In this review, we will be comparing M105 and M106, two Passive Bookshelf speakers by Revel
Let's have a brief look at the main features
of Revel M105 and Revel M106 first before getting into our more
detailed comparison.
Revel M105 Key Specs
- 2-way Design
- 1" Hard-Dome with Acoustic Lens Waveguide Tweeter
- 5.25" Aluminum Woofer
- 60Hz- 20kHz Frequency Response
- 86 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-120watts
- Weight:7.14kg
- Dimensions (H x W x D): 359.0" x 7-15/16" x 9-7/8"( 359.0 x 202.0 x 251.0mm )
Revel M106 Key Specs
- 2-way Design
- 1" Hard-Dome with Acoustic Lens Waveguide Tweeter
- 6.5" Aluminum Woofer
- 59Hz- 20kHz Frequency Response
- 87 dB Sensitivity
- Impedance: 8ohms
- Power Range:50-150watts
- Weight:8.41kg
- Dimensions (H x W x D): 383.0" x 8-1/4" x 11"( 383.0 x 210.0 x 280.0mm )
M105 and M106 are members of Revel's Performa3 series of speakers. Below you can find the loudspeakers from this series.
Revel Performa3 Series
History
What size room are the Revel M105 and Revel M106 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Revel M105 |
Revel M106 |
| Near-field |
Poor |
Poor |
| Small Room |
Average |
Average |
| Mid-size Room |
Good |
Good |
| Large Room |
Average |
Average |
| Very Large Room |
Poor |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Revel M105 and Revel M106 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both M105 and M106 are 2-way speakers.
| Driver |
Revel M105 |
Revel M106 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
1 x 5.25-inch
|
1 x 6.5-inch
|
M105 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 2300Hz. On the other hand, the M106 features a 1" aluminum Hard-Dome with Acoustic Lens Waveguide Tweeter and 1 x 6.5" Aluminum Woofer with a Crossover frequency at 2300Hz.
Frequency Response
M105 has a frequency range of 60Hz- 20kHz whereas M106 has a frequency range of 59Hz- 20kHz. With a minimum frequency of 59Hz, the M106 can go slightly deeper then the M105's min frequency of 60Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
M105 and M106 have the same Impedance of 8 ohms but where they differ is the sensitivity levels. M105 sensitivity is rated at 86 dB and the M106's is at 87 dB. This 1 dB difference makes the Revel M106 a more sensitive speaker compared to Revel M105, hence will play louder with the same amount of watts.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using
an amplifier within this range ensures the nominal performance , inputting a power that is higher than the
max wattage can result in a damaged speaker.
M105 can handle a max power of 150 watts RMS from the amp the whereas M105 has a max power handling value of 120 watts RMS , 30 watts less than the M106.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
M105 features Binding post type posts and M106 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Revel M105's Binding post terminals
Revel M106's Binding post terminals
Cabinet Type and Port Position
Both M105 and M106 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Revel M105's and Revel M106's external dimensions. Revel M105 has external dimensions of 359.0 x 202.0 x 251.0mm ( 14-1/8 x 7-15/16 x 9-7/8inch) whereas Revel M106 has external dimensions of 383.0 x 210.0 x 280.0mm ( 15-1/16 x 8-1/4 x 11inch) .
Revel M106 is clearly the larger of the two speakers. Its body is 8mm wider, 24mm taller and 29mm deeper than Revel M105.
Below you can see the front view size comparison of Revel M105 and Revel M106 in scale.
Comparison image of Revel M105 and Revel M106 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Revel M105 is approximately 507.0cm2 / 78.6inch2 and base area of the Revel M106 is approximately 588.0cm2 / 91.1inch2. The M105 requires 14% less surface area than the M106 which gives it a small advantage on placement in tight spaces.
Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:
Size Comparison image of Revel M105 and Revel M106 on a Media Console
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Revel M105 weighs 7.14kg / 15.7lbs and the Revel M106 weighs 8.41kg / 18.5lbs. This makes the M106 18% heavier than the M105.
Here is a comparison of how M105 and M106's weights compare with the average, max and min weights in Passive Bookshelf class.
Weight
All Bookshelf Speakers
What's in the Box of Revel M105?
Here are the items that are included inside the box of M105:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
What's in the Box of Revel M106?
Here are the items that come with the M106:
Bookshelf loudspeakerGrilleFoam port plugOwners Manual
 Height |
359mm
vs
383mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
507cm2
vs
588cm2
|
Takes less floor space |
 Price per pair* |
1650USD
vs
2200USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
150 watts
vs
120 watts
|
Handle more power from your amplifier |
 Sensitivity |
87 dB
vs
86 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
6.5 inches
vs
5.25 inches
|
Larger woofer |
|
Low Frequency Response |
59 Hz
vs
60 Hz
|
Generates deeper bass |
| General |
Revel Performa3 M105 |
Revel Performa3 M106 |
| Brand |
Revel |
Revel |
| Speaker Type |
Bookshelf speakers |
Bookshelf speakers |
| Power Range |
50-120 watts |
50-150 watts |
| Sensitivity |
86 dB |
87 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
60Hz- 20kHz |
59Hz- 20kHz |
Drivers |
|
|
| Woofer Quantity |
1 |
1 |
| Woofer Size |
5.25" |
6.5" |
| Woofer Composition |
Aluminum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Hard-Dome with Acoustic Lens Waveguide |
Hard-Dome with Acoustic Lens Waveguide |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2300Hz |
2300Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
359.0mm (14.1") |
383.0mm (15.1") |
| Width |
202.0mm (8") |
210.0mm (8.3") |
| Depth |
251.0mm (9.9") |
280.0mm (11") |
| Weight |
7.14kg (15.7lbs) |
8.41kg (18.5lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
Wood/Lacquer |
Wood/Lacquer |
| Available Colors |
Gloss Walnut,Piano Black,Piano White |
Gloss Walnut,Piano Black |
| Mounting Bracket |
No |
No |
| Recommended Stand Height |
24-25" |
24-25" |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |