In this review, we will be comparing Motion 6i and Motion 30i, two Passive Center Channel speakers by MartinLogan Let's have a brief look at the main features
of MartinLogan 6i and MartinLogan 30i first before getting into our more
detailed comparison.
Motion 6i and Motion 30i are members of MartinLogan's Motion series of speakers. Below you can find the loudspeakers from this series.
MartinLogan Motion Series History
What size room are the MartinLogan 6i and MartinLogan 30i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the MartinLogan 6i and MartinLogan 30i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both Motion 6i and Motion 30i are 2-way speakers.
| Driver |
MartinLogan 6i |
MartinLogan 30i |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1.0 x 1.0-inch
|
1.0 x 1.4-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 3.5-inch
|
1 x 5.25-inch
|
Motion 6i features a 1.0 x 1.0" Folded Motion Tweeter and 2 x 3.5" poly cone woofers with rigid dust caps Woofer . On the other hand, the Motion 30i features a 1.0 x 1.4" Folded Motion Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 400Hz and 2600Hz.
Frequency Response
Motion 6i has a frequency range of 120-23k Hz whereas Motion 30i has a frequency range of 65-25k Hz. With a minimum frequency of 65Hz, the Motion 30i can go significantly deeper on the low side and provide stronger bass compared to the Motion 6i's min frequency of 120Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Center Channel class in our database.
Low Frequency
Center Channel Speakers
High Frequency
Center Channel Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion 6i is a 6 ohms speaker compared to the Motion 30i which has a nominal impedance of 4 ohms. Lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit especially when played at high volume levels, so make sure the amp you pair with the Motion 30i can provide this impedance level.
These two speakers also have different sensitivity levels. Motion 6i sensitivity is rated at 89 dB and the Motion 30i's is rated at 91 dB. This 2 dB difference makes the MartinLogan 30i a more sensitive speaker compared to MartinLogan 6i, hence will play louder with the same amount of watts.
Sensitivity
Center Channel Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Motion 6i can handle a max power of 200 watts RMS from the amp the whereas Motion 6i has a max power handling value of 130 watts RMS , 70 watts less than the Motion 30i.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion 6i features Custom 5-way tool-less binding posts type posts and Motion 30i has a Custom 5-way tool-less binding posts type posts. None of these speakers feature bi-amping/bi-wiring.
MartinLogan 6i's Spring post terminals
MartinLogan 30i's Custom 5-way tool-less binding posts terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 6i's and MartinLogan 30i's external dimensions. MartinLogan 6i has external dimensions of 134.0 x 445.0 x 102.0mm ( 5-1/4 x 17-1/2 x 4inch) whereas MartinLogan 30i has external dimensions of 177.0 x 423.0 x 281.0mm ( 6-15/16 x 16-5/8 x 11-1/16inch) .
MartinLogan 6i is 43mm shorter and 179mm less deeper than MartinLogan 30i but it is also 22mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 6i is approximately 453.9cm2 / 70.4inch2 and base area of the MartinLogan 30i is approximately 1188.6cm2 / 184.2inch2. The Motion 6i requires 62% less surface area than the Motion 30i which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The MartinLogan 6i weighs 2.59kg / 5.7lbs and the MartinLogan 30i weighs 8.18kg / 18lbs. This makes the Motion 30i 216% heavier than the Motion 6i.
Here is a comparison of how Motion 6i and Motion 30i's weights compare with the average, max and min weights in Passive Center Channel class.
Weight
All Center Channel Speakers
What's in the Box of MartinLogan 6i?
Here are the items that are included inside the box of Motion 6i:
LCR loudspeakerGrille2 Wall-bracket2 Shoulder bolts4 Rubber bumpersCleaning clothUser-feets Manual (En/Fr)Installation templateProduct Registration Card
What's in the Box of MartinLogan 30i?
Here are the items that come with the Motion 30i:
Center-channel loudspeaker Grille 4 Rubber feet Users Manual Warranty/Registration Information
 Nominal Impedance |
6 ohms
vs
4 ohms
|
Less selective with amplifiers |
 Number of Woofers |
2
vs
1
|
More woofers |
 Height |
134mm
vs
177mm
|
Easier to fit in smaller spaces |
 Base Surface Area |
453cm2 (445x102mm)
vs
1188cm2 (423x281mm)
|
Takes less floor space |
 Price per pair* |
300USD
vs
900USD
|
costs less (*prices may change depending on the seller, location and time) |
 Max Input Power |
200 watts
vs
130 watts
|
Handle more power from your amplifier |
 Sensitivity |
91 dB
vs
89 dB
|
Play louder with same amount of amplification power |
| Woofer Size |
5.25 inches
vs
3.5 inches
|
Larger woofer |
| Low Frequency Response |
65 Hz
vs
120 Hz
|
Generates deeper bass |
 High Frequency Response |
25k Hz
vs
23k Hz
|
Generates higher frequency |
| General |
MartinLogan Motion 6i |
MartinLogan Motion 30i |
| Brand |
MartinLogan |
MartinLogan |
| Speaker Type |
Center channel speaker |
Center channel speaker |
| Power Range |
20-130 watts |
20-200 watts |
| Sensitivity |
89 dB |
91 dB |
| Impedance |
6 ohms |
4 ohms |
| Frequency Response |
120-23k Hz |
65-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
1 |
| Woofer Size |
3.5" |
5.25" |
| Woofer Composition |
poly cone woofers with rigid dust caps |
Aluminum |
| Woofer Surround Material |
n/a |
Rubber |
| Tweeter Size |
1.0 x 1.0" |
1.0 x 1.4" |
| Tweeter Type |
Folded Motion |
Folded Motion |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
n/a |
400Hz and 2600Hz |
| Firing Direction |
n/a |
rear |
| Suggested Break-in Period |
Allow 72 hours of break-in at 90 dB |
Allow 72 hours of break-in at 90 dB |
Physical Specs |
|
|
| Height |
134.0mm (5.3") |
177.0mm (7") |
| Width |
445.0mm (17.5") |
423.0mm (16.7") |
| Depth |
102.0mm (4") |
281.0mm (11.1") |
| Weight |
2.59kg (5.7lbs) |
8.18kg (18lbs) |
| Enclosure |
Passive Radiator |
Bass Reflex |
| Finish |
n/a |
MDF/Lacquer |
| Available Colors |
Gloss Black, Matt White, Red Walnut |
White |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
n/a |
No |
Other |
|
|
| Parts Warranty |
5 Yrs w/ Registration |
5 Years |
| Labor Warranty |
5 Yrs w/ Registration |
5 Years |