In this review, we will be comparing SourcePoint V10 and R11 Meta, two Passive Floor-standing speakers from MoFi and KEF.
Let's have a brief look at the main features
of MoFi SourcePoint V10 and KEF R11 Meta first before getting into our more
detailed comparison.
| Key Specs | MoFi SourcePoint V10 | KEF R11 Meta |
|---|
| Brand | MoFi United States · founded 2016 | KEF United Kingdom · founded 1961 |
|---|
| Design | 2-way | 3-way |
|---|
| Uni-Q driver | — | 12th Generation Uni-Q |
|---|
| Tweeter | 1.25" Soft-Dome | 1" Vented dome |
|---|
| Midrange | — | 5" |
|---|
| Woofer | 2 x 10" Paper Pulp | 4 x 6.5" Hybrid Aluminum |
|---|
| Frequency response | 27-30k Hz | 46-28k Hz |
|---|
| Sensitivity | 91 dB | 90 dB |
|---|
| Impedance | 6 ohms | 4 ohms |
|---|
| Power range | up to 200 watts | 15-300 watts |
|---|
| Weight | 72.73kg / 160lbs | 36.59kg / 80.5lbs |
|---|
| Dimensions (H x W x D) | 48-13/16" x 15-9/16" x 19-15/16" 1240.0 x 396.0 x 507.0mm | 51" x 12-1/4" x 15-1/8" 1296.0 x 312.0 x 385.0mm |
|---|
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that SourcePoint V10 is a 2-way design whereas the R11 Meta is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
MoFi SourcePoint V10KEF R11 Meta
TweeterMidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
MoFi SourcePoint V10 |
KEF R11 Meta |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1.25-inch
|
1-inch
|
|
Midrange
|
- |
1 x 5-inch |
|
Woofer
|
2 x 10-inch
|
4 x 6.5-inch
|
SourcePoint V10 features a 1.25" Soft-Dome Tweeter and 2 x 10" Paper Pulp Woofer. On the other hand, the R11 Meta features a 1" Aluminum with MAT absorber Vented dome Tweeter, a 5" Midrange and 4 x 6.5" Hybrid Aluminum Woofer with a Crossover frequency at 330Hz and 2500Hz.
Frequency Response
SourcePoint V10 has a frequency range of 27-30k Hz whereas R11 Meta has a frequency range of 46-28k Hz. With a minimum frequency of 27Hz, the SourcePoint V10 can go significantly deeper on the low side and provide stronger bass compared to the R11 Meta's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
SourcePoint V10 is a 6 ohms speaker compared to the R11 Meta which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the R11 Meta can provide this impedance level.
These two speakers also have different sensitivity levels. SourcePoint V10 sensitivity is rated at 91 dB and the R11 Meta's is rated at 90 dB. This 1 dB difference makes the MoFi SourcePoint V10 a more sensitive speaker compared to KEF R11 Meta, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
R11 Meta can handle a max power of 300 watts RMS, whereas SourcePoint V10 has a max power handling value of 200 watts RMS, 100 watts less than the R11 Meta.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both SourcePoint V10 and R11 Meta features dual binding post speaker terminals for bi-amping or bi-wiring.
KEF R11 Meta's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
KEF R11 Meta Port
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MoFi SourcePoint V10's and KEF R11 Meta's external dimensions. MoFi SourcePoint V10 has external dimensions of 1240.0 x 396.0 x 507.0mm (48-13/16inch x 15-9/16inch x 19-15/16inch) whereas KEF R11 Meta has external dimensions of 1296.0 x 312.0 x 385.0mm (51-inch x 12-1/4-inch x 15-1/8-inch).
KEF R11 Meta is 84mm narrower and 122mm less deeper than MoFi SourcePoint V10 but it is also 56mm taller.
Below you can see the front view size comparison of MoFi SourcePoint V10 and KEF R11 Meta in scale.
Comparison image of MoFi SourcePoint V10 and KEF R11 Meta Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MoFi SourcePoint V10 is approximately 2007.7cm2 / 311.2inch2 and base area of the KEF R11 Meta is approximately 1201.2cm2 / 186.2inch2. The SourcePoint V10 requires 67% more surface area than the R11 Meta which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MoFi SourcePoint V10 weighs 72.73kg / 160lbs and the KEF R11 Meta weighs 36.59kg / 80.5lbs. This makes the SourcePoint V10 99% heavier than the R11 Meta.
Here is a comparison of how SourcePoint V10 and R11 Meta's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of MoFi SourcePoint V10?
Here are the items that are included inside the box of SourcePoint V10:
- Floorstanding loudspeaker
- Grille
- 4 Isolation feet
- 4 Spike feet
- 4 Threaded-rods
- 4 Locking-rings
- 2 Jumper-plates (pre-installed)
- User Manual
What's in the Box of KEF R11 Meta?
Here are the items that come with the R11 Meta:
- R11 Meta
- Microfiber grille
- Plinth and spike accessories
- Port bungs
- User manual and warranty information
Sensitivity |
91 dB
vs
90 dB
|
Play louder with same amount of amplification power |
Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
Woofer Size |
10 inches
vs
6.5 inches
|
Larger woofer |
Low Frequency Response |
27 Hz
vs
46 Hz
|
Generates deeper bass |
High Frequency Response |
30k Hz
vs
28k Hz
|
Generates higher frequency |
Height |
1240mm
vs
1296mm
|
Easier to fit in smaller spaces |
Max Input Power |
300 watts
vs
200 watts
|
Handle more power from your amplifier |
Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
Number of Woofers |
4
vs
2
|
More woofers |
Base Surface Area |
1201cm2
vs
2007cm2
|
Takes less floor space |
Price per pair* |
6498USD
vs
7994USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MoFi SourcePoint V10 |
KEF R11 Meta |
| Brand |
MoFi |
KEF |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 200 watts |
15-300 watts |
| Sensitivity |
91 dB |
90 dB |
| Impedance |
6 ohms |
4 ohms |
| Impedance |
n/a |
3.2 ohms |
| Frequency Response |
27-30k Hz |
46-28k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
4 |
| Woofer Size |
10" |
6.5" |
| Woofer Composition |
Paper Pulp |
Hybrid Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.25" |
1" |
| Tweeter Type |
Soft-Dome |
Vented dome |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
10" |
5" |
| Crossover Frequency |
n/a |
330Hz and 2500Hz |
| Firing Direction |
n/a |
rear |
Physical Specs |
|
|
| Height |
1240.0mm (48.8") |
1296.0mm (51") |
| Width |
396.0mm (15.6") |
312.0mm (12.3") |
| Depth |
507.0mm (20") |
385.0mm (15.2") |
| Weight |
72.73kg (160lbs) |
36.59kg (80.5lbs) |
| Enclosure |
|
Bass Reflex |
| Finish |
MDF/wood-veneer |
n/a |
| Available Colors |
Black |
Black Gloss, White Gloss, Walnut |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 years |
| Labor Warranty |
5 Years |
5 years |
No single best speaker here - they are built to different priorities, and the right one depends on your room, your amplifier and what you listen to.
| Area | Better | Why |
|---|
| Bass | A | MoFi SourcePoint V10 digs deeper - 27Hz against 46Hz. |
| Amplifier needs | evenly matched | Similar sensitivity (91dB vs 90dB) - both want much the same power. |
| Amplifier match | A | MoFi SourcePoint V10 is the easier load at 6 ohms; the other is 4 ohms and wants an amplifier rated for it. |
| Headroom | B | KEF R11 Meta takes more power (300W vs 200W) - more in hand in a big room. |
| Size | depends | KEF R11 Meta is easier to place; MoFi SourcePoint V10 is bigger, which usually goes with fuller bass. Your room decides. |
| Cabinet | depends | Passive Radiator vs Ported. |
| Expandability | depends | MoFi SourcePoint V10: bi-amping; KEF R11 Meta: bi-amping. KEF R11 Meta sits in a wider range (7 models), so a matched surround system is easier later. |
| Price | B | KEF R11 Meta is cheaper - $6,498 against $7,994, about 19% less. |
A MoFi SourcePoint V10 B KEF R11 Meta
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: MoFi SourcePoint V10 measures better, KEF R11 Meta costs about about 23% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 46Hz anyway, which makes the cheaper KEF R11 Meta much easier to justify. In a large or open-plan room, MoFi SourcePoint V10 has the cabinet volume to fill it more easily; in a small room, near a wall or at desk distance, KEF R11 Meta is the easier speaker to get right.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.