In this review, we will be comparing two different type of speakers by Sonus Faber. Sonus Faber Lumina Center I is a Center Channel speaker whereas the Lumina I is a Bookshelf speaker.
Let's have a brief look at the main features
of Sonus Lumina Center I and Sonus Lumina I first before getting into our more
detailed comparison.
Sonus Lumina Center I Key Specs
- 2-way Design
- 1.15" high definition DAD Tweeter
- 2 x 4.75" paper cone Woofer
- 65-24k Hz Frequency Response
- 87 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-100watts
- Weight:7.60kg
- Dimensions (H x W x D): 169.0" x 20.6" x 8.4"( 169.0 x 524.0 x 213.0mm )
Sonus Lumina I Key Specs
- 2-way Design
- 1.15" high definition DAD Tweeter
- 4.75" paper cone Woofer
- 65-24k Hz Frequency Response
- 88 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-100watts
- Weight:4.40kg
- Dimensions (H x W x D): 280.0" x 5.8" x 8.4"( 280.0 x 148.0 x 213.0mm )
Lumina CI and Lumina I are members of Sonus Faber's Lumina series of speakers. Below you can find the loudspeakers from this series.
Sonus Faber Lumina Series History
What size room are the Sonus Lumina Center I and Sonus Lumina I speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Sonus Lumina Center I |
Sonus Lumina I |
| Near-field |
Average |
Average |
| Small Room |
Good |
Good |
| Mid-size Room |
Average |
Average |
| Large Room |
Poor |
Poor |
| Very Large Room |
Bad |
Bad |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus Lumina Center I and Sonus Lumina I compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Lumina CI and Lumina I are 2-way speakers.
| Driver |
Sonus Lumina Center I |
Sonus Lumina I |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.15-inch
|
1.15-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 4.75-inch
|
1 x 4.75-inch
|
Lumina CI features a 1.15" high definition DAD Tweeter and 2 x 4.75" paper cone Woofer with a Crossover frequency at 2000 Hz. On the other hand, the Lumina I features a 1.15" high definition DAD Tweeter and 1 x 4.75" paper cone Woofer with a Crossover frequency at 2000Hz.
Frequency Response
Lumina CI and Lumina I has exactly the same frequency range of 65-24k Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Lumina CI and Lumina I have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Lumina CI sensitivity is rated at 87 dB and the Lumina I's is at 88 dB. This 3 dB difference makes the Sonus Lumina Center I a more sensitive speaker compared to Sonus Lumina I, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Lumina CI and the Lumina CI can provide this impedance level.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Lumina CI and Lumina I has the same power range of 30-100 watts.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Lumina CI and Lumina I features dual binding post speaker terminals for bi-amping or bi-wiring.
Sonus Lumina Center I's Binding post terminals allows Bi-amping or bi-wiring
Sonus Lumina I's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Lumina CI and Lumina I have front firing ports. front ported speakers offers more flexibility in placement in regards to proximity to walls&surfaces compared to rear ported speakers.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Lumina Center I's and Sonus Lumina I's external dimensions. Sonus Lumina Center I has external dimensions of 169.0 x 524.0 x 213.0mm ( 6.6 x 20.6 x 8.4inch) whereas Sonus Lumina I has external dimensions of 280.0 x 148.0 x 213.0mm ( 11 x 5.8 x 8.4inch) .
Below you can see the front view size comparison of Sonus Lumina Center I and Sonus Lumina I in scale.
Comparison image of Sonus Lumina Center I and Sonus Lumina I Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Lumina Center I is approximately 1116.1cm2 / 173.0inch2 and base area of the Sonus Lumina I is approximately 315.2cm2 / 48.9inch2. The Lumina CI requires 254% more surface area than the Lumina I which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Sonus Lumina Center I?
Here are the items that are included inside the box of Lumina CI:
1 Center Channel Speaker1 Manual 2 Jumpers1 Grilles 1 Fabric dust guards
What's in the Box of Sonus Lumina I?
Here are the items that come with the Lumina I:
2 Bookshelf loudspeakers1 Manual 2 Jumpers2 Grilles 2 Fabric dust guards
Sensitivity 
Number of Woofers 
Height 
Price per pair* 
Base Surface Area