In this review, we will be comparing R-625FA and R-820F, two Passive Floor-standing speakers by Klipsch Let's have a brief look at the main features
of Klipsch R-625FA and Klipsch R-820F first before getting into our more
detailed comparison.
R-625FA and R-820F are members of Klipsch's Reference (R) Floor-standing series of speakers. Below you can find the loudspeakers from this series.
Klipsch Reference (R) Floor-standing Series History
What size room are the Klipsch R-625FA and Klipsch R-820F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision factor. Here we have compared their suitability to various sizes of environments considering their size and max power parameters:
In the following sections, we will get into more detail in order to better understand how the Klipsch R-625FA and Klipsch R-820F compare and hopefully end up with enough arguments to decide which one of these loudspeakers is the better choice for you.
**This post contains affiliate links, and I will be compensated if you make a purchase after clicking
through my links. As an Amazon Associate I earn from qualifying purchases.
Drivers
Both R-625FA and R-820F are 2-way speakers.
| Driver |
Klipsch R-625FA |
Klipsch R-820F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 6.5-inch
|
2 x 8-inch
|
R-625FA features a 1" Tweeter and 2 x 6.5" Copper-spun IMG Woofer with a Crossover frequency at 2000Hz. On the other hand, the R-820F features a 1" Tweeter and 2 x 8" Copper-spun IMG Woofer .
Frequency Response
R-625FA has a frequency range of 38-21k Hz whereas R-820F has a frequency range of 35-21k Hz. With a minimum frequency of 35Hz, the R-820F can go slightly deeper then the R-625FA's min frequency of 38Hz.
Below graphs depict how these two speakers compare with the max, min and average values of the Min and Max Frequencies of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
High Frequency
Floor-standing Speakers
None of these speakers achieves full range experience which is commonly agreed as 20Hz-20kHz. In order to achieve lower lows / deeper bass, we recommend you pair these with a subwoofer. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
R-625FA and R-820F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. R-625FA sensitivity is rated at 96 dB and the R-820F's is at 97 dB. This 1 dB difference makes the Klipsch R-820F a more sensitive speaker compared to Klipsch R-625FA, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. While using an amplifier within this range ensures the nominal performance , inputting a power that is higher than the max wattage can result in a damaged speaker.
R-625FA can handle a max power of 150 watts RMS from the amp the whereas R-625FA has a max power handling value of 100 watts RMS , 50 watts less than the R-820F.
Keep in mind that a higher max power handling value doesn't necessarily make that a louder speaker
compared to a lower max handling speaker. Loudness or the sound level is also impacted by parameters
such as Impedance, sensitivity and system efficiencies.
Input Type and Bi-Amping / Bi-Wiring
R-625FA features Post type posts and R-820F has a Post type posts. None of these speakers feature bi-amping/bi-wiring.
Klipsch R-625FA's Post terminals
Physical Specs
Size of a speaker can sometimes become an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch R-625FA's and Klipsch R-820F's external dimensions. Klipsch R-625FA has external dimensions of 1021.0 x 239.0 x 426.0mm ( 40-3/16 x 9-3/8 x 16-3/4inch) whereas Klipsch R-820F has external dimensions of 1096.0 x 277.0 x 426.0mm ( 43-1/8 x 10-7/8 x 16-3/4inch) .
Below you can see the front view size comparison of Klipsch R-625FA and Klipsch R-820F in scale.
Comparison image of Klipsch R-625FA and Klipsch R-820F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch R-625FA is approximately 1018.1cm2 / 157.8inch2 and base area of the Klipsch R-820F is approximately 1180.0cm2 / 182.9inch2. The R-625FA requires 14% less surface area than the R-820F which gives it a small advantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch R-625FA weighs 22.20kg / 48.8lbs and the Klipsch R-820F weighs 24.55kg / 54lbs. This makes the R-820F 11% heavier than the R-625FA.
Here is a comparison of how R-625FA and R-820F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch R-625FA?
Here are the items that are included inside the box of R-625FA:
Floorstanding loudspeaker2 Grilles (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
What's in the Box of Klipsch R-820F?
Here are the items that come with the R-820F:
Floorstanding loudspeakerGrille (installed)2 Feet4 ScrewsQuick Setup GuideImportant Safety InstructionsWarranty InformationLoudspeaker Feet note
 Dolby Atmos Drivers |
Built-in 1 x 5.25
vs
No
|
Dolby Atmos Compatibility |
 Base Surface Area |
1018cm2 (239x426mm)
vs
1180cm2 (277x426mm)
|
Takes less floor space |
 Max Input Power |
150 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
97 dB
vs
96 dB
|
Play louder with same amount of amplification power |
 Woofer Size |
8 inches
vs
6.5 inches
|
Larger woofer |
| Low Frequency Response |
35 Hz
vs
38 Hz
|
Generates deeper bass |
 Price per pair* |
1198USD
vs
1658USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference R-625FA |
Klipsch Reference R-820F |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 100 watts |
up to 150 watts |
| Sensitivity |
96 dB |
97 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
38-21k Hz |
35-21k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
6.5" |
8" |
| Woofer Composition |
Copper-spun IMG |
Copper-spun IMG |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
2000Hz |
n/a |
| Firing Direction |
rear |
n/a |
Physical Specs |
|
|
| Height |
1096.0mm (43.1") |
1096.0mm (43.1") |
| Width |
239.0mm (9.4") |
277.0mm (10.9") |
| Depth |
426.0mm (16.8") |
426.0mm (16.8") |
| Weight |
22.20kg (48.8lbs) |
24.55kg (54lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Black |
Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
No |
No |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |