In this review, we will be comparing Motion 60XTi and Motion 20i, two Passive Floor-standing speakers by MartinLogan.
Let's have a brief look at the main features
of MartinLogan 60XTi and MartinLogan 20i first before getting into our more
detailed comparison.
| Key Specs | MartinLogan 60XTi | MartinLogan 20i |
|---|
| Brand | MartinLogan
United States · founded 1982 | MartinLogan
United States · founded 1982 |
|---|
| Design | 3-way | 2-way |
|---|
| Tweeter | 1.25 x 2.4" Folded Motion XT | 1.0 x 1.4" Folded Motion |
|---|
| Midrange | 6.5" | — |
|---|
| Woofer | 2 x 8" Aluminum | 2 x 5.5" Aluminum |
|---|
| Frequency response | 35-25k Hz | 46-25k Hz |
|---|
| Sensitivity | 94 dB | 90 dB |
|---|
| Impedance | 4 ohms | 4 ohms |
|---|
| Power range | 20-400 watts | 20-200 watts |
|---|
| Weight | 30.00kg / 66lbs | 15.00kg / 33lbs |
|---|
| Dimensions (H x W x D) | 46-3/16" x 9-1/16" x 15-9/16"
1174.0 x 231.0 x 396.0mm | 35-5/8" x 6-7/8" x 12-1/16"
905.0 x 175.0 x 307.0mm |
|---|
Motion 60XTi and Motion 20i are members of MartinLogan's Motion series of speakers. Below you can find the loudspeakers from this series.
MartinLogan Motion Series
History
What size room are the MartinLogan 60XTi and MartinLogan 20i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
MartinLogan 60XTi |
MartinLogan 20i |
| Near-field |
Are you nuts? |
Bad |
| Small Room |
Poor |
Poor |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Good |
| Very Large Room |
Good |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
One of the fundamental differences between these two speakers is that Motion 60XTi is a 3-way design whereas the Motion 20i is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
MartinLogan 60XTiMartinLogan 20i
MidrangeWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
MartinLogan 60XTi |
MartinLogan 20i |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.25 x 2.4-inch
|
1.0 x 1.4-inch
|
|
Midrange
|
1 x 6.5-inch |
- |
|
Woofer
|
2 x 8-inch
|
2 x 5.5-inch
|
Motion 60XTi features a 1.25 x 2.4" Folded Motion XT Tweeter, a 6.5" Midrange and 2 x 8" Aluminum Woofer with a Crossover frequency at 400Hz and 2200Hz. On the other hand, the Motion 20i features a 1.0 x 1.4" Folded Motion Tweeter and 2 x 5.5" Aluminum Woofer with a Crossover frequency at 500Hz and 2600Hz.
Frequency Response
Motion 60XTi has a frequency range of 35-25k Hz whereas Motion 20i has a frequency range of 46-25k Hz. With a minimum frequency of 35Hz, the Motion 60XTi can go significantly deeper on the low side and provide stronger bass compared to the Motion 20i's min frequency of 46Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion 60XTi and Motion 20i have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Motion 60XTi sensitivity is rated at 94 dB and the Motion 20i's is at 90 dB. This 4 dB difference makes the MartinLogan 60XTi a more sensitive speaker compared to MartinLogan 20i, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Motion 60XTi and the Motion 60XTi can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
Motion 60XTi can handle a max power of 400 watts RMS, whereas Motion 20i has a max power handling value of 200 watts RMS, 200 watts less than the Motion 60XTi.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both Motion 60XTi and Motion 20i features dual binding post speaker terminals for bi-amping or bi-wiring.
MartinLogan 60XTi's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
MartinLogan 20i's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both Motion 60XTi and Motion 20i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 60XTi's and MartinLogan 20i's external dimensions. MartinLogan 60XTi has external dimensions of 1174.0 x 231.0 x 396.0mm (46-3/16 x 9-1/16 x 15-9/16inch) whereas MartinLogan 20i has external dimensions of 905.0 x 175.0 x 307.0mm (35-5/8 x 6-7/8 x 12-1/16inch).
MartinLogan 60XTi is clearly the larger of the two speakers. Its body is 56mm wider, 269mm taller and 89mm deeper than MartinLogan 20i.
Below you can see the front view size comparison of MartinLogan 60XTi and MartinLogan 20i in scale.
Comparison image of MartinLogan 60XTi and MartinLogan 20i Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 60XTi is approximately 914.8cm2 / 141.8inch2 and base area of the MartinLogan 20i is approximately 537.3cm2 / 83.3inch2. The Motion 60XTi requires 70% more surface area than the Motion 20i which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan 60XTi weighs 30.00kg / 66lbs and the MartinLogan 20i weighs 15.00kg / 33lbs. This makes the Motion 60XTi 100% heavier than the Motion 20i.
Here is a comparison of how Motion 60XTi and Motion 20i's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of MartinLogan 60XTi?
Here are the items that are included inside the box of Motion 60XTi:
- Floorstanding loudspeaker
- 2 Grilles
- 4 Rubber feet (pre-installed)
- 4 Spike feet (w/ nuts attached)
- 2 Feet stabizers
- 4 Bolts
- Hex-key
- Users Manual
- Warranty/Registration Information
What's in the Box of MartinLogan 20i?
Here are the items that come with the Motion 20i:
- Floorstanding loudspeaker
- 2 Grilles
- 4 Rubber feet (pre-installed)
- 4 Spike feet (w/ nuts attached)
- Users Manual
- Warranty/Registration Information
 Max Input Power |
400 watts
vs
200 watts
|
Handle more power from your amplifier |
 Driver Setup |
3-way
vs
2-way
|
Have a dedicated mid-range driver |
 Sensitivity |
94 dB
vs
90 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
5.5 inches
|
Larger woofer |
|
Low Frequency Response |
35 Hz
vs
46 Hz
|
Generates deeper bass |
 Height |
905mm
vs
1174mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
537cm2
vs
914cm2
|
Takes less floor space |
 Price per pair* |
2000USD
vs
3750USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
MartinLogan Motion 60XTi |
MartinLogan Motion 20i |
| Brand |
MartinLogan |
MartinLogan |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
20-400 watts |
20-200 watts |
| Sensitivity |
94 dB |
90 dB |
| Impedance |
4 ohms |
4 ohms |
| Frequency Response |
35-25k Hz |
46-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
8" |
5.5" |
| Woofer Composition |
Aluminum |
Aluminum |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1.25 x 2.4" |
1.0 x 1.4" |
| Tweeter Type |
Folded Motion XT |
Folded Motion |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
6.5" |
No |
| Crossover Frequency |
400Hz and 2200Hz |
500Hz and 2600Hz |
| Firing Direction |
rear |
rear |
| Suggested Break-in Period |
Allow 72 hours of break-in at 90 dB |
Allow 72 hours of break-in at 90 dB |
Physical Specs |
|
|
| Height |
1174.0mm (46.2") |
905.0mm (35.6") |
| Width |
231.0mm (9.1") |
175.0mm (6.9") |
| Depth |
396.0mm (15.6") |
307.0mm (12.1") |
| Weight |
30.00kg (66lbs) |
15.00kg (33lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Lacquer |
MDF/Lacquer |
| Available Colors |
Gloss Black, Matt White, Red Walnut |
Gloss Black, Matt White, Red Walnut |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
Siblings in MartinLogan's Motion series, so they share a family sound. It comes down to size, output and price.
| Area | Better | Why |
|---|
| Bass | A | MartinLogan 60XTi digs deeper - 35Hz against 46Hz. |
| Amplifier needs | A | MartinLogan 60XTi is more sensitive (94dB vs 90dB), so it goes louder on the same amplifier. |
| Headroom | A | MartinLogan 60XTi takes more power (400W vs 200W) - more in hand in a big room. |
| Size | depends | MartinLogan 20i is easier to place; MartinLogan 60XTi is bigger, which usually goes with fuller bass. Your room decides. |
| Expandability | depends | MartinLogan 60XTi: bi-amping; MartinLogan 20i: bi-amping. |
| Price | B | MartinLogan 20i is cheaper - $2,000 against $3,750, about 47% less; arguably a different class. |
A MartinLogan 60XTi B MartinLogan 20i
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
The usual trade-off: MartinLogan 60XTi measures better, MartinLogan 20i costs about about 88% more% less. Whether that gap is worth the money is the call only you can make - and in a normal room it is often smaller than the numbers suggest. If a subwoofer is in your plans, the bass gap largely stops mattering - you would be crossing over above 46Hz anyway, which makes the cheaper MartinLogan 20i much easier to justify. Match it to your room: we rate MartinLogan 60XTi the better fit for a very large room, and MartinLogan 20i for a mid-size room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.