In this review, we will be comparing RP-5000F II and RP-5000F, two Passive Floor-standing speakers by Klipsch.
Let's have a brief look at the main features
of Klipsch RP-5000F II and Klipsch RP-5000F first before getting into our more
detailed comparison.
| Key Specs | Klipsch RP-5000F II | Klipsch RP-5000F |
|---|
| Brand | Klipsch
United States · founded 1946 | Klipsch
United States · founded 1946 |
|---|
| Design | 2-way | 2-way |
|---|
| Tweeter | 1" Tractrix Horn | 1" Tractrix Horn |
|---|
| Woofer | 2 x 5.25" Cerametallic cone | 2 x 5.25" Cerametallic |
|---|
| Frequency response | 35-25k Hz | 35-25k Hz |
|---|
| Sensitivity | 95 dB | 96 dB |
|---|
| Impedance | 8 ohms | 8 ohms |
|---|
| Power range | up to 100 watts | up to 125 watts |
|---|
| Weight | 17.50kg / 38.5lbs | 16.36kg / 36lbs |
|---|
| Dimensions (H x W x D) | 36-1/8" x 8-3/16" x 14-5/16"
918.0 x 208.0 x 364.0mm | 36-3/16" x 8-1/8" x 14-5/16"
920.0 x 207.0 x 364.0mm |
|---|
What size room are the Klipsch RP-5000F II and Klipsch RP-5000F speakers good for?
The size of the room in which you are planning to use these loudspeakers is an important decision
factor. Here we have compared their suitability to various sizes of environments considering their size
and max power parameters:
| Listening Environment* |
Klipsch RP-5000F II |
Klipsch RP-5000F |
| Near-field |
Poor |
Bad |
| Small Room |
Average |
Poor |
| Mid-size Room |
Good |
Good |
| Large Room |
Poor |
Good |
| Very Large Room |
Bad |
Poor |
(* Approximate Room sizes: Small < 100sq. ft / 9 m2,
Mid-size: 100-220 sq. ft / 9-20 m2, Large 220-400 sq. ft / 20-36 m2, Very Large: >
400 sq. ft / 36 m2.
Average Floor Height: 9" / 2.7m. Typical room sizes differ from country to country, and the actual
listening experience changes depending on floor height, room shape, surface materials, listening
position, speaker locations, etc.)
The sections below take each area in turn: drivers, frequency response, physical size and what you get in the box.
Drivers
Both RP-5000F II and RP-5000F are 2-way speakers.
Klipsch RP-5000F IIKlipsch RP-5000F
TweeterWoofer
Front view, drawn to scale - cabinets and drivers share one scale, so sizes are directly comparable. Hover a driver for its size.
| Driver |
Klipsch RP-5000F II |
Klipsch RP-5000F |
|
Driver Setup
|
2-way
|
2-way
|
|
Tweeter
|
1-inch
|
1-inch
|
|
Midrange
|
- |
- |
|
Woofer
|
2 x 5.25-inch
|
2 x 5.25-inch
|
RP-5000F II features a 1" titanium Tractrix Horn Tweeter and 2 x 5.25" Cerametallic cone Woofer with a Crossover frequency at 1900 Hz. On the other hand, the RP-5000F features a 1" Tractrix Horn Tweeter and 2 x 5.25" Cerametallic Woofer with a Crossover frequency at 1800 Hz.
Frequency Response
RP-5000F II and RP-5000F has exactly the same frequency range of 35-25k Hz.
The graph below depicts how these two speakers compare with the max, min and average Low Frequency values of other speakers in the Floor-standing class in our database.
Low Frequency
Floor-standing Speakers
Neither pair reaches down to 20Hz, the usual definition of full-range, which is normal for speakers of this size. If you want the bottom octave for movies or bass-heavy music, add a subwoofer to whichever you choose. Visit our Powered Subwoofers section to find out more about the available options.
Impedance and Sensitivity
RP-5000F II and RP-5000F have the same Impedance of 8 ohms but where they differ is the sensitivity levels. RP-5000F II sensitivity is rated at 95 dB and the RP-5000F's is at 96 dB. This 1 dB difference makes the Klipsch RP-5000F a more sensitive speaker compared to Klipsch RP-5000F II, hence will play louder with the same amount of watts.
Sensitivity
Floor-standing Speakers
Power Range
Power
range is the range of input power in watts RMS that a loudspeaker is designed to handle. Staying
within that range gives nominal performance; driving the speaker beyond its maximum wattage can damage it.
RP-5000F can handle a max power of 125 watts RMS, whereas RP-5000F II has a max power handling value of 100 watts RMS, 25 watts less than the RP-5000F.
Note that higher power handling does not make a speaker louder: that depends mainly on
sensitivity and impedance. The calculator below shows how loud each of these actually plays
on a real amplifier.
Which plays louder on your amplifier?
Starting with a popular amplifier - change it to the one you own, or any you are
considering, and watch both numbers move.
Input Type and Bi-Amping / Bi-Wiring
Both RP-5000F II and RP-5000F features dual binding post speaker terminals for bi-amping or bi-wiring.
Klipsch RP-5000F II's Binding post terminals allows Bi-amping or bi-wiring
Cabinet Type and Port Position
Both RP-5000F II and RP-5000F have rear firing ports. Rear ported speakers generally need more room between the backside of the speaker and the wall compared to sealed and front/bottom ported speakers. Placing the speakers too close to the walls may cause the bass to sound boomy.
If you are limited in space and can't get the speakers away from the backwall, check our Speakers with Front Firing Ports page.
Physical Specs
The size of a speaker can sometimes be an important decision factor due to space constraints or in some cases purely for esthetic reasons. In this section, we are going to compare Klipsch RP-5000F II's and Klipsch RP-5000F's external dimensions. Klipsch RP-5000F II has external dimensions of 918.0 x 208.0 x 364.0mm (36-1/8 x 8-3/16 x 14-5/16inch) whereas Klipsch RP-5000F has external dimensions of 920.0 x 207.0 x 364.0mm (36-3/16 x 8-1/8 x 14-5/16inch).
Below you can see the front view size comparison of Klipsch RP-5000F II and Klipsch RP-5000F in scale.
Comparison image of Klipsch RP-5000F II and Klipsch RP-5000F Size and External Dimensions
Base Surface Area Comparison
Base surface area of a loudspeaker may become a determining factor when the space in your room or desk is limited.
The base surface area of the Klipsch RP-5000F II is approximately 757.1cm2 / 117.4inch2 and base area of the Klipsch RP-5000F is approximately 753.5cm2 / 116.8inch2. The RP-5000F II requires 0% more surface area than the RP-5000F which gives it a small disadvantage on placement in tight spaces.
Weight Comparison The weight of a loudspeaker can become an important factor if you need to move and reposition the unit often. Weight of a speaker can also "sometimes" be an indicator of the rigidity of the enclosure and the quality of the internal components used. The Klipsch RP-5000F II weighs 17.50kg / 38.5lbs and the Klipsch RP-5000F weighs 16.36kg / 36lbs. This makes the RP-5000F II 7% heavier than the RP-5000F.
Here is a comparison of how RP-5000F II and RP-5000F's weights compare with the average, max and min weights in Passive Floor-standing class.
Weight
All Floor-standing Speakers
What's in the Box of Klipsch RP-5000F II?
Here are the items that are included inside the box of RP-5000F II:
- Floorstanding loudspeaker
- Stabilizer feet (pre-installed)
- Grille
- 2 Terminal jumpers (pre-installed)
- Rubber cap (pre-installed)
- User Manual
- Important Safety Instructions
- Warranty Information
What's in the Box of Klipsch RP-5000F?
Here are the items that come with the RP-5000F:
- Floorstanding loudspeaker
- Stabilizer feet (installed)
- Grille (installed)
- 2 Terminal jumpers (installed)
- User Manual
- Important Safety Instructions
- Warranty Information
 Dolby Atmos Drivers |
Optional
vs
No
|
Dolby Atmos Compatibility |
 Height |
918mm
vs
920mm
|
Easier to fit in smaller spaces |
 Max Input Power |
125 watts
vs
100 watts
|
Handle more power from your amplifier |
 Sensitivity |
96 dB
vs
95 dB
|
Play louder with same amount of amplification power |
 Base Surface Area |
753cm2
vs
757cm2
|
Takes less floor space |
 Price per pair* |
1038USD
vs
1198USD
|
costs less (*prices may change depending on the seller, location and time) |
| General |
Klipsch Reference Premiere RP-5000F II |
Klipsch Reference Premiere RP-5000F |
| Brand |
Klipsch |
Klipsch |
| Speaker Type |
Floor-standing speaker |
Floor-standing speaker |
| Power Range |
up to 100 watts |
up to 125 watts |
| Sensitivity |
95 dB |
96 dB |
| Impedance |
8 ohms |
8 ohms |
| Frequency Response |
35-25k Hz |
35-25k Hz |
Drivers |
|
|
| Woofer Quantity |
2 |
2 |
| Woofer Size |
5.25" |
5.25" |
| Woofer Composition |
Cerametallic cone |
Cerametallic |
| Woofer Surround Material |
Rubber |
Rubber |
| Tweeter Size |
1" |
1" |
| Tweeter Type |
Tractrix Horn |
Tractrix Horn |
| Aimable Tweeter |
No |
No |
| Midrange Driver |
No |
No |
| Crossover Frequency |
1900 Hz |
1800 Hz |
| Firing Direction |
rear |
rear |
Physical Specs |
|
|
| Height |
918.0mm (36.1") |
920.0mm (36.2") |
| Width |
208.0mm (8.2") |
207.0mm (8.1") |
| Depth |
364.0mm (14.3") |
364.0mm (14.3") |
| Weight |
17.50kg (38.5lbs) |
16.36kg (36lbs) |
| Enclosure |
Bass Reflex |
Bass Reflex |
| Finish |
MDF/Wood-grain vinyl |
MDF/Wood-grain vinyl |
| Available Colors |
Walnut, Black |
Walnut, Black |
| Grille |
Yes |
Yes |
| Moisture Resistancy |
No |
No |
Connections |
|
|
| Biamp Inputs |
Yes |
Yes |
Other |
|
|
| Parts Warranty |
5 Years |
5 Years |
| Labor Warranty |
5 Years |
5 Years |
Both are Klipsch, from different ranges - so the house sound is shared and the differences are mostly in scale, engineering and price.
| Area | Better | Why |
|---|
| Bass | evenly matched | Much the same reach (35Hz vs 35Hz). |
| Amplifier needs | evenly matched | Similar sensitivity (95dB vs 96dB) - both want much the same power. |
| Headroom | B | Klipsch RP-5000F takes more power (125W vs 100W) - more in hand in a big room. |
| Size | depends | Similar cabinet size - neither is easier to fit. |
| Expandability | depends | Klipsch RP-5000F II: bi-amping and Atmos drivers; Klipsch RP-5000F: bi-amping. Klipsch RP-5000F sits in a wider range (17 models), so a matched surround system is easier later. |
| Price | B | Klipsch RP-5000F is cheaper - $1,038 against $1,198, about 13% less. |
A Klipsch RP-5000F II B Klipsch RP-5000F
depends neither is better in the abstract - it turns on your room, your system or how you will use them. Only specs published for both speakers are judged; anything missing on either side is left out rather than guessed.
Which should you choose?
Klipsch RP-5000F has the edge on paper, though the margin is not large. The rows marked "depends" may matter more to you than the score does. Match it to your room: we rate Klipsch RP-5000F II the better fit for a small room, and Klipsch RP-5000F for a large room.
And remember what a spec sheet cannot show: how each looks in your room and whether the finish suits it, what dealer support and warranty are like where you live, and how they actually sound to you. If you can hear them first - ideally with your own music - that will tell you more than any number above.