In this review, we will be comparing two different types of speakers by MartinLogan. MartinLogan Motion SLM is a Bookshelf speaker whereas the Motion 60XTi is a Floor-standing speaker.
Let's have a brief look at the main features
of MartinLogan Motion SLM and MartinLogan 60XTi first before getting into our more
detailed comparison.
| Key Specs | MartinLogan Motion SLM | MartinLogan 60XTi |
|---|
| Brand | MartinLogan
United States · founded 1982 | MartinLogan
United States · founded 1982 |
|---|
| Design | 2-way | 3-way |
|---|
| Tweeter | 1x1.4" Folded Motion Ribbon | 1.25 x 2.4" Folded Motion XT |
|---|
| Midrange | — | 6.5" |
|---|
| Woofer | 2 x 4" | 2 x 8" Aluminum |
|---|
| Frequency response | 110-25k Hz | 35-25k Hz |
|---|
| Sensitivity | 94 dB | 94 dB |
|---|
| Impedance | 4 ohms | 4 ohms |
|---|
| Power range | — | 20-400 watts |
|---|
| Weight | 2.95kg / 6.5lbs | 30.00kg / 66lbs |
|---|
| Dimensions (H x W x D) | 25-5/16" x 6-7/16" x 1-7/8"
642.9 x 163.5 x 47.6mm | 46-3/16" x 9-1/16" x 15-9/16"
1174.0 x 231.0 x 396.0mm |
|---|
Motion SLM and Motion 60XTi are members of MartinLogan's Motion series of speakers. Below you can find the loudspeakers from this series.
MartinLogan Motion Series
History
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Motion SLM is a 2-way design whereas the Motion 60XTi is a 3-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
MartinLogan Motion SLMMartinLogan 60XTi
MidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
MartinLogan Motion SLM |
MartinLogan 60XTi |
|
Driver Setup
|
2-way
|
3-way
|
|
Tweeter
|
1x1.4-inch
|
1.25 x 2.4-inch
|
|
Midrange
|
- |
1 x 6.5-inch |
|
Woofer
|
2 x 4-inch
|
2 x 8-inch
|
Motion SLM features a 1x1.4" Folded Motion Ribbon Tweeter and 2 x 4" Woofer. On the other hand, the Motion 60XTi features a 1.25 x 2.4" Folded Motion XT Tweeter, a 6.5" Midrange and 2 x 8" Aluminum Woofer with a Crossover frequency at 400Hz and 2200Hz.
Frequency Response
Motion SLM has a frequency range of 110-25k Hz whereas Motion 60XTi has a frequency range of 35-25k Hz. With a minimum frequency of 35Hz, the Motion 60XTi can go significantly deeper on the low side and provide stronger bass compared to the Motion SLM's min frequency of 110Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Bookshelf class in our database.
Low Frequency
Bookshelf Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion SLM and Motion 60XTi have the same Impedance of 4 ohms and their sensitivity is also same at 94 dB.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Motion SLM and the Motion SLM can provide this impedance level.
Sensitivity
Bookshelf Speakers
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Motion 60XTi features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Motion SLM has a Spring post which doesn't feature bi-amping/bi-wiring.
MartinLogan 60XTi's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan Motion SLM's and MartinLogan 60XTi's external dimensions. MartinLogan Motion SLM has external dimensions of 642.9 x 163.5 x 47.6mm () whereas MartinLogan 60XTi has external dimensions of 1174.0 x 231.0 x 396.0mm (46-3/16 x 9-1/16 x 15-9/16inch).
MartinLogan 60XTi is clearly the larger of the two speakers. Its body is 67.5mm wider, 531.1mm taller and 348.4mm deeper than MartinLogan Motion SLM.
Size, drawn to scale
Both speakers and both views share one scale, so everything here is directly comparable. Hover a box for its dimensions.
One scale for both, standing on the same surface and pushed back to the same wall, so the deeper one visibly sticks out further.
MartinLogan 60XTi needs about 1075% more floor or shelf area. MartinLogan 60XTi is 348mm deeper, so it stands that much further out from the wall. MartinLogan 60XTi is 531mm taller.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan Motion SLM is approximately 77.8cm2 / 12.1inch2 and base area of the MartinLogan 60XTi is approximately 914.8cm2 / 141.8inch2. The Motion SLM requires 91% less surface area than the Motion 60XTi which gives it a small advantage on placement in tight spaces.
What's in the Box of MartinLogan 60XTi?
Here are the items that come with the Motion 60XTi:
- Floorstanding loudspeaker
- 2 Grilles
- 4 Rubber feet (pre-installed)
- 4 Spike feet (w/ nuts attached)
- 2 Feet stabizers
- 4 Bolts
- Hex-key
- Users Manual
- Warranty/Registration Information