In this review, we will be comparing two different type of speakers by Q Acoustics. Q Acoustics 5090 is a Center Channel speaker whereas the Q Acoustics 5010 is a Bookshelf speaker.
Let's have a brief look at the main features
of Q Acoustics 5090 and Q Acoustics 5010 first before getting into our more
detailed comparison.
Q Acoustics 5090 and Q Acoustics 5010 are members of Q Acoustics's 5000 series of speakers. Below you can find the loudspeakers from this series.
Q Acoustics 5000 Series History
What size room are the Q Acoustics 5090 and Q Acoustics 5010 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Q Acoustics 5090 and Q Acoustics 5010 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Q Acoustics 5090 and Q Acoustics 5010 are 2-way speakers.
| Driver |
Q Acoustics 5090 |
Q Acoustics 5010 |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 4.5-inch
|
1 x 4.5-inch
|
Q Acoustics 5090 features a 1" Soft-dome Tweeter and 2 x 4.5" Continuous Curved Cone Woofer with a Crossover frequency at 2100 Hz. On the other hand, the Q Acoustics 5010 features a 1" Soft-dome Tweeter and 1 x 4.5" Continuous Curved Cone Woofer with a Crossover frequency at 2500 Hz.
Frequency Response
Q Acoustics 5090 has a frequency range of 57-30k Hz whereas Q Acoustics 5010 has a frequency range of 56-30k Hz. With a minimum frequency of 56Hz, the Q Acoustics 5010 can go slightly deeper then the Q Acoustics 5090's min frequency of 57Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Q Acoustics 5090 and Q Acoustics 5010 have the same Impedance of 6 ohms but where they differ is the sensitivity levels. Q Acoustics 5090 sensitivity is rated at 90.5 dB and the Q Acoustics 5010's is at 86.3 dB. This 5 dB difference makes the Q Acoustics 5090 a more sensitive speaker compared to Q Acoustics 5010, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Q Acoustics 5090 can handle a max power of 150 watts RMS from the amp the whereas Q Acoustics 5010 has a max power handling value of 90 watts RMS, 60 watts less than the Q Acoustics 5090.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Q Acoustics 5090 features Binding post type posts and Q Acoustics 5010 has a Binding post type posts. None of these speakers feature bi-amping/bi-wiring.
Q Acoustics 5090's Binding post terminals
Q Acoustics 5010's Binding post terminals
Cabinet Type and Port Position
Both Q Acoustics 5090 and Q Acoustics 5010 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Q Acoustics 5090's and Q Acoustics 5010's external dimensions. Q Acoustics 5090 has external dimensions of 166.0 x 431.0 x 245.0mm ( 6-1/2inch x 16-15/16inch x 9-5/8inch ) whereas Q Acoustics 5010 has external dimensions of 266.0 x 161.0 x 266.0mm ( 10-7/16inch x 6-5/16inch x 10-7/16inch ) .
Q Acoustics 5090 is 100mm shorter and 21mm less deeper than Q Acoustics 5010 but it is also 270mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Q Acoustics 5090 is approximately 1056.0cm2 / 163.7inch2 and base area of the Q Acoustics 5010 is approximately 428.3cm2 / 66.4inch2. The Q Acoustics 5090 requires 147% more surface area than the Q Acoustics 5010 which gives it a small disadvantage on placement in tight spaces.
What's in the Box of Q Acoustics 5090?
Here are the items that are included inside the box of Q Acoustics 5090:
1x 5090 loudspeaker 1x Owners manual 2x Foam bung
What's in the Box of Q Acoustics 5010?
Here are the items that come with the Q Acoustics 5010:
2x 5010 loudspeaker 1x Owners manual 2x Foam bung