In this review, we will be comparing Lumina III and Lumina V, two Passive Floor-standing speakers by Sonus Faber
Let's have a brief look at the main features
of Sonus Lumina III and Sonus Lumina V first before getting into our more
detailed comparison.
Sonus Lumina III Key Specs
- 3-way Design
- 1.15" high definition DAD Tweeter
- 6" Midrange
- 2 x 6" paper cone Woofer
- 40-24k Hz Frequency Response
- 89 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-250watts
- Weight:15.90kg
- Dimensions (H x W x D): 989.0" x 9" x 10.9"( 989.0 x 228.0 x 278.0mm )
Sonus Lumina V Key Specs
- 3-way Design
- 1.15" high definition DAD Tweeter
- 6" Midrange
- 2 x 6.5" paper cone Woofer
- 6" Midrange
- 38-24k Hz Frequency Response
- 90 dB Sensitivity
- Impedance: 4ohms
- Power Range:50-300watts
- Weight:22.50kg
- Dimensions (H x W x D): 1049.0" x 11" x 14.7"( 1049.0 x 280.0 x 373.0mm )
Lumina III and Lumina V are members of Sonus Faber's Lumina series of speakers. Below you can find the loudspeakers from this series.
Sonus Faber Lumina Series
History
What size room are the Sonus Lumina III and Sonus Lumina V speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Sonus Lumina III |
Sonus Lumina V |
| Near-field |
Bad |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Average |
| Large Room |
Good |
Good |
| Very Large Room |
Average |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Sonus Lumina III and Sonus Lumina V compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Lumina III and Lumina V are 3-way speakers.
| Driver |
Sonus Lumina III |
Sonus Lumina V |
|
Driver Setup
|
3-way
|
3-way
|
|
Tweeter
|
1.15-inch
|
1.15-inch
|
|
Midrange
|
1 x 6-inch |
1 x 6-inch |
|
Woofer
|
2 x 6-inch
|
2 x 6.5-inch
|
Lumina III features a 1.15" high definition DAD Tweeter , a 6" Midrange and 2 x 6" paper cone Woofer with a Crossover frequency at 350 and 3500 Hz. On the other hand, the Lumina V features a 1.15" high definition DAD Tweeter , a 6" Midrange and 2 x 6.5" paper cone Woofer with a Crossover frequency at 260 and 2600 Hz.
Frequency Response
Lumina III has a frequency range of 40-24k Hz whereas Lumina V has a frequency range of 38-24k Hz. With a minimum frequency of 38Hz, the Lumina V can go slightly deeper then the Lumina III's min frequency of 40Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Lumina III and Lumina V have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Lumina III sensitivity is rated at 89 dB and the Lumina V's is at 90 dB. This 1 dB difference makes the Sonus Lumina V a more sensitive speaker compared to Sonus Lumina III, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Lumina III and the Lumina III can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
Lumina III can handle a max power of 300 watts RMS from the amp the whereas Lumina III has a max power handling value of 250 watts RMS , 50 watts less than the Lumina V.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both Lumina III and Lumina V features dual binding post speaker terminals for bi-amping or bi-wiring.
Cabinet Type and Port Position
Both Lumina III and Lumina V have bottom firing ports.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Sonus Lumina III's and Sonus Lumina V's external dimensions. Sonus Lumina III has external dimensions of 989.0 x 228.0 x 278.0mm ( 38.9 x 9 x 10.9inch) whereas Sonus Lumina V has external dimensions of 1049.0 x 280.0 x 373.0mm ( 41.3 x 11 x 14.7inch) .
Sonus Lumina V is clearly the larger of the two speakers. Its body is 52mm wider, 60mm taller and 95mm deeper than Sonus Lumina III.
Below you can see the front view size comparison of Sonus Lumina III and Sonus Lumina V in scale.
Comparison image of Sonus Lumina III and Sonus Lumina V Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Sonus Lumina III is approximately 633.8cm2 / 98.2inch2 and base area of the Sonus Lumina V is approximately 1044.4cm2 / 161.9inch2. The Lumina III requires 39% less surface area than the Lumina V which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Sonus Lumina III weighs 15.90kg / 35lbs and the Sonus Lumina V weighs 22.50kg / 49.5lbs. This makes the Lumina V 42% heavier than the Lumina III.
Here is a comparison of how Lumina III and Lumina V's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Sonus Lumina III?
Here are the items that are included inside the box of Lumina III:
Floorstanding loudspeaker1 Manual 2 Jumpers2 Grilles 2 Fabric dust guards4 Spikes 4 Under spikes 4 Spikes locks
What's in the Box of Sonus Lumina V?
Here are the items that come with the Lumina V:
Floorstanding loudspeaker1 Manual 2 Jumpers2 Grilles 2 Fabric dust guards4 Spikes 4 Under spikes 4 Spikes locks
 Height |
989mm
vs
1049mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
633cm2
vs
1044cm2
|
Takes less floor space |
 Price per pair* |
2199USD
vs
2799USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
300 watts
vs
250 watts
|
Handle more power from your amplifier |
 Sensitivity |
90 dB
vs
89 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
6 inches
|
Larger woofer |
|
Low Frequency Response |
38 Hz
vs
40 Hz
|
Generates deeper bass |
| General |
Sonus Faber Lumina III |
Sonus Faber Lumina V |
| Brand |
Sonus Faber |
Sonus Faber |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
50-250 watts |
50-300 watts |
| Sensitivity |
89 dB |
90 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
40-24k Hz |
38-24k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6" |
6.5" |
| Woofer Composition |
paper cone |
paper cone |
| Tweeter Size |
1.15" |
1.15" |
| Tweeter Type |
high definition DAD |
high definition DAD |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6" |
6" |
| Crossover Frequency |
350 and 3500 Hz |
260 and 2600 Hz |
| Firing Direction |
bottom |
bottom |
Physical Specs |
|
|
| Height |
989.0mm (38.9") |
1049.0mm (41.3") |
| Width |
228.0mm (9") |
280.0mm (11") |
| Depth |
278.0mm (10.9") |
373.0mm (14.7") |
| Weight |
15.90kg (35lbs) |
22.50kg (49.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
real multilayer wood |
real multilayer wood |
| Available Colors |
Black, Wenge, Walnut |
Black, Wenge, Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
|
|
| Labor Warranty |
|
|