the Lumina V can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Lumina V can handle a max power of 300 watts RMS from the amp the whereas Lumina CI has a max power handling value of 100 watts RMS, 200 watts less than the Lumina V.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Lumina V and Lumina CI features dual binding post speaker terminals for bi-amping or bi-wiring.
Sonus Lumina Center I's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Lumina V has a bottom firing port whereas Lumina CI has a front firing ports. Sonus Lumina Center I's front-firing port gives more flexibility in placement in regards to proximity to walls compared to Sonus Lumina V with its rear-firing port.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Lumina V's and Sonus Lumina Center I's external dimensions. Sonus Lumina V has external dimensions of 1049.0 x 280.0 x 373.0mm ( 41.3 x 11 x 14.7inch) whereas Sonus Lumina Center I has external dimensions of 169.0 x 524.0 x 213.0mm ( 6.6 x 20.6 x 8.4inch) .
Sonus Lumina Center I is 880mm shorter and 160mm less deeper than Sonus Lumina V but it is also 244mm wider.
Below you can see the front view size comparison of Sonus Lumina V and Sonus Lumina Center I in scale.
Comparison image of Sonus Lumina V and Sonus Lumina Center I Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Lumina V is approximately 1044.4cm2 / 161.9inch2 and base area of the Sonus Lumina Center I is approximately 1116.1cm2 / 173.0inch2. The Lumina V requires 6% less surface area than the Lumina CI which gives it a small advantage on placement in tight spaces.
What's in the Box of Sonus Lumina V?
Here are the items that are included inside the box of Lumina V:
Floorstanding loudspeaker1 Manual 2 Jumpers2 Grilles 2 Fabric dust guards4 Spikes 4 Under spikes 4 Spikes locks
What's in the Box of Sonus Lumina Center I?
Here are the items that come with the Lumina CI:
1 Center Channel Speaker1 Manual 2 Jumpers1 Grilles 1 Fabric dust guards
Max Input Power 
Driver Setup 
Sensitivity 
Woofer Size 
Base Surface Area 
Height 
Price per pair*