In this review, we will be comparing two different type of speakers by MartinLogan. MartinLogan Motion 40i is a Floor-standing speaker whereas the Motion 30i is a Center Channel speaker.
Let's have a brief look at the main features
of MartinLogan 40i and MartinLogan 30i first before getting into our more
detailed comparison.
MartinLogan 40i Key Specs
- 3-way Design
- 1.0 x 1.4" Folded Motion Tweeter
- 5.5" Midrange
- 2 x 6.5" Aluminum Woofer
- 40-25k Hz Frequency Response
- 92 dB Sensitivity
- Impedance: 4ohms
- Power Range:20-300watts
- Weight:20.40kg
- Dimensions (H x W x D): 1055.0" x 7-9/16" x 13-1/16"( 1055.0 x 193.0 x 332.0mm )
MartinLogan 30i Key Specs
- 2-way Design
- 1.0 x 1.4" Folded Motion Tweeter
- 5.25" Aluminum Woofer
- 65-25k Hz Frequency Response
- 91 dB Sensitivity
- Impedance: 4ohms
- Power Range:20-200watts
- Weight:8.18kg
- Dimensions (H x W x D): 177.0" x 16-5/8" x 11-1/16"( 177.0 x 423.0 x 281.0mm )
Motion 40i and Motion 30i are members of MartinLogan's Motion series of speakers. Below you can find the loudspeakers from this series.
MartinLogan Motion Series History
What size room are the MartinLogan 40i and MartinLogan 30i speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
| Listening Environment* |
MartinLogan 40i |
MartinLogan 30i |
| Near-field |
Bad |
Poor |
| Small Room |
Poor |
Average |
| Mid-size Room |
Average |
Good |
| Large Room |
Good |
Average |
| Very Large Room |
Average |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2, Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: > 400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual listening experience changes depending on floor height, room shape, surface materials, listening position, speaker locations, etc.)
In the following sections, we will get into more detail in order to better understand how the MartinLogan 40i and MartinLogan 30i compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
One of the fundamental differences between these two speakers is that Motion 40i is a 3-way design whereas the Motion 30i is a 2-way speaker. 3-way designs utilize a midrange driver in addition to the tweeter and woofer on 2-way designs. Designing a crossover for a 3-way speaker is a complicated process and generally increases the overall cost of the speaker.
| Driver |
MartinLogan 40i |
MartinLogan 30i |
|
Driver Setup
|
3-way
|
2-way
|
|
Tweeter
|
1.0 x 1.4-inch
|
1.0 x 1.4-inch
|
|
Midrange
|
1 x 5.5-inch |
- |
|
Woofer
|
2 x 6.5-inch
|
1 x 5.25-inch
|
Motion 40i features a 1.0 x 1.4" Folded Motion Tweeter , a 5.5" Midrange and 2 x 6.5" Aluminum Woofer with a Crossover frequency at 500Hz and 2600Hz. On the other hand, the Motion 30i features a 1.0 x 1.4" Folded Motion Tweeter and 1 x 5.25" Aluminum Woofer with a Crossover frequency at 400Hz and 2600Hz.
Frequency Response
Motion 40i has a frequency range of 40-25k Hz whereas Motion 30i has a frequency range of 65-25k Hz. With a minimum frequency of 40Hz, the Motion 40i can go significantly deeper on the low side and provide stronger bass compared to the Motion 30i's min frequency of 65Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
Motion 40i and Motion 30i have the same Impedance of 4 ohms but where they differ is the sensitivity levels. Motion 40i sensitivity is rated at 92 dB and the Motion 30i's is at 91 dB. This 1 dB difference makes the MartinLogan 40i a more sensitive speaker compared to MartinLogan 30i, hence will play louder with the same amount of watts.
One thing to keep in mind that the lower impedance speakers, especially the ones that are rated at 4 ohms may put more pressure on the amplifier unit comared to higher impedance speakers especially at high volume levels, so make sure the amp you pair with the Motion 40i and the Motion 40i can provide this impedance level.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
Motion 40i can handle a max power of 300 watts RMS from the amp the whereas Motion 30i has a max power handling value of 200 watts RMS, 100 watts less than the Motion 40i.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
Motion 40i features Custom 5-way bi-wire tool-less binding posts posts which make bi-amping or bi-wiring possible. Motion 30i has a Custom 5-way tool-less binding posts which doesn't feature bi-amping/bi-wiring.
MartinLogan 40i's Custom 5-way bi-wire tool-less binding posts terminals allows Bi-amping or bi-wiring
MartinLogan 30i's Custom 5-way tool-less binding posts terminals
Cabinet Type and Port Position
Both Motion 40i and Motion 30i have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
MartinLogan 40i Port
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare MartinLogan 40i's and MartinLogan 30i's external dimensions. MartinLogan 40i has external dimensions of 1055.0 x 193.0 x 332.0mm ( 41-1/2 x 7-9/16 x 13-1/16inch) whereas MartinLogan 30i has external dimensions of 177.0 x 423.0 x 281.0mm ( 6-15/16 x 16-5/8 x 11-1/16inch) .
MartinLogan 30i is 878mm shorter and 51mm less deeper than MartinLogan 40i but it is also 230mm wider.
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the MartinLogan 40i is approximately 640.8cm2 / 99.3inch2 and base area of the MartinLogan 30i is approximately 1188.6cm2 / 184.2inch2. The Motion 40i requires 46% less surface area than the Motion 30i which gives it a small advantage on placement in tight spaces.
What's in the Box of MartinLogan 40i?
Here are the items that are included inside the box of Motion 40i:
Floorstanding loudspeaker2 Grilles4 Rubber feet (pre-installed)4 Spike feet (w/ nuts attached)Users ManualWarranty/Registration Information
What's in the Box of MartinLogan 30i?
Here are the items that come with the Motion 30i:
Center-channel loudspeaker Grille 4 Rubber feet Users Manual Warranty/Registration Information
Max Input Power 
Driver Setup 
Sensitivity 
Woofer Size 
Bi-Amping and Bi-Wiring 
Base Surface Area 
Height 
Price per pair*