In this review, we will be comparing two different type of speakers by Polk Audio. Polk Audio Legend L200 is a Bookshelf speaker whereas the L600 is a Floor-standing speaker.
Let's have a brief look at the main features
of Polk L200 and Polk L600 first before getting into our more
detailed comparison.
Polk L200 Key Specs
- 2-way Design
- 1" Ring Radiator Tweeter
- 6.5" Polypropylene Woofer
- 46-38k Hz Frequency Response
- 85.5 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-200watts
- Weight:10.00kg
- Dimensions (H x W x D): 399.0" x 8-3/8" x 13-5/16"( 399.0 x 213.0 x 339.0mm )
Polk L600 Key Specs
- 3-way Design
- 1" Pinnacle Ring Radiator Tweeter
- 5.25" Midrange
- 2 x 7" Polypropylene Woofer
- 5.25" Midrange
- 34-38k Hz Frequency Response
- 86 dB Sensitivity
- Impedance: 4ohms
- Power Range:30-300watts
- Weight:35.30kg
- Dimensions (H x W x D): 1182.0" x 13" x 16-3/4"( 1182.0 x 331.0 x 426.0mm )
L200 and L600 are members of Polk Audio's Legend L series of speakers. Below you can find the loudspeakers from this series.
What size room are the Polk L200 and Polk L600 speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
Polk L200 |
Polk L600 |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Average |
| Large Room |
Average |
Good |
| Very Large Room |
Poor |
Average |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the Polk L200 and Polk L600 compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that L200 is a 2-way design whereas the L600 is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
Polk L200 |
Polk L600 |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5.25-inch |
|
Woofer
|
1 x 6.5-inch
|
2 x 7-inch
|
L200 features a 1" Ring Radiator Tweeter and 1 x 6.5" Polypropylene Woofer with a Crossover frequency at 2600Hz. On the other hand, the L600 features a 1" Pinnacle Ring Radiator Tweeter , a 5.25" Midrange and 2 x 7" Polypropylene Woofer with a Crossover frequency at 410Hz and 2900Hz.
Frequency Response
L200 has a frequency range of 46-38k Hz whereas L600 has a frequency range of 34-38k Hz. With a minimum frequency of 34Hz, the L600 can go significantly deeper on the low side and provide stronger bass compared to the L200's min frequency of 46Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
High Frequency
Bookshelf Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
L200 and L600 have the same Impedance of 4 ohms but where they differ is the sensitivity levels. L200 sensitivity is rated at 85.5 dB and the L600's is at 86 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the L200 and the L200 can provide this impedance level.
Sensitivity
Bookshelf Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
L200 can handle a max power of 300 watts RMS from the amp the whereas L200 has a max power handling value of 200 watts RMS , 100 watts less than the L600.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Both L200 and L600 features dual binding post speaker terminals for bi-amping or bi-wiring.
Polk L200's Post terminals allows Bi-amping or bi-wiring
Polk L600's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
L200 has a rear firing port whereas L600 has a down firing ports.
Polk L200 Enhanced Power Port Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Polk L200's and Polk L600's external dimensions. Polk L200 has external dimensions of 399.0 x 213.0 x 339.0mm ( 15-11/16 x 8-3/8 x 13-5/16inch) whereas Polk L600 has external dimensions of 1182.0 x 331.0 x 426.0mm ( 46-1/2 x 13 x 16-3/4inch) .
Polk L600 is clearly the larger of the two speakers. Its body is 118mm wider, 783mm taller and 87mm deeper than Polk L200.
Below you can see the front view size comparison of Polk L200 and Polk L600 in scale.
Comparison image of Polk L200 and Polk L600 Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Polk L200 is approximately 722.1cm2 / 111.9inch2 and base area of the Polk L600 is approximately 1410.1cm2 / 218.6inch2. The L200 requires 49% less surface area than the L600 which gives it a small advantage on placement in tight spaces.
What's in the Box of Polk L200?
Here are the items that are included inside the box of L200:
2 Bookshelf loudspeakers 2 Grilles Cleaning cloth Owners Manual Online Registration
What's in the Box of Polk L600?
Here are the items that come with the L600:
Floorstanding loudspeakerLarge grilleSmall grille4 Rubber feet (pre-installed)4 Spike feet (pre-installed)2 Jumper-wires (pre-installed)Cleaning clothOwners ManualOnline Registration
Height 
Base Surface Area 
Price per pair* 
Max Input Power 
Driver Setup 
Minimum Impedance 
Woofer Size 
Dolby Atmos Drivers