SpeakerDecision
  • SPEAKERS by TYPE
    • Passive Bookshelf Speakers
    • Passive Floor-standing Speakers
    • Passive Center Channel Speakers
    • Passive In-wall Speakers
    • All Passive Speakers
    • Powered Subwoofers
    • Powered Stereo Speakers
  • AMPLIFIERS
  • SMART FIND

Polk L200 vs Polk L100 Comparison

x
Speaker to replace
Change

Polk L200

Passive Bookshelf | 46-38k Hz

Polk Audio Legend L200
CHECK PRICE
Change
    
Polk L100

Passive Bookshelf | 57-38k Hz

Polk Audio Legend L100
CHECK PRICE
Polk L200 Polk L200
See at AMAZON
Polk L100 Polk L100
See at AMAZON
Polk L200
See at AMAZON
Polk L100
See at AMAZON
Polk L200 vs Polk L100 Speaker Comparison

In this review, we will be comparing L200 and L100, two Passive Bookshelf speakers by Polk Audio

Let's have a brief look at the main features of Polk L200 and Polk L100 first before getting into our more detailed comparison.

Polk L200 Key Specs

  • 2-way Design
  • 1" Ring Radiator Tweeter
  • 6.5" Polypropylene Woofer
  • 46-38k Hz Frequency Response
  • 85.5 dB Sensitivity
  • Impedance: 4ohms
  • Power Range:30-200watts
  • Weight:10.00kg
  • Dimensions (H x W x D): 399.0" x 8-3/8" x 13-5/16"( 399.0 x 213.0 x 339.0mm )

Polk L100 Key Specs

  • 2-way Design
  • 1" Ring Radiator Tweeter
  • 5.25" Polypropylene Woofer
  • 57-38k Hz Frequency Response
  • 85.5 dB Sensitivity
  • Impedance: 4ohms
  • Power Range:30-160watts
  • Weight:7.68kg
  • Dimensions (H x W x D): 348.0" x 7-7/8" x 11-5/16"( 348.0 x 201.0 x 288.0mm )

L200 and L100 are members of Polk Audio's Legend L series of speakers. Below you can find the loudspeakers from this series.

Polk Audio Legend L Series History
Model Body Frequency SensitivityImpedance Woofer
Polk L200
Bookshelf 46-38k Hz 85.5 dB4Ω 1 x 6.5"
Polk L600
  
Floor-standing 34-38k Hz 86 dB4Ω 2 x 7"
Polk L400
  
Center Channel 55-38k Hz 87.5 dB4Ω 2 x 6.5"
Polk L800
  
Floor-standing 32-38k Hz 87 dB4Ω 2 x 10"
Polk L100
Bookshelf 57-38k Hz 85.5 dB4Ω 1 x 5.25"

What size room are the Polk L200 and Polk L100 speakers good for?

The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:

Listening Environment* Polk L200 Polk L100
Near-field Poor Poor
Small Room Average Average
Mid-size Room Good Good
Large Room Average Average
Very Large Room Poor Poor

(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2. Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)

In the following sections, we will get into more detail in order to better understand how the Polk L200 and Polk L100 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.


**This post contains affiliate links, and I will be compensated if you make a purchase after clicking through my links. As an Amazon Associate I earn from qualifying purchases.


Drivers

Both L200 and L100 are 2-way speakers.

Driver Polk L200 Polk L100
Driver Setup 2-way 2-way
Tweeter 1-inch 1-inch
Midrange - -
Woofer 1 x 6.5-inch 1 x 5.25-inch

L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz. On the other hand, the L100 features a 1" Ring Radiator Tweeter and 1 x 5.25" Polypropylene Woofer with a Crossover frequency at 2900Hz.

Frequency Response

L200 has a frequency range of 46-38k Hz whereas L100 has a frequency range of 57-38k Hz. With a minimum frequency of 46Hz, the L200 can go significantly deeper on the low side and provide stronger bass compared to the L100's min frequency of 57Hz.

Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.

Low Frequency

Bookshelf Speakers

L200
L100
Min
Average
Max
High Frequency

Bookshelf Speakers

Polk L200
Polk L100
Min
Average
Max

None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.

Impedance and Sensitivity

L200 and L100 have the same Impedance of 4 ohms and their sensitivity is also same at 86 dB.

One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the L200 and the L200 can provide this impedance level.

Sensitivity

Bookshelf Speakers

L200
L100
Min
Average
Max

Power Range

Power range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.

L200 can handle a max power of 200 watts RMS from the amp the whereas L100 has a max power handling value of 160 watts RMS, 40 watts less than the L200.

Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters such as Impedance, sensitivity and system efficiencies.

Input Type and Bi-Amping / Bi-Wiring

L200 features Post posts which make bi-amping or bi-wiring possible. L100 has a Post which doesn't feature bi-amping/bi-wiring.

Polk L200 Terminals
Polk L200's Post terminals allows Bi-amping or bi-wiring

Polk L100Post Terminals
Polk L100's Post terminals

Cabinet Type and Port Position

Both L200 and L100 have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.

If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.

Polk L200  Port
Polk L200 Enhanced Power Port Port

Polk L100  Port
Polk L100 Enhanced Power Port Port

Physical Specs

Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk L200's and Polk L100's external dimensions. Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) whereas Polk L100 has external dimensions of 348.0 x 201.0 x 288.0mm ( 13-11/16 x 7-7/8 x 11-5/16inch) .

Polk L200 is clearly the larger of the two speakers. Its body is 12mm wider, 51mm taller and 51mm deeper than Polk L100.

Below you can see the front view size comparison of Polk L200 and Polk L100 in scale.

Polk L200 vs Polk L100 Size Comparison - Front View
Comparison image of Polk L200 and Polk L100 Size and External Dimensions

Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited. The base surface area of the Polk L200 is approximately 722.1cm2 / 111.9inch2 and base area of the Polk L100 is approximately 578.9cm2 / 89.7inch2. The L200 requires 25% more surface area than the L100 which gives it a small disadvantage on placement in tight spaces.

Here is an another comparison that shows both speakers on a BDI Octave Media Cabinet, next to a standard size amplifier and turntable in scale:

Polk L200 vs Polk L100 Size Comparison on a Media Console
Size Comparison image of Polk L200 and Polk L100 on a Media Console
Weight Comparison

The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Polk L200 weighs 10.00kg / 22lbs and the Polk L100 weighs 7.68kg / 16.9lbs. This makes the L200 30% heavier than the L100.

Here is a comparison of how L200 and L100's weights compare with the average, max and min weights in Passive Bookshelf class.

Weight
All Bookshelf Speakers
Polk L200
Polk L100
Min
Average
Max

What's in the Box of Polk L200?

Here are the items that are included inside the box of L200:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • Cleaning cloth
  • Owners Manual
  • Online Registration
  • What's in the Box of Polk L100?

    Here are the items that come with the L100:
  • 2 Bookshelf loudspeakers
  • 2 Grilles
  • Cleaning cloth
  • Owners Manual
  • Online Registration

  • Reasons to choose Polk Audio Legend L200 over Polk Audio Legend L100
    Max Input Power 200 watts vs 160 watts Handle more power from your amplifier
    Woofer Size 6.5 inches vs 5.25 inches Larger woofer
    Low Frequency Response 46 Hz vs 57 Hz Generates deeper bass
    Bi-Amping and Bi-Wiring Yes vs No Allows bi-amping and bi-wiring connections

    Reasons to choose Polk Audio Legend L100 over Polk Audio Legend L200

    Height 348mm vs 399mm Easier to fit in smaller spaces
    Base Surface Area 578cm2 vs 722cm2 Takes less floor space
    Price per pair* 999USD vs 1499USD costs less (*prices may change depending on the seller, location and time)
    Polk L200 vs Polk L100 Specs Table
    Detailed comparison of specifications
    General Polk Audio Legend L200 Polk Audio Legend L100
    Brand Polk Audio Polk Audio
    Speaker Type Bookshelf speakers Bookshelf speakers
    Power Range 30-200 watts 30-160 watts
    Sensitivity 85.5 dB 85.5 dB
    Impedance 4 ohms 4 ohms
    Impedance 3 ohms 3 ohms
    Frequency Response 46-38k Hz 57-38k Hz
    Drivers
    Woofer Quantity 1 1
    Woofer Size 6.5" 5.25"
    Woofer Composition Polypropylene Polypropylene
    Woofer Surround Material Rubber Rubber
    Tweeter Size 1" 1"
    Tweeter Type Ring Radiator Ring Radiator
    Aimable Tweeter No No
    Midrange Driver No No
    Crossover Frequency 2600Hz 2900Hz
    Firing Direction rear rear
    Physical Specs
    Height 399.0mm (15.7") 348.0mm (13.7")
    Width 213.0mm (8.4") 201.0mm (7.9")
    Depth 339.0mm (13.3") 288.0mm (11.3")
    Weight 10.00kg (22lbs) 7.68kg (16.9lbs)
    Enclosure Bass Reflex Bass Reflex
    Finish MDF/Wood veneer MDF/Wood veneer
    Available Colors Brown Walnut, Black Ash Brown Walnut, Black Ash
    Mounting Bracket No No
    Recommended Stand Height 22-26" 24-28"
    Grille Yes Yes
    Moisture Resistancy No No
    Connections
    Biamp Inputs Yes No
    Other
    Parts Warranty 5 Years 5 Years
    Labor Warranty 5 Years 5 Years

    Most Popular Speakers
    Klipsch Reference R-51M
    Klipsch R-51M
    2-way | 93 dB | 8 ohms
    Wharfedale Elysian 2
    Wharfedale Elysian 2
    3-way | 89 dB | 4 ohms
    ELAC Debut 2.0 B6.2
    ELAC Debut 2.0 B6.2
    2-way | 87 dB | 6 ohms
    Bowers & Wilkins 606 S2 Anniversary Edition
    B&W 606 S2
    2-way | 88 dB | 8 ohms
    KEF Q150
    KEF Q150
    2-way | 86 dB | 8 ohms
    Klipsch Reference Premiere RP-500M
    Klipsch RP-500M
    2-way | 93 dB | 8 ohms
    Wharfedale EVO4.1
    Wharfedale EVO4.1
    2-way | 87 dB | 8 ohms
    Bowers & Wilkins 606
    B&W 606
    2-way | 88 dB | 8 ohms
    Copyright © 2025 by SpeakerDecision
    About Privacy Contact US Camera Decision

    Report a Correction